Recently active
For now, I could only find the Snap Line functionality for 2D drawings, as explained below:
Patrick, The one hint that I have is that the spreadsheet follows the formulation of a NASTRAN RBE3 element.
Luis, Are you referring to Explode Lines?
If this was made in a commercial version, you may upload the model, and we can take a look at it.
Frank, I assume you want to add points to a spline, then use those points to move the spline? While in Sketch Mode: Double-click the Spline with the LMB to access Edit mode Right-click on the spline and select Add PointYou can add as many points as needed. See figures below:Figure 1: Double-click Spline in Sketch ModeFigure 2: RMB-click Spline in Edit ModeFigure 3: New Point Added
I have installed Creo 3.0 for the first time and when I try to make the interface with ANSYS it will come with error message :installation directory path: C:\Program Files\PTC\Creo 3.0\M010\ParametricStart command: C:\Program Files\PTC\Creo 3.0\M010\Parametric\bin\parametric.batThen when I ask to configure the cad it comes with this error:CP workbench Plugin not configured.........Invalid Creo parametric version !I pull my hair out but, tried many thig and still wont work. I noticed one thing that you cannot start Creo from either Parametric.bat or the parametric.exe or the one that says PTC startup file. So, it is bugging me so much.Creo runs fine from shortcut on the desktop that created automatically. This problem has been going on for a while and even in the university the same problem exist. Please help if you can. I re-installed the software from scratch and no difference.Thanks for your thought.
Can anyone know why app crashes (while installing Creo 2)Problem signature: Problem Event Name: APPCRASH Application Name: setup.exe_Creo Application Version: 30.0.2013.50 Application Timestamp: 5122ac47 Fault Module Name: KERNELBASE.dll Fault Module Version: 6.1.7601.17651 Fault Module Timestamp: 4e211319 Exception Code: c0000025 Exception Offset: 0000b9bc OS Version: 6.1.7601.2.1.0.256.1 L
Greetings all,Growing PTC Community and keeping discussions lively are goals of mine; I have an idea that I would like to run past you and get your honest input.As you know, blogging is a community feature, but I believe it is underutilized. I am interested in putting framework around blogging: gathering bloggers, creating a posting schedule, and (here is where I would like your input), gathering topics.You are all power users, what types of content would interest you? Product updates?Tips and tricks?General discussion: PLM, ALM, IoT?Thank you for your input.Best,Toby
Earlier this week I have seen a question by a user asking how to create a mapkey. While this is a typical forum question that could easily answered by one of the more experienced users, I started thinking about the topic a bit more.I had learned already that mapkeys are being used to automate recurring worksteps and thus can drastically increase your productivity. Wouldn’t it be nice then if users leveraged the great new world of Web 2.0 to share “their” mapkeys? Maybe they were already doing so?So I ran a few quick searches on the Internet as well as PlanetPTC Community – and indeed there were a ton of different resources. Some people even offered to share ”their” mapkey libraries.However, if you are a newbie in the field – or a total dummy like me – how do you know which ones provide real value, are syntactically correct, or, in short, can be trusted at all?I called one of our Application Engineers who gave me the advice to check which version a mapkey was created in, as sometimes th
About his 2014 PTC Live Global experience, attendee Kevin Long of Sensus said:“There is always something to learn. You come away with a ton of ideas, process improvements shortcuts, tips and tricks.”With an agenda that includes 330+ sessions for product development and service professionals and 14+ hours of networking, that has never been truer than at PTC Live Global 2015, June 7-10, 2015, in Nashville, TN.You’ve got to join us – even if you were at last year’s event – for new or enhanced skills, tips, best practices and contacts to save time, streamline processes and improve work quality or efficiency.This year’s event includes:Inspiring keynotes by New York Times best-selling author Malcolm Gladwell and innovative customers – all at the Grand Ole Opry HouseNew session formats, networking resources and presentersSmart, connected products and Internet of Things sessionsExpanded PTC University hands-on training – including new sessions on ALM and IoT topics – led by our most experience
ThingWorx postcard, 'Powering the IoT'
Will the next version of Jive have automatic/full time spell checking? Even better, could it show an autolist of synonyms to help non-English speakers create questions that don't require a two-level decoding scheme. For example, "I have doubts" is a common construction where the speaker really doesn't have a doubt, they have a question.
After hundreds of hours reviewing sessions; dozens of discussions and in-person meetings with customers, PTC product management, PTC University representatives, partners and PTC/USER leaders; and a lot of time spent by our creative guys, website designers, logistics team and a few other folks, we are happy to announce that the 2015 PROGRAM IS READY.With 330+ sessions and a lot of new content and features, you can’t miss this year’s event. Registration opens in a few days. Stay tuned!
David, Why would PTC need a requirement from Microsoft? You lost me on this one.
Können Sie das Modell schneiden? Welche Software benutzen Sie?
Scott,I submitted a couple of Product Ideas to help expedite the use of fasteners, but so far, PTC has not considered them. Ideas are attached below.Change fastener properties:http://communities.ptc.com/ideas/3784Copy fasteners:http://communities.ptc.com/ideas/3847Welcome to the forum.
Praveen, Thanks for posting.
War das seashell parametrisch, das in Creo geöffnet war? Wenn so, die Farbe und haben sind Sie versucht, das Modell zu schneiden grau? Ich denke, Sie angaben, daß dieses eine .stl Akte ist, die keine modellierende Geschichte hat. Werden Ihnen erlaubt, das Modell zu hochladen?
Stephen, I'm running Creo 3.0 M020, but not on a MacBook Pro, and I haven't experienced any of the problems in this thread.
Praveen, Thanks for posting the instructions.
Simulate works fine. I will take a look at the model in the morning. Someone may provide a solution before then. I just did a simple beam to verify my hand calculations, and it was perfect.Welcome to the forum.
Versuchen Sie, die unterschiedlichen Stücke des Modells dann des Druckes zwei zu schneiden, die mit vier Stiften verbunden werden können?
Pietro,Ich habe nie ein seashell gebildet, und es ist nicht sehr klar hinsichtlich, was Sie wirklich mit ihm tun möchten. Sie wünschen teilen das Oberteil und arbeiten auf ihm, in irgendeiner Form oder in anderen. Willkommen zum Forum.
The display of the datum axis in a drawing is controlled by the Show Model Annotations window. To show an axis:Select Show Model AnnotationsActivate the Datum Tab and Select AllSelect the desired axisThe below image is an axis in a cylinder in a 2D drawing.
22.12.2014 uvolnila PTC novou subverzi produktu PTC Creo 3.0 (M020)Tato subverze obsahuje například vylepšení modelového stromu, kde přibyla ikona pro skrývání sloupců modelového stromu. Jednoduše tedy můžete skrýt sloupce, ve kterých zobrazujete a editujete například parametry jednotlivých dílů v rámci sestavy.Pro podrobnější seznam vylepšení neváhejte kontaktovat AV ENGINEERING.Implementaci a technickou podporu systémů od firmy PTC v České republice provádí AV ENGINEERING, a.s.www.aveng.cz
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.