Recently active
I have Creo Elements 20.2.1.0Its possible to save my projects in 3D PDF? I dont see any save mode to this format.
When CAD tools have seen the day, the web was very modest(only static websites), now it has been invaded by web apps. Thanks to the power of Javascript, frameworks like(Angular, React, Vue, Ember, etc.) made it possible to have many desktop applications as web applications. Providing Creo as a web application will be an important event in its history, the integration with Windchill will become more transparent than the Workgroup Managers.
Triangles are used for many different situations while sketching. I would like to see triangle geometry as an option, similar to circles or rectangles.
Hello every oneI´m working on an assembly and I just finished it.A co-worker renamed a sub-assembly and now it shows this error "file name changed, not checked out by you".I can do check in and check out to my assembly, but I am asked to remove that error. Thanks in advance for your support and kind response.
This is a new sketch, not a part.I want to rename the two dimensions to x = 15 and y = 20, and use, for all my dimensions, mathematical operations on x and y (instead of calculating and typing in numerical values), as follows...For horizontal dimensions x1 = 5x/7 and for vertical dimensions y1 = 3y/5, and maybe down the road x5 = 2*x3 and y7 = y2/4.Is this possible in CREO 10, and is it possible for a part as well as a sketch?I cannot find anything of that nature in the sketcher, right clicking on a dimension in CREO 10 does NOT bring up the DIMENSION PROPERTIES window.Apparently the DIMENSION PROPERTIES window does not exist in CREO 10 sketching anymore.Would the normal mathematical operators be used and what would be the correct syntax, for both naming and using the names in the subsequent operations?Like + - * / (addition subtraction multiplication division) and so forth...
1. Describe the ProblemIn a lot of cases i require different isometric views in order to either do a drawing or just for screenshots to send around our team. I can dynamically reorient the model to where i think looks good, but it never looks as professional as an isometric view. Ideally i am looking for a feature from Creo to automatically create the 8 isometric views. Solidworks has a feature where you can easily press on the space bar and you get the 8 isometric views and more View Selector - 2023 - SOLIDWORKS Help.2. Are you using a workaround?Yes, you can manually edit the orientation to create the isometric views that i am looking for. This ends up taking so much time as to get correct3. What is the use case for your organization?Drawings can look cleaner, screenshots, renders, and quick reorientation required.4. What impact does this problem currently have on your organization?4 users affected, around 2 hours a week of lost time
1. Describe the Problem Currently you can not add a new point in between two existing points in the datum point table without accessing the 'Update Values' table. Why not add ability to 'insert point here'? 2. Are you using a workaround?Yes, by accessing the Update Values table you can add or remove points.3. What is the use case for your organization?Currently you can remove any point from the point table, it would make sense to have the ability to also add points here without having to access another dialog box.4. What impact does this problem currently have on your organization?This is more of an UI enhancement request to eliminate unnecessary mouse picks and any confusion by users thinking that you can't add a point between existing points.
creo 10.0.3.0 I can update a wire spools MIN_BEND_RADIUS, the corresponding minimum radius will be updated to reflect (in CABLE MFG>FLATTEN>LAY OUT). This does not seem to be the case with sheath spool (or perhaps a issue with bundles). I've tried:-Regenerating all models-Close/re-open-Modifying a bundle to use a different spool-Extracting wires and then adding them back in-Delete flat harness and start over
Creo 9.0.80 Section cutting plane lines have varying thickness when rendered. Has anyone seen this before or know the possible cause of this? The line font appears to be hidden font in some areas and visible in others. This drawing template is out of the EU, is this the correct render for cut lines under an ISO dwg standard?
Hi all, I'm using Creo parametric 11.0.1.0.I have a pattern of sketches. Is it possible to project the pattern associatively to a single sketch?I attempted to select the rule "All curves in feature" in Rule-based references via the chain selection option, but was unsuccessful. What'm I doing wrong? Is there an alternative method that works? Thanks
We use Creo 8.0.6.0. Is there a newer version of Autoaxis for Creo8?
Hi I want to add variable text to a custom symbol programmatically.
Please allow ModelCHECK to at least read the values of the mass properties Parameters like PRO_MP_SOURCE and PRO_MP_MASS, PRO_MP_ALT_MASS etc. Like this the users could find out if a model hast set its mass properties to valid settings. Often, there are imported models that get a material file set, but keep their mass source settings to PARAMETERS, and then all mass properties like center of gravity or inertia etc are not consistent. Or in the course of development, this or that material is used and the source may also be set to PARAMETERS at some point, but then geometry and maybe material changes before release, then it's also not consistent. Allowing ModelCHECK to at least read those parameters would give the possibility of finding files that are not according to standards at all and preventing errors beforehand. Since this parameter is not automatically designated (and cannot be set via ModelUPDATE) one cannot simply run a report in Windchill as with other parameters.
In order to make it easier to enforce the use of Drawing Templates within organizations, the inclusion of a config option to make "Use Template" the default option when creating a new drawing would be extremely useful.
