Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1 and 10.1.PVZ is made with modeling worker.2. What is the problem?Modeling has a special feature – “selective independent”.A PVZ cannot process this information. 3. Are you using a workaround? If yes, please describe it.No workaround possible.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.If using an assembly “A” two times in assembly “B”, you can show/describe with the feature “selective independent” different positions of the parts in assembly “A”. This information is stored in assembly “B”.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)All visualizations of new and migrated objects are wrong.People in production have no chance to view the correct situation.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1 and 10.1.PVZ is made with modeling worker.2. What is the problem?It is not possible to collapse or expand instanced based parts.There is a preference in General/Navigation “Collapse instanced based parts so only one is shown in the tree”, But this is not very helpful, because after selecting this preference, you do not have the option of selecting an instance-based part of the tree.3. Are you using a workaround? If yes, please describe it.No workaround possible4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.With collapse/expand you have a much better workflow, and the tree is much shorter.if using 1000 screws in one assembly => 1 line or 1000 lines.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1 and 10.1PVZ is made with modeling worker.2. What is the problem?After choosing a viewable in CreoView, not only the necessary layer is visible, also other layers incl. free measures are selected and shown in the viewing window.3. Are you using a workaround? If yes, please describe it.Deselect all layers and choose the viewable again, then only the necessary layer is shown, but after processing the action “open in new window” show all layers again.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This viewables are prepared for example for production people, to see only necessary parts, measurements and viewdirections regarding special situations.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity,
1. What product and version are you running?We are currently working with Creo Parametric 7.0.11.0 and Windchill 12.0.2.11. 2. What is the problem? In addition to our own requirements, this idea also results from the PTC article CS289412. If you have already registered a Windchill server in Creo Parametric and logged in there, there is no way to adopt this login credentials in a Toolkit app and access Windchill data using the REST API.The workaround described below must be used for each additional Toolkit app.After a password change, which must be done every few months by all users in our company, this means that the new login credentials must be entered several times after the Creo start.This is very inconvenient and cumbersome for the users and does not meet with their understanding. In addition, extreme care must be taken when programming a login data query and saving the login credentials to ensure that no mistakes are made in terms of security. It would theref
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.52. What is the problem?TIFF 600 dpi can not be exported from 2d drawing3. Are you using a workaround? If yes, please describe it.Other CAD is using for export4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Some of our clients expect documentation in this specification5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)We have approximately 5000 users and it is difficult to estimate hours of lost productivity
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo 8.2. What is the problem?it would be nice to have a config pro option for the pattern BUNDLE DEFINITION uses. Something like:auto_bundle_name_pattern B## where the ## acts like creo schematics where the first bundle is B01if this config pro option isn't used, then use the default naming convention in creo 103. Are you using a workaround? If yes, please describe it.in creo 10 we would have to rename each bundle that is automatically made via the model tree.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.some bundles in harnesses we care about names whereas the other bundles we do not (bundles made of tape)5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)just speeding up sy
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.0.0.02. What is the problem?Currently it is not possible to measure the angle like shown on the screenshot. In CED/3D Access a measurement feature named 'Measure angle between directions' - Measure angle between directions (ptc.com). That feature enables the user to measure it easily.3. Are you using a workaround? If yes, please describe it.no known workaround.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.As we use Creo View as the primary tool for documentation on the shopfloor it is absolutly necessary beeing able to measure angles like that.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Curretnly we need to rework/create drawings to show that information to the guys on the sh
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CREO Parameteric 9.0.6.02. What is the problem?Would like to have 2 columns added to the Simp Rep Tab in the View Manager Window that automatically shows the Simplified Reps "Last Saved Date" and who it was "Last Saved By". Being able to sort those columns in ascending or descending order will be beneficial too. 3. Are you using a workaround? If yes, please describe it.Workaround is putting the initialization date and/or initials of the engineers that worked on it last in the Simp Rep Title, which takes away characters from describing what the Simplified Rep shows. I've also heard about the Description Column, but I have not used it extensively and my concern is new engineers would not be aware of it either and end up not using it or updating descriptions incorrectly.4. What is the use case for your organization? Describe how your idea would work in context o
