Recently active
Product Idea to add countersink fasteners.https://www.ptcusercommunity.com/ideas/3783
The two corresponding edges must be parallel. I submitted a Product Idea to add countersink fasteners like Solidworks, but it hasn't received much attention.
Tommaso, Here is a post on the same topic: https://community.ptc.com/t5/3D-Part-Assembly-Design/Simulation-status-Failed-while-calculating/td-p/126281 I haven't seen this problem in Creo 3, but I've seen it in WF4 thru Creo 2.
Erik,I submitted a Product Idea over two years ago to increase the amount of RAM in Creo Simulate. Mark Fisher finally came back with a response, but when I questioned his response, he has yet to answer. I made the argument that increasing RAM was better than not increasing it at all. Please read that last two comments in the attached link.https://www.ptcusercommunity.com/ideas/2424
PTC Live Global, June 7-10, is not all about learning and networking. We want you to have a little fun in Nashville too. So, in addition to all the great content you’ll find in rooms and networking areas, we’ve organized a series of activities that range from relaxing massages to contests where you can win cool things to bring back home. Here is a first look:Compete to win prizesThe PTC Creo Battle Royale returns for second year with new opportunities for showcase your PTC Creo skills. Daily prizes, such as the 3Dconnexion SpaceMouse Pro and CadMouse, will be awarded and top performers will have the opportunity to battle for the grand prize (donated by Dell and AMD)!In the new PTC Knowledge Quest, you can test your knowledge of PTC Windchill, PTC Integrity and PTC Creo View. Get enough questions right and step into the WindMachine for a chance at the Golden Ticket.The Air Guitar contestThe PTC University team invites you to compete in their air guitar contest. With a little bit of luck
Victor,I think I've worked this problem before. It looks like a problem out of Dr. Toogood's book, but I'm out of the office this week. There is a dimensioning error in the problem. If you look at the two 2 meter vertical lengths (4 m total), it's not as long as one of the 4 m lengths below it. So I scaled it in Pro|Engineer, and it was around 1.5 m, been a long time since I worked it. But I think I put in all the datum points and used the beam tool with point-to-point connections. You can pick your own cross-section with the beam tool. Creo can do this, as this is a very simple problem to work.
What started out as a simple game with the purpose of having a little fun has become an amazing source of great ideas and suggestions for improving future events. Thanks a lot to all those who participated. We hope you had as much fun as we did.Now it’s time to choose the winner. From now until the close of business May 25, PTC Community members can vote on the best answers. All you have to do is to read the answers to the questions below and “Like” the ones you find more useful, original or simply fun (you can add your own answer too):If you had to describe PTC Live Global in one or two sentences, what would you say?If you could only experience one feature of the event, which one would it be?If you had the opportunity to add a new element to the event agenda, what would it be?If you could choose the topic of your on-site PTC University training sessions, what would it be?If you were recommending the event to a friend, what would you say?If you had to pick one thing you would improve a
Victor,If you're on maintenace with PTC, you may watch this excellent video on building a truss in Creo Simulate.http://learningexchange.ptc.com/tutorial/788/creating-a-structural-truss-analysis
Attendees usually rate networking as one of the main reasons to attend PTC Live Global. That’s why we continually evaluate networking opportunities and resources, listen to your suggestions and explore technologies and solutions to enhance those experiences. We’re happy to announce that these two resources are available now within the Attendee Resource Center:Attendee Directory: This tool will let you search for other attendees using different filters, connect with them and easily schedule meetings. Please note that you must create a profile and opt to share your information before you can connect with other attendees.Attendee DirectoryThe Exhibitor Directory: With this tool, you’ll be able to search for Solutions Expo exhibitors, filter them by sponsorship level or by product (using the Keyword search). You’ll see descriptions for each of them and where they are located in the Solutions Expo floor plan. You’ll even be able to request a meeting with the partner/s of your choice.E
Most likely it's related to a surface that is folded over itself. Using the diagnostic window, you should be able to identify the surfaces or rounds that are giving you the problem by selecting them. They should highlight the surface or round in the Creo window. Redefine the feature so it does not overlap itself. The surface should have uniform color.
Sagar,To upload files:Reply > Use advanced editor > Attach
sjohonstone,You're welcome. For the last example that I posted, notice that the number of p-loop passes decreased as the number of elements increased. That may not always be the case, but it was for your test model. Since the test model was so small in number of elements, I ran MPA setting at p1-p9, but for larger 3D models (more elements), I would start at p3, to reduce the run time.
sjohnstone,I ran the studies again with MPA at 1% convergence. The previous studies were MPA at 5%. The new 2D runs are:1. Default autoGEM (23 elements)2. AutoGEM control 1 inch max element size (110 elements)3. AutoGEM control .25 inch max element size (1334 elements)I saved all the results under one window, as shown below (easier to view). There is a 6.9% difference between the max stress in the first run and the last run for the hole, and yes, they all converged to within 1%. The convergence can also influence the solution. You cannot plot a convergence curve with SPA (Single Pass Adaptive).
sjohnstone,I ran your test model with my own boundary conditions and mat props, and as you can see in the below images, there is very little change in the solution and convergence. I made three separate 2D runs, 1) with default automesh, 2) autogem set to 1 for element size, 3) autogem set to .25 for element size.Study 1:Study 2:Study 3:
Today, more than ever, product development is changing. Smart, connected products and the Internet of Things (IoT) are providing all kinds of challenges – and opportunities – to those developing products.With IoT technology, you can collect vast amounts of data from products in the field and enhance them based on this information. And, at PTC Live Global, you can learn how PTC is closing the loop on engineering and providing you unprecedented insight into what’s really happening with your products.You’ll also be able to understand how and why we are making PTC Creo and PTC Windchill smart and connected, and what that means to you.How will you get that insight?KeynotesThrough Monday’s keynote presentations, you will discover how Internet of Things (IoT) technology can help you create, operate and service products more effectively, and how PTC’s solutions will help you achieve true closed-loop, product lifecycle management.The New Reality of Things: Bridging the Digital
It’s the representation of the evolution of the universe over 13.77 billion years. The far left depicts the earliest moment we can now probe, when a period of “inflation” produced a burst of exponential growth in the universe. Well, that’s that… but this article is about the “Representation” in PTC Windchill. Continue Reading here.....
