Recently active
Did you put a contact between the two blocks? If you don't, the blocks will penetrate each other.
I added this as a Product Idea, and you can vote on it in the below link:http://communities.ptc.com/ideas/4021
Hi Matthew,First, did you import the STEP as an assembly as shown below?I imported the STEP as an assembly, and it lists all the components in the model tree as shown below.
Peterbilt Motors Company (Parent Company - PACCAR) will be presenting at PTC Live Global to show advanced workflows in Creo View. The three companies of PACCAR, John Deere and AGCO presented on Positioning Assemblies during the 2013 PTC Live Global event. My presentation will continue to build on last years presentation to show the benefits attained for the user community working with large assembly structures in a development environment. Here are a few key metrics worth mentioning:Open Assemblies 23 times faster in Creo View versus Creo Parametric and see the latest objects checked in by the user community within the large assembly structure.Publish an Assembly with over 1 million objects in less than 10 seconds.Significant load Reduction on the Windchill publisherReduce the amount of objects the user has to work with in a Creo Parametric Workspace. Having over 3000 objects in a Windchill Workspace connected to Creo Parametric results in a performance degrade.
Photo holder renders created students of Roy Handley posted in our community.Here is this week's Member Showcase Roundup, demonstrating our members' expert use with designs, 3D models, worksheets and how-to's:Feature Failure with Repeating Patterns (Answered)By Jeff WickhamDefining Weibull and custom function when using Monte CarloBy Barend BothaThe One Reason Why You Have to Come Back to PTC Live Global this YearBy Monica SimonCreo2: Create 3D model Annotation/Note Flat to Screen with a Leader?By Lawrence ScheelerSlicing solid model to sketch inside itBy David ProbstFlexible Pipe Design (Mathcad Prime 3.0 worksheets)By Fred LuskCan you make a closed and tangent-to-itself datum curve in PTC Creo 2.0?By Paul SobejkoNew Conflict Minerals DashboardBy James SweeneyHow to Extract Non-overlap TripletsBy Loi LeFeel free to click on any of the links above to discuss, like, rate or reply to any of this weeks' posts. Congratulations to our highlighted members for their incredible contributions
I don't think you can, as I had contacted PTC support on this "problem". Besides, why would you want to do this? Unless you received an assembly from someone else, and you're concerned that the assembly may have mixed units? I would like to see Units added to the Model Tree Columns, but currently, it's not listed. You have to set the units under the Units Manger, but you probably already know this. But this won't show it under the model tree.
Here's how to turn on your Datum Planes in the model tree (and keep them turned on):Select Tree Filters:Select Datum Planes and anything else you want:After you make the selections, you will want to save them:Save your model tree configuration file, and then you will have to map to it under Options using mdl_tree_cfg_file:
Here's a model that is closed and not ground. Look at the two images below, and see if this is what you're looking for. Also, I attached the model, and you can review the model tree to see how I made it.
Probably like: Closed not ground, as shown below.
Look at the attached file. The spring was created using a helical coil by equation, based upon the information you furnished. Take a look at this and see if this will help you get started in the right direction. In the attached file, I used:r = 5.4theta = 9.5*t*360z = 10*tfor the equations.
Technically, Creo could do the same thing. You could create a datum plane through the part or assembly, remove by extrusion or "slice" as you call it, the features to hide, then sketch the desired features from the datum plane. Then you would remove the extrustion or "slice" without interferring with the features that was just created inside the component or assembly.
Can you upload the file? I will take a look at it.
First of all, I wouldn't use a cut surface as a reference, and that's what you're asking Creo to do. It's a better practice to model off real datum planes. You want to be able to "slice" the model while in sketcher and use the surface that was created from the "slice". Right? And then you will "unslice" the model in sketcher to continuing with modeling? Inventor/Solidworks must have some built in function where you sketch on this "sliced" plane and it's reference to a plane and not the actual part surface, I assume this. What happens if you try to modify the part later and you find out that you can't modify it because a dimension is referenced to this "sliced" plane? I haven't seen this in Creo, but it sounds like a nice feature to have, as long as it acts independent.
Solidworks has both the h and p method for FEA. There is a great YouTube on it, and if you would like to see it, I can include it in this discussion. I use Creo Simulate, because we have Creo Parametric.
You can measure the area of a 2D drawing if you import a 3D model, as shown in Figure 1 below. If you make just a sketch in 2D, as shown in Figure 2, you cannot measure the area. So while in 2D sketch, you can and cannot measure areas, just depending on how you use it.Figure 1Figure 2
Antonius,The 2D area has been filled, but you cannot measure the area. Notice that the Measure function is deactivated (grayed-out). This was created in 2D, not importing a 3D. Sure, if you import a 3D, then you can measure the area. But if you create it in 2D, you cannot measure the area...or can you?
In today’s economic climate, you’ve probably got more work on your plate than ever before but no more time to do it. Or perhaps you’re being asked to bring more out of the box ideas and solutions to the table. Wondering where can you find the right tools to remain an indispensable resource for your company? You have to come back to PTC Live Global this year to continue to be a key contributor at your company. Here are ways you can achieve this:1- You’ll gain hundreds of new tips, additional ideas and innovative approaches from 20% more customers than last year. There will be even more minds to take advantage of!2- Have you gone through an upgrade since the last time you attended this event? Hearing others’ experiences will help shorten your implementation time and learning curve.3- Understanding what’s coming in future releases will save you time and energy trying to fix what doesn’t work for you today, and ensure you become an important advisor to your company about when and how
Read Only doesn't really lock the features in the model tree. If you make the features "read only", then any user can remove the read-only setting by selecting the Clean function as shown in the below images.
AutoCAD will perform the function you're looking for. If you have AutoCAD in house, I would recommend using it.
Chrome Rim render by 俊瑋 廖.Here is this week's Member Showcase Roundup, demonstrating our members' expert use with designs, 3D models, worksheets and how-to's:Issue with assembling angular constraintsBy WheelsofsteelChristoffel symbols and symbolic variablesBy Richard MessederEditing with the Warp Feature - Managing SymmetryBy Antonius DirriwachterDefining and Saving a Custom (Isometric) View in Creo Parametric 2.0By Nisheeth SrivastavaVessel design, man hole, nozzleBy Viswanathan KDid You Know? How to Create a Family Table By Thomas McKeownExcessive decimals in sketcherBy Mark EvansTips and Tricks session at PTC Live Global in June!By David MartinMaximize/minimizeBy Barend BothaFeel free to click on any of the links above to discuss, like, rate or reply to any of this weeks' posts. Congratulations to our highlighted members for their incredible contributions this week.Have you had a chance to demonstrate your expert use of PTC software? Either with a photo, video, worksheet, blog, docu
Do you want the extrusion that represents the man-hole to be a seperate component? Or do you want the tank to be made as one component? Either way, this can be performed. The below images are of one component, but I could have made it an assembly. But I think this is how you want the features to come together.Figure 1Figure 2Or do you want it to penetrate like Figure 3?Figure 3
Here's a link to FloEFD, as you can use FloEFD with Creo, CATIA, or NX:http://www.mentor.com/products/mechanical/products/floefd/Also, I attached the FloEFD brochure for your viewing.FYI.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.