Recently active
Example attached.
See Page 7 in the attached file.
Abilash,The IDD instructions for Creo 1.0 are attached. This should help some.
If you want to use the same name, delete the directory that stores the results.
Abstract: This paper somewhat humorously shows a physical model of the semi-fantastic idea of an underground tunnel that would connect the two cities, which would be traveled through by the so called gravity train. The idea has existed since Robert Hook first presented it to Sir Isaac Newton. This problem is described by the system of ordinary differential equations. The solution of equation system is obtained numerically using Mathcad applications (with units) and function Odesolve.INTRODUCTION According to the story [1,2], prior to the construction of the railway "St. Petersburg-Moscow", Russian Tsar Nicholas I while holding a ruler with one hand, he drew a straight line with his pencil between the two capitals of the Russian Empire. In the area of the Valdai Hills the pencil hit a finger of the emperor, and at this point the path made a little detour, which will be mentioned later in this article. And another anecdote, not historic but from recent days, says that one man
It's easy to make intersecting curves at the assembly level, as long as the surfaces were created at the assembly level (shown below). But if you want to copy-and-paste a surface from one of the components in the assembly and put that copied surface at the assembly level, you will have to use Copy Geometry. I copied part of the dummy plate surface and the copied geometry appears in the model tree as Copy Geometry id 232, and this surface is at the assembly level, which can be intersected with other surfaces at the assembly level.
When in sktech mode, you are not able to make hidden elements like sketches with the normal rightclick visible. it is deactivated.BUT, when you include this in your shortcut bar, you can make all that stuff visible without leaving the sketcher!
Are you the type of person who likes to test drive a new purchase or talk to other users of a product before you buy it? Or, maybe you’ve got a challenge but aren’t sure of the best solution? If either of these scenarios applies, or you just want more face time with a PTC product manager, then you have to come to PTC Live Global, June 7-10, and spend time in the Solutions Expo.Here are some benefits of doing so, as expressed by 2014 attendees…“Allows easy browsing of PTC partners for solutions to user issues”“The biggest benefits for me are seeing demos of upcoming functionality and the networking”Featuring more than 60 PTC partners and a PTC Pavilion, the 2015 Solutions Expo is the largest showcase of PTC and partner solutions you’ll find anywhere. That means you’ll have dozens of opportunities to witness demos, ask questions of PTC product experts, discover new ways to extend the value of your PTC solutions and learn more about new technologies.That’s not all you’ll find there. The P
參考大陸鄉民的配置【转】ProE Wildfire5.0配置文件新建config.pro文件,将其放在启动目录或安装目录下text文件夹下都可以。----------------config.pro内容如下:-----------------chamfer_45deg_dim_text iso/dindrawing_setup_file $PRO_DIRECTORY\text\iso.dtlformat_setup_file $PRO_DIRECTORY\text\iso.dtlpro_unit_length unit_mmpro_unit_mass unit_kilogramtemplate_designasm $PRO_DIRECTORY\templates\mmks_asm_design.asmtemplate_drawing $PRO_DIRECTORY\templates\a3_drawing.drwtemplate_sheetmetalpart $PRO_DIRECTORY\templates\mmns_part_sheetmetal.prttemplate_solidpart $PRO_DIRECTORY\templates\mmns_part_solid.prttodays_date_note_format %dd-%Mmm-%yytolerance_standard isotol_mode nominalweld_ui_standard isopro_unit_sys mmkspro_unit_length unit_mmpro_unit_mass unit_kilogramwindows_browser_type ie_in_processenable_3dmodelspace_browser_tab noweb_browser_homepage D:\Wildfire 5.0web_browser_history_days 6display_axes yesshow_axes_for_extr_arcs yesdatum_point_symbol crossspin_center_display nodisplay_axis_tags yesdisplay_coord_sys nodisplay_coord_sys_tags nodisplay
Tommaso,PTC says you can, and here is their response, but I couldn't replicate it for now. PTC stated:"You can create a curve using Intersect at the assembly level. To create the curve you will need references that are valid. For example if you are trying to show an intersection curve of multiple parts in one feature, a surface will need to exist that represents all the parts, which may require some trimming and merging. Another method that you could use to accomplish a curve through multiple parts is a curve through cross section, which is a right click option from the section in the model tree or view manager."I've requested a live webex session tomorrow for them to demo this.