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 10.12. What is the problem?When going to create a New Figure, creo illustrate does not provide any settings that allow for Source File to display "Name" instead or along side "Number". Since the source files can only be published with auto-generated numbers and many Creo Illustrate sessions have multiple source files this requested improvement will improve the user experience. 3. Are you using a workaround? If yes, please describe it.There is no work around at this time4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Source files for our organization are very large. User would like to inherently know which source file they are creating a figure off of rather than loading and selecting through based on the preview section.5. What impact does this problem
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? WF4 to CREO82. What is the problem?The main problem is having the maximum dimensions of the piece for these reasons:1) I have to define the measurements of the blank to purchase.2) I want to define an automatic drawing procedure.3) I also want to have a cost price for the processing of the piece.I happen to have up to 100 parts to drawing and estimate.I need three numerical variables X Y Z that define the dimensions of the piece andother that definition its position in space referred to the main coordinate system (CSYS).3. Are you using a workaround? If yes, please describe it.Currently I draw an overall curve on the plane normal to the Z axis which mifrom two dimensions X and Y and then another curve on the plane normal to the X axis which gives me the Z dimension. Then through the relationships I create the parameters for the report withthe dimensions of the blank a
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo 7.0.9.02. What is the problem? When changing to a split quantity balloon to a custom balloon to support ISO standard balloons any split quantities are not kept. The initial balloon receives all the quantities minus the number of balloons for that component.3. Are you using a workaround? If yes, please describe it. Manual work to redistribute the quantities again.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. In one example it takes approximately 90 minutes to make this update due to the number of balloons and their locations on multiple sheets.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) Many users (200+) will spend probably an average of 20 to 30 minu
1. What product and version are you running?We have customers from CEDM 20 to 20.62. What is the problem?When adding a lip in to a plate when there is a big assembly loaded into Modeling, Modeling reacts very slow to these action. Same as adding a workplane etc. This is a huge performance issue.There is already a case logged for this: Article - CS391325 - Adding a lip leads to a poor performance in big, large assemblies in Sheet Metal in Creo Elements/Direct Modeling (ptc.com) The designer needs to wait until this command is done before he can proceed working. We had examples that a designer needs to wait 20 seconds before continuing. This is something that wasn't a case in version 17-18.1 and came in on version 19.3. Are you using a workaround? If yes, please describe it.No, there is no workaround when working with big assemblies.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Th
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? CREO PARAMETRIC 9.0.7.02. What is the problem? We have hand drawn wirelist schematics on a page of a cable drawing to show how a cable is hooked up. It is not a CREO schematic program it is only lines on a page depicting wires in a cable with connections to connectors on each end of a wire. There is text on the drawing that indicates wire numbers and signal/net name and AWG of wire. The text is not intelligently linked to the drawn lines depicting wires in the cable. I want to automatically pull off the information off of the drawing and determine from the drawn lines where the signal/net names go from point to point (connectors) from the graphical drawing. We currently cannot just pull off data from a CREO drawing like this and put the data in any kind of format like a table that represent the layout on the drawing. We als
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo schematics 102. What is the problem?when dropping a report table on the drawing, the lines between cells are not there by default3. Are you using a workaround? If yes, please describe it.very clumsy workaround for setting those lines up. not intuitive at all4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.a newer user might take about 15-20 min trying to figure this out. it's rather clumsy5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) Not much, but newer users will expect these tables to have the lines
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 102. What is the problem?Normally users open the part models from the assembly. ( Assembly- graphics screen- Open or Model tree open) . When user close the part, Creo session will never goes back to the assembly ( from where it opened from) instead it always show another model which is already open3. Are you using a workaround? If yes, please describe it.Of course we can look for the assembly but its annoying. Users expect when they close the model creo will show the assembly from which they opened seconds before. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This is happens always in Creo and this nice enhancement would be a time saving for every users around the world. Sometimes frustrating for everyday users5. What impact does this problem currently have on y
Sometimes we need blank the border lines of table, but for current functionality Line Display only can blank the internal lines of table, cannot blank the exterior border lines
When using an inset on a part and this part is assembled in an other orientation than the main CYS, one is not able to set the part within the inset to a isometric view according to its own CYS. The idea is to implement the functionality that the part within an inset can be set to isometric orientation according to its own CYS, so you don't have to rotate it manually.
My engineering department needs PTC to add the functionality to import Parasolid files into Creo Illustrate.
This is presently called cross sheet graphics. When rearranging items in a wiring diagram, it is frequently helpful for clarity to break the line representing the fiber and sometimes to reconnect them if the ends have been moved to the same sheet. The operation of breaking the fiber is automatic if one end is moved to a different sheet. However, if the fiber to be broken has both ends on the same sheet, you must disconnect one end, use the Extend Across Sheets command and connect the new end to where the one was removed. In order to reconnect fibers, you must completely delete the fiber and reroute it, including re-entering its data set. Simple "break" and "connect" processes would make this a lot easier to create automotive style function based hybrid schematics.
Article CS262259 In Creo Illustrate 6.0 ptc removed the support for Windchill Workgroup Manager. We can use only Direct Connection now. I tested some hours this connection and I think that It's a big regression. Our users add in the workspace Illustration sources to import. They add in the workspace c3di and illustration sources to change. With Direct Connection they can't use the Windchill Search, they have to browse Windchill folder (where there are thousands of files) seeing only the file name and not other info like number, name, ibas). In my tests the checkin misses the relation with the illustration source...then I can't see if the source was updated... For us this feature (Direct connection) is not usable and not acceptable. I'm asking to review this change asap or we will use 5.1 until supported and then we will think to change software for illustrations. Thanks Nicola P.S.: I tried to open a case without success (C15160287)
Whenever multiple users are trying to edit a markup, Windchill locks the markup to the first user that opens it up. Currently there is no way for end users to find out who has it locked. (Even the content panel in Windchill does not show who has it locked under the "locked by" column as this is more of a soft lock from just opening up the markup) It would be nice if the dialogue that shows "Markup object "123.drw" is locked by another user" would instead show "Markup object "123.drw" is locked by username". This way users can contact each other directly instead of submitting work orders to local support. It would also be good if Creo View indicated a lock icon and the ability to unlock from a dropdown/menu button for the user who has it locked. And if the user unlocks and its locked by another, Creo View should grey out Markup functionality with an indicator that the file is locked by another user. What happens is users creates a bunch of markups and tries to save just to
Add more than one guideline to an annotation
Dear developer,ist it possible to add to the standard analyze functions two for needs of tool makers and industrialization engineers:We miss badly such functions as analyze of projected surface and draft analyze.Creo Parametric has this function inside of Mold&Cast workbench - so needed functions are already there 🙂 For sure if whole spectrum of analysis tools of Mold&Cast workbench could be transfered to Creo View it would be an extremely big PLUS! Thanks and regards Sergej Hempel
Hello Community, What do you think of overhauling the Creo View navigation, regarding configuration and accessibility, especially in the area of the explore mode which is very important in the area of exploring design with customers / design reviews in an immersive context. Here is my example, if you switch the navigation mode in the global settings to ProductView and in the view section on the Model section to explore to get a more stable behavior in the walk through, the mouse navigation feels very unnatural. It feels like the up and down direction of the fly up/down - horizon up and down have the wrong order. Most other tools in the market work the other way round so a configurable interface would be very beneficial. I found no settings as shown. Most people would like to navigate like this, mouse to the right -Y fly right direction. Mouse up, move me up. What does the community think of this? Your Feedback is appreciated and counts. Regards
You can spend a lot of time applying the right textures and appearances in Creo Parametric, but when it gets published to Creo View, a lot of that is lost because it strips away the bump map information. Rough surfaces look smooth. Shiny metals look dull. Wood grains disappear. These are all from the built in appearances from within Creo Parametric, nothing custom. Creo View should be an accurate representation of the model, so it should also include accurate textures and appearances. In this image, the one texture that appears in Creo View actually has a texture image. The others have only a bump map. I'm not even sure how the wood grain works, as it doesn't specify either, just that it's oak (it's the mahogany appearance), which has some built in meaning.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.