I am Sangok An, living in Korea.I am trying to compare two steel plates—one with bending and one without—using Creo Simulate Lite (9.09). However, the results show that the plate without bending performs better, which is unexpected, and I am not sure about the cause.Analysis conditions:Material: SUS304Thickness: 6.0 mmFixation: The steel plate is secured to a concrete floor with four bolts.Load: 100 kgfI had attached result and parts,Best your regardss.o.ahn
I am using Creo Parametric Release 6.0 and Datecode6.0.4.0Buongiorno,devo eseguire dei fori obliqui su un solido ma non riesco a modificare l'angolazione.Grazie.
Creo 9.0I have fixed this once before after scouring the internet (all PTC websites included) and by trying options that were obviously not the fix, I stumbled into the fix. Not looking to have anything diagnosed, just looking for the super specific term that PTC uses to describe the corner anchor of a table. (view in My Videos) Sorry for the zoomed out video, but anything posted here is immediately public information. (read the terms of service) With the risk of being terminated from my employment this is the only example I am able to post.
Using Creo 8.0.9.0 I'm trying to create an assembly that can be shrink-wrapped into multiple different skeletons, each with a different construction of the parts. I was hoping to be able to use a single assembly that has multiple states, so when I create a shrink wrap feature in the skeleton I could just choose the state I want to be visible. The purpose of doing this is for repeatability in the future, as previously the only way to update these shrink-wrapped skeletons is to completely reassembly the geometry in an already "released" model without saving, and then shrink wrap into the skeleton using the "last displayed" view option. Here's a dummed-down example: the part in question is a lever, and I want to create an assembly that has the lever in it, and can show it at 90 deg, 120 deg, 85 deg, etc. with the click of a button, and then import the geometry in that state through a shrink wrap into a skeleton model. I know I could use family tables, but in my case the ass
When assembling parts in a model I prefer they default to coincident, so I have set the config option for this. However, if I am reconstraining a part due to a lost reference or want to use a different reference a distance constraint will change to coincident constraint loosing the value that it needs to be set to.A set distance constraint should not change to coincident when a new reference is selected.
To all, I am looking for a way to assign, in an assembly, the same pos_nr needed in GPLM / WindChill, for BOM structures, without needing to do it each time for the same component. In the images below, I would need to pick in the pos_nr column for each one, change to Integer, give the value and then designate them. I am looking for a way that I can easily add it to all of them at the same time. We are finding it time consuming to have to do each one individually. Any help is appreciated.Dennis J RehmerABB
1. Describe the Problem Reference: Ticket - 17628086 SPR - 15896293 Article - 434166 A drawing sheet has multiple views. The last view created, has a simplified rep or the larger assembly. Now, I can't show annotations of other components in the first views, that aren't included in the last view! As an example, let's say I have a sheet with a view of a car. I then create another view that has a simplified rep, showing only the engine area. Now, I go back to the first view, of the car, and I want to show axis from the steering wheel - I can't! Because it wasn't in the view with the engine! I can't believe this wasn't caught before. According to support, the effort to fix this is too large for a typical SPR - thus the enhancement idea. 2. Are you using a workaround?We have to delete the earlier views and create them again after the simplified rep view was placed!3. What is the use case for your organization?We are generating a template with diffe
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?10.0.2.02. What is the problem?The PTC Ideas community is really great, and many users invest a portion of their time to provide ideas, make videos and follow up to feedback and comments.When an idea eventually makes it into production , what if PTC had a way of rewarding the author?It could be a discount on the license renewal, or a time extension of the license, I think there are many ways it could be done in a way that doesn't cost much or at all to PTC, and which provides a token of appreciation to the idea author.3. Are you using a workaround? If yes, please describe it.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Over time we proposed some ideas and user feedback, some were implemented as bug fixes while one of these will be introduced in the near future5. What impact do
Hi all. I know this has been covered before but nothing I've read has helped me. Creo 9.0.4.0, Workgroup Manager 12.1.2.1, Windows 11 I login to either Creo or WGM and enter my credentials and select "remember me".I check windows credentials manager and the password is in there but the username is blank so I fill in the username.I login again to Creo or WGM and the password is correct but the username is my windows login. (Domain/user)I check windows credentials manager and the username is blank again I've checked Chrome and Edge and there are no passwords saved. I have to switch between Creo and WGM several times a day so this adds up to a significant amount of time! Any advice? Thanks in advace!Brad
Please include detailed documentation such as screenshots, images or video.When you double click the weak dimension below and type in 5 and press enter, the dimension is still weak.1. What product and version are you running?Creo Parametric 7.0.9.02. What is the problem?If a dimension is weak but already on the desired value, the intuitive tendency then is to enter the value. But what then happens is... nothing. You have to click on "toggle lock" and THEN enter the value.3. Are you using a workaround? If yes, please describe it.Enter the value, find out the dimension is not locked, click on "toggle lock", enter the value AGAIN and then it it locked.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Easy fix to speedup the work process.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)When small improvements are made
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0, 9.0, 8.02. What is the problem?Creo Parametric title bar does not show version information. It shows only "Creo Parametric". When using multiple Creo versions at once, this would be useful information.3. Are you using a workaround? If yes, please describe it.Create custom icon in Quick access toolbar for each version and using Start in UI.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Customers using multiple Creo versions would easily distinguish between different versions. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Every customer that uses multiple Creo versions simultaneously.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.