Recently active
Luis, Are you wanting to "snap" the annotation to a point, or do you want the annotation to point to the point?
Is the attached file a Student version or Commercial version of Creo?
New video tutorial for you: How to remove Suspended Components In this sort video tutorial you can learn how to remove assembly components by ProProgram in ProE Wildfire 4.0Regards,Vladimir
Did try to measure the radius by inspection as shown below?
Did you get it to work?
Dnes uvolnila PTC další subverzi PTC Creo Parametric, PTC Creo Direct, PTC Creo Simulate, PTC Creo Layout ve verzi 3.0, subverzi M030Uživatelé s aktivní službou maintenance mohou instalaci stáhnout z webu www.PTC.com Software DownloadsPorovnat vaši a aktuální verzi můžete pomocí Evaluate Releases with Update Advisor
Open a text editor, such as Notepad, and place the values for your points in three columns (x y z). The first column is x, the second y, and the third is z. If the value for any of these is zero, put a zero. Save the .txt file, then change the file extension to .pts.You can now import the points (shown below) and create a curve through the points.
The PTC University team recognizes that many of us learn best by doing, especially when it comes to new technical skills.That’s why the 300 hours of training PTC University will provide at PTC Live Global is conducted in small classes, where participants carry out hands-on exercises at their own workstation. You’ll receive guidance and have the opportunity to ask questions to the most experienced instructors while you complete exercises specifically designed to hone or build your skills in the latest PTC solutions.And, no matter what your experience level or training need may be, there is a format to match, including the eLearning Lab, two-hour sessions, full-day courses, or the PTC Creo or PTC Windchill Master Class. Here’s how you can take advantage of each:If you’ve got a quick question or challenge, or want to see the latest PTC University training and adoption tools in action, you should stop by the eLearning Lab. No pre-registration is required, and there is no additional fee.For
I don't want to Open a .rwd file, I want to Insert.
All the file types can be viewed in the Help Center in the below link:http://help.ptc.com/creo_hc/creo30_sim_hc/korean/index.html#page/sim/simulate/online/filelist.html
Maybe that's why PTC came up wth the mapped mesh AutoGEM control.
Open a .rwd file then try to insert another one where the two results will be side-by-side.
Using the Mats model, the graph is basically flat, as shown below. We're only talking about 0.008 mm or 0.0003 in difference. You can't really see 0.0003 inch with the naked eye.
In the first graph, there's only a difference of (1.6635 - 1.6555) = 0.008, and you could make this curve flat by changing the vertical scale, but still a little off. The second graph has a difference of 0.070, after changing the model.
You may go to your profile and create a product idea (as shown below). PTC has already added finite friction in Creo (image attached). Since WF4, PTC only had infinite friction, which was really just a slippage indicator. Now they have finite friction.
Does anyone have a lot of experience using the inertia relief function with practical applications and images that he/she would be willing to share? PTC knowledge base Document CS59477 and the Help Center doesn't give a thorough explanation on how to use inertia relief, and when not to use it. I have used this capability on a single component, and one of the advantages with this capability is that you don't have to apply rigid body constraints (a loaded body in free space). However, the animation is not what I desired, and how can the results be trusted? Any input on this subject will be greatly appreciated. Thanks.
Hi all,I received some feedback about the email best practices already, so I figured we could start a thread here. Assuming we end up adding all the TSEs to the group, it will also be a good place we can all discuss it.I would be interested in hearing an opinion from you folks.I have not yet heard a case where the TSAM is against (or in fact hasn’t requested) being included on all communicationssince this allows them to speak more intelligently on conference calls regarding a customer andhaving up to the minute case progress info (without referring back to the maybe current/maybe notStatus Details on the case).Shouldn’t the Outlook template automatically include the TSAM on the CC line for Premium cases?Likewise, shouldn’t the template automatically populate the Subject with case number and contact? Surely this isn’t any major amount of work to fix, and would result in making the template a usable time saver as opposed to a non-issue.I prefer “Greetings” to “Hi” or “Hello”. It is more
Deepanshu, Did any of these responses help you?
Do you want to make it invisible or just delete it?
Very interesting problem. I will take a look at it next Tuesday when I get back to my office. However, someone may have solved it by then.
In the old community Jive setup, we could see if a post was created by a new user.This was very helpful in welcoming new users.I don't see this anymore with the new Jive rollout.Can we get the user post count back on the post screen?It really does make a difference in how we reply. Seasoned users tend to get more direct answers.
My post in this link was for Creo 3, but see if there is some helpful info.https://www.ptcusercommunity.com/thread/59158
I just submitted a Product Idea yesterday to add a Community for drawings. You may vote on it if you like. . - PTC Community
It's missing in this discussion, but in my profile content there is a page numbering system at the bottom, and you can see "more" by flipping between pages. There is a new Community Help group where you can make suggestions to improve the web site.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.