Thank you for visiting our booth and we hope you have also had a successful day at the INNEO T-Day.
I need to upgrade to i5/OS V7R1 and am in the planning stage.Currently MKS Implementer 2009 is running on V6R1 on the i5 and I was wanting to leave the Implementer upgrade until after the Operating System upgrade but obviously need to know if Implementer 2009 was supported for V7R1 or if I absolutely need to upgrade Implementer first.I'm hoping nopw I have found the Impleneter group you guys will know the answer.
Nothing compares to the word of mouth. That’s why we have saved some testimonials from past event attendees for the last in this series of ROI blogs. Use these quotes in your conversations with your manager to help demonstrate the value of sending you to Nashville. And if none of them work, maybe you should challenge your manager with this testimonial from Gerry Quint from Centerline Windsor Ltd: “You have to attend at least once. If you are not pumped up after leaving PTC Live Global, you are probably in the wrong field.”Other attendees said:“There is always something to learn. You come away with a ton of ideas, process improvements, shortcuts, tips and tricks,” Kevin Long, Sensus“If you wanted to talk to the people who are actually developing the software to find out if there is a way to do something, this was a great place to go,” Jay M. Wiebe, BAE Systems, Inc.“Great way to increase your awareness of PTC products and to help with planning future initiatives,” Brian DeStefano,
Did you know that 15% of 2014 attendees used our ROI tools to justify their attendance at PTC Live Global? The resources they put to use most frequently included the letter templates, Advance Program, past-attendee testimonials and the list of companies attending.Interestingly, PTC Creo users found letter templates and discounts the most effective tools, while PTC Windchill users took advantage of the list of companies attending to get approval from their managers.Regardless what your PTC solution is, you can find quick access to all these tools below:Letter templates: Download the template that most closely matches your role, insert your personal or company information, and submit it to your boss. You can create a sample agenda in the session catalog that outlines the sessions you’d like to attend and submit it with this letter as well.o For Mechanical Engineerso For Engineering IT Professionalso All other attendeesAdvance Program: If PTC Live Global is your "one-stop solution"
See this thread: https://community.ptc.com/t5/PTC-Mathcad/Mathcad15-Help-with-Functions/m-p/120208#406239 It's very confusing for newcomers when they can't attach files without going to the advanced editor. I know you can't fix this, but now I have discovered that when someone replies directly from their inbox they don't even get the option of the advanced editor, and there is therefore no way for them to attach files. This is a whole new level of confusing! Can this be added to the dialog box when replying directly from the inbox? Also, is it possible to make "Use advanced editor" a little more prominent? Like Use advanced editor. Or Use advanced editor. Or To attach files use advanced editor.? Thanks
If your model is not classified, and if you're on maintenance, you could submit the model to Technical Support and request that they run the same type of tests. If you can upload it to the Community, I can run it on my PC and provide the results.
Yes, we’ve talked a lot about the thousands of best practices and tips and tricks from peers and PTC experts you’ll have access to at PTC Live Global. But if you‘re the type of person who says, “I’ll believe when I see it,” then you are in luck. We’ve interviewed some of the 2015 event presenters and asked them to reveal one of the many tips he or she will cover at PTC Live Global. And here they are! Share these articles with your manager to show the value of attending PTC Live Global.For PTC Creo users:Justin Roegner: Tips for Exorcising Unwanted LinksSometimes a drawing in PTC Windchill will reference a part that doesn’t exist. These “ghost objects” are relics from the original CAD file—typically a dummy that’s no longer relevant. But while PTC Creo doesn’t seem to reference the old model anymore, PTC Windchill just won’t forget about it. Read more.Scott Barkman: Tips for Loading Large Models FasterWhether you design luxury yachts or handheld medical devices, your assembly can includ
While video demos are a great way to show new, complex software products, Jamison Pezdek, a mechanical engineer from Boston-Power, Inc., says that "a one-to-one with YouTube lacks something." If you are tired of your manager’s suggestions to watch videos online or read books anytime you request some training, show him or her what a week of face time at PTC Live Global offers you:Jamison Pezdek, Boston-Power, Inc.: “Talking to a person is much more helpful than watching videos online”Brian Anderson, Oshkosh Corporation: “The benefit of being in person at PTC Live Global is the interactiveness of it”See our other ROI Tools:The First Tool: The Top 10 Reasons to Attend List
Die LiveWorx 2015 ist das globale Branchen-Event der marktführenden IoT-Anbieter, die die Zukunft der Technologie und den Wandel in den Unternehmen gestalten, um am Markt Wettbewerbsvorteile zu erzielen. Verpassen Sie nicht die IoT Keynotes auf der LiveWorx 2015 - Registrieren Sie sich jetzt für den Live Stream!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.