Recently active
Kyle,Are you using a student version of Creo?
Go back to my post where I have "Normal" circled in red and read the instructions. Create a new dimension between the center of the circle and the datum plane. This will remove the light blue weak dimension and create a dark blue stong dimension.
Yes...they change colors as shown below...from light blue to dark blue.
It changes the direction of the normal in selected surfaces or quilt.
Since I brought the subject up, I thought I'd fill everyone in on exactly what the old Mathcad Collaboratory looked like, and why everyone liked it.I have often seen the question on forums of which view is better: flat or threaded. A flat view has the advantage that it's easy to find the recent posts, because they are at the end (or beginning, depending on the forum). The problem with a flat view is that the structure of who replied to who is not obvious, and unless people are religious about quoting when there's any ambiguity the thread can get very confusing. A threaded view has the advantage that it's easy (or easier, anyway) to see who replied to who. However, finding the recent posts in a long thread can be a real pain. It also suffers from the problem that the posts get narrower and narrower as the thread gets longer, and we end up with small columns of text in the middle of an otherwise unused screen.But it doesn't have to be like that! O'Reilly published software years ago, cal
That is correct, as shown below.
Dale,In Creo, you don't have to make seperate extrusions. I made the below model with just one extrusion.
Sumit,For the first question, I'm showing a model where displacement is in the -Z and the +Z is help in place with a planar constraint. Is this similar to what you're looking for? Simulate does have the capability to restrict movement in only the -Z direction. For the second question, try looking at pre-defined measures for displacement over time in the Z direction, as shown below. I'm not sure if this is what you're looking for. It would be nice if you could load an image and problem description of the project.
You cannot combine load sets if you're running nonlinear contact. You will have to run each load set separately and view the results separately.
Shaun,I think Mark has the answer here, and I'm showing the underformed overlay as blue (below), the color I pre-selected under System Colors.
I don't see how you will be able to stop the heat energy transferring from the plate to the shaft no matter what software you use, as both materials will expand. Interesting problem, and I would like to know how it turns out.
Herb,Can you upload a screenshot of the message? I've never received that message when saving an assembly. Is this happening in Creo Parametric 3.0 (F000)?
Creo 2 file uploaded (first example).
As part of our PTC Live Global event in Boston, MA, today we’re excited to announce a new partnership between PTC Community and the PTC/USER portal. For the past twenty-five years PTC/USER has been recognized as the independent voice for users of software produced by PTC and now those ties to the team here in Needham have been further strengthened with a combined effort to best support our online communities. Over the past several months the PTC Community management team has been working in union with the PTC/USER Board of Directors to discuss the eventual unification of our two distinct public discussion forums. The result of these joint efforts is an exciting new path for both PTC Community and PTC/USER, one that will best serve our robust communities of global product development professionals. There will be much more details in the months to come, but today I’m most excited to welcome our friends from the public discussions PTC/USER. I’m looking forward to get to know this entire n
Good day everyone,Welcome to the PTC Community Champions program and our private Group! You have all been chosen because of your product knowledge and your willingness to share it with other Community members - thank you!In order to break the ice, please take a moment to share somethings about yourself with the Group; as much or as little as you feel comfortable.Toby MetcalfI grew up in a small town in Central NY - Skaneatles, but have circled the globe and have lived in England as well as the Philippines.My hobbies (in addition to on-line communities) are my 3 children, hockey, and cooking.Twitter @Toby_Metcalf (technolgy - Social Media) @TMetcalf44 (Food & Wine).Best,Toby
Yong,It may be better if you submit this as a Product Idea, since you're suggesting this capability be added to Creo Parametric.Backgound information on AI (or .ai)Adobe Illustrator Artwork (AI) is a proprietary file format developed by Adobe Systems for representing single-page vector-based drawings in either the EPS or PDF formats. The .ai filename extension is used by Adobe Illustrator. The AI file format was originally a native format called PGF. PDF compatibility is achieved by embedding a complete copy of the PGF data within the saved PDF format file. This format is not related to .pgf using the same name Progressive Graphics Format.Welcom to the forum.
It sounds like you have a student version of Creo 3.0 where the license doesn't support the style function.
Library ModelsThanks to the reusability of 3D models in Creo we only have to make a part once and we can show it in an infiniate number of assemblies and drawing views. In the past much of these detail views would have been drawn with only the necessary detail the drafter determined to show that component. Today these fine details still impact us as minor processing delays rather than time spent sketching or stenciling them.Who makes library models? This has been a point of contention among our users and administrators. The users think the administrators should be modeling up library parts as a support function, but the administrators think the end users should be modeling the parts. It becomes a game of back and forth.The Engineer's point of view: I just want to put a bolt in my assembly. I don't have time to make a bolt. There should be a library of parts already made for me like going to the hardware store to pick one out.The Administrator's point of view: I don't know what bolt you
Matt,Welcome to the forum. Look at the below image to see what you select to sketch a datum point. Geometry points are the datum points when you're sketching.
PTC has automatic renaming when you select "Generate New Names", but I don't know of a way to increase the number in your example automatically, i.e., 01, 02, 03, etc. I'll look into it.
You can't change this in Creo 2.0, as I stated before. This is a new enhancement in Creo 3.0 for the draft feature. If you need more than 30°, you may have to create it with a different function, not draft.
Viktor,Are you talking about the maximum angle you can put on a draft? If so, Creo 3.0 allows you to make the angle up to 89.9°. Before, you could only make it up to 30°. The below example shows it at 52°. If this is what you're talking about, there isn't a config.pro option to turn this on in previous versions of Pro|E, not evev in Creo 1.0 or Creo 2.0., that I know of.
You can rename any subassembly or part, as shown below:Welcome to the forum.
What do you mean by "progressive number"?
What software are you using?Welcome to the forum.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.