It works well if you can open up the component and create the intersecting curve at the component level. You can then use that intersecting curve to trace on.
Bjorn,I believe your attached file is a Student Version of Creo? A Student Version cannot be opened in a Commercial Version.
Don,I couldn't replicate the instructions.
Hey all - I just completed a very big update to the document How do I Follow people, places, and content? and I'd love your feedback. Let me know when you have a moment to review.The overwhelming feedback I've gotten from PTC/USER members is "I don't know how to get updates on things that are important to me or that I already follow." My plan is to make sure our documentation is rock solid before our migration and that I make myself as available as possible any and all questions from members who have recently made the transition.Also - if you are a regular PTC/USER contributor and want to help us with our trial migrations let me know and I'll add you to our PTC/USER Migration Beta Program secret group.
Is it possible to put access to bookmarks on the inbox page? Currently I have to go into my profile and then pick "bookmarks" form the "more" menu. Not only is that a pain, but it's so well hidden most people will have difficulty finding it (I know I spent a very long time figuring this out!).
PTC Live Global registrants: We are extending an additional offer of two complimentary passes for yourself or your colleagues to experience LiveWorx 2015 in Boston, MA, May 4-7.You, your manager or colleagues can get an in-depth look at how the Internet of Things (IoT) and smart, connected products will impact your product development team. You will leave Boston with a greater understanding of how to incorporate sensor technologies and data collection into your products, and how IoT can help your organization gain a competitive advantage.These passes can be used by any two employees within your organization. Please note, you must maintain a valid PTC Live Global registration to take advantage of this offer, and you must register online by May 1, 2015.Information on how to obtain your passes will be shared, once you register for PTC Live Global, through the registration confirmation communication. If you are already registered, please contact -.Want to know more about the impact of IoT
Die neue Unite Technologie in PTC Creo 3.0 eröffnet dem Entwickler neue Möglichkeiten für die Herausforderungen im 3D-Datenaustausch mit Nicht-Creo Systemen. Melden Sie sich noch heute zu diesem kostenlosen Webinar inklusive Demos und live Q&A mit unserem Experten an. Weitere Informationen: http://ptc.co/LAtyA
The Networking Breakfast is one of the most popular event features. We want to make sure this year’s topics are relevant to you. Please share your ideas for discussion topics (challenges or subjects related to your experience with PTC products and solutions) by filling out this quick survey by Monday, April 20.Or, you can share your ideas by adding a Comment below if that’s more convenient for you.Thanks for your feedback!
Dear All,People asked me about what is the major application of my Bezier-X solution? Frankly, solving the NURBS boolean or CSG porblem is the final target of mine, and here it is now. I am not good to tell story in English, but if you are interested about what I have tried and what I have concluded, welcome to viste my new site of NURBS.Enclosed is a sample picture and its data for your review.Blue NURBS -- Nonuniform, degree: 3, Ring-mode: ON; Control points: 8; P00(315.00, 435.00), P01(226.00, 352.00), P02(209.00, 168.00), P03(372.00, 96.00), P04(597.00, 242.00), P05(315.00, 435.00), P06(226.00, 352.00), P07(209.00, 168.00) Knots vector: 12; { 0.00, 2.00, 7.00, 8.00, 14.00, 21.00, 29.00, 34.00, 35.00, 41.00, 48.00, 56.00 }
Ruben,Did you make this in the Student version? I already made something similar. Show a close up of the corner using reflection analysis.
Tommaso,Go to the Tree Filters as shown in Figure 1. Then select Datum plane as shown in Figure 2. Apply > OK.Figure 1Figure 2Datum planes appear in Figure 3.Figure 3
Based upon your Method # 2, you're stating that everytime a cut is made on the yellow block, the surface will automatically be red?
Select the pull-down until you get IGES, as shown below.I didn't get any quilts in the import.
I've already downloaded that. I was under the impression that this part was being added to another assembly, based upon the model tree.
Terry,I imported the same part, and it came in as a solid (see below image).
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.