Recently active
Creo10 & ProToolkit & Cpp... Button#1 (in UI_dialog#1) would have a callback, which would... step1) load DLL#2, and then step2) Call an exported Function (eg. "display_dialog_2") which would result in UI_dialog#2 being displayed alongside-of, or in-front-of UI_dialog#1. *But, I cant seem to get step 2 to work. UI#2 never displays. Any help&guidance would def be appreciated. Code example(s) even better.
I have a circular part with a rectangular keyway in the front plane.I have created an axis in the part normal to the front plane and referencing the right and top planes with 0.0 offsets. This is prior to creating any geometry.In the drawing of the part the axis crosshair is shown in the vertical plane and horizontal plane parallel to the keyway when the view is shown as front.If I rotate the front view by axis angle 45°, the axis crosshair are no longer shown as referencing the right and top of the part and parallel / perpendicular to the slot.Is there a way to have the axis cross hair fixed to the datums in the part, so that when the part is installed in an assembly , the angular dimensions can be called out depending on the position of the keyway. And if the part is rotated in the drawing the axis stay aligned to the keyway. Any help on this would be greatly appreciated.
Check out this video on MultiAxis Milling w Creo NC from PTC Application EngineersPresenters: Lee Goodwin (Solution Consultant, Principal) and Ryan Butcher (Solution Consultant, Fellow)Original Date Presented: October 17, 2023To dive deeper into the subject, check out MultiAxis Milling. (view in My Videos)
Hello, i am having a small issue, when i import a part, i am getting a error message that the part template is not found.i have not changed any settings nor has anyone in the company changed anything either so im a bit baffled why the import function has decided to lose the default templateanyone know how to check for the template or tell creo to search for it? using Creo Parametric 6.0.6.0
Does anyone know how to set a password for a custom catalog in Creo Schematics? I followed the given instructions, but I'm still encountering an error. F:\sch>"C:\Program Files\ptc\Creo 7.0.0.0\Schematics\x86e_win64\creoschematics\bin\password" set custome24 "ptc@123"RSDesigner Password Utilitychange_directory: cannot change working directory to custome24
When I update a feature that a copy geometry references I will change the model but the copy geometry or reference will not follow. In the latest instance I updated a hole. There is a sketch that references that hole and in the large assembly a part is assembled to that hole. The hole location moves accordingly but the sketch and part stay in the old position. This happens randomly. Sometimes opening a new session fixes the issues. Other times it does not. Otherwise I have to go into the following feature. Delete the reference, reselect the reference and then reconstrain. Creo 8.0.11.0
Hello Together, our company Blocks the acces for programs to the Documents folder so i need to change to config directory. I've already read that PTC help article about the IFX_USER_CONFIG_PATH but it isnt working for me. I'm adding it like this in the default ifx_start_mdl.cfg:IFX_USER_CONFIG_PATH "Path:\to\folder" I'm currently running Creo Parametric 9.0.6.0 on windows 10. (The Documents Block only applies to our win11 machines) Any guess what i'm doing wrong? Maybe editing the wrong config? Regards,
1. Describe the ProblemWe are interested in using Model Based Definition and putting our Annotations on our models for use in downstream processes in an effort to remove 2-D Drawings. We make use of Family tables on our parts as they parametrically grow/shrink in size by a set distance for each instance. When we place a dimension on our part to show the overall height or length of the part on the generic instance, the dimension is placed a distance from the edge that looks good, and works great in our combination state. In this case, our part is 4 Units High and 4 Units Wide. However, when we go to get the output for our next instance (in this case, a 2 Unit High by 4 Unit Wide option), the width dimension does not follow the edge distance (stays the same distance from the UCS it seems) and gets lost off the screen as the part shrinks. So, if we adjust our generic part to be a 2x4 Unit size, and dimension off of that size. Easy enough, right? BUT wh
1. Describe the ProblemAllow Creo Parametric to export from workspace without erasing all Creo active objects. 2. Are you using a workaround?No work around available other than launching creo parametric on a second computer.3. What is the use case for your organization?Workflow wise, one may be contacted at any point in the day to export any object from your workspace. Most of the time what you have open in Creo Parametric and what was requested to be exported are entirely different. The ability to export any item from a workspace and still maintain what is open in Creo (Possibly the most complex item in said workspace) is quite impactful in loss of time dure to being forced to erase all.4. What impact does this problem currently have on your organization?Tough to measure. I would estimate that the majority of engineers run into this weekly and or monthly depending on their role. The problem becomes more impactful when a large number of objects are open in Creo Parametric an
I am using Creo Parametric Release 5.0 and Datecode5.0.3.0Issue with “Fixing” Parts list table with repeat region fixing that pulls in data from a component parameter. We want to pull in information from assy component parameters and display info within a table column. Found that with this implemented, one is not able to “fix” the parts list table (which prohibits resorting).Example, component parameter assigned within assy context :NAME: REMARKSTYPE = STRINGVALUE = PURCHASEDAssy drawing parts list table has column entry fetching value: asm.mbr.cparam.REMARKSWorks as expected, reporting values for all components with component parameter “REMARKS”The problem is if I attempt to fix the table to prohibit resorting, I am met with the following error: “Can not fix index due to symbol.asm.mbr.CPARAM”The only way I can fix the table is by removing entry “asm.mbr.cparam.REMARKS” from parts lists table and also removing the “ASM_MBR_CPARAM_REMARKS” parameter from the repeat region’s relation UI
Mazak Europe cuts carbon with solar and smart tech—powering sustainable precision for MedTech, motorsport, and more.
It´s fundamental that the drawing could mauelly updated if a combined state in the model has been updated. Without this function MBD is not easy to use where drawing of a model is required. Also it would be nessary that you can compare in the drawing what have been changed and the current state.
1. Describe the Problemwhile you dimension/annotate a drawing of a part or assy, Notes with leaders and balloons with leaders along with dimensions SHOULD NOT MOVE if the extents of that view ends up larger/smaller.ive dimensioned this sketch, (say there are 100+ annotations on it) then the view extents get bigger (the light blue frame . notice almost everything moves. Creo should focus on making the annotations leader(s) the defacto truth and stop moving the text/balloon in a proportionate way on the drawings view2. Are you using a workaround?no work around yet3. What is the use case for your organization?saving hours on drawings where the views get larger/smaller for every creo user4. What impact does this problem currently have on your organization?adds hours to doing things that should not be need to be done.
1. Describe the ProblemCurrently in Creo Parametric, the Reference Viewer (Edit References dialog) only allows users to view and edit Assembly References; it does not allow editing the Component ReferencesThis means that when a user wants to change the references a component is constrained to, they must open Edit Definition for each part individually, locate the relevant constraint(s), and manually replace the references one at a time. 2. Are you using a workaround?The current workaround is to use the Edit Definition dialog for each component individually, manually rerouting its placement (Component) references through the Placement tab. While functional, this method is extremely time-consuming when working with large assemblies and does not support bulk editing.3. What is the use case for your organization?Allowing both Assembly References and Component References to be edited in the Reference Viewer would enable bulk editing of placement constraints, allowing users t
1. Describe the ProblemWe cannot select Datum Tag / Datum feature using API available(ProSelect()) in Creo Parametric through Toolkit. This behavior is similar for Part as well as drawing module.Please refer to the article https://www.ptc.com/en/support/article/CS320500?source=search&as=0 2. Are you using a workaround?No3. What is the use case for your organization?We want to select the Datum tag / Datum Feature through UI, and get its selection pointer to get its PMI information.4. What impact does this problem currently have on your organization?Not able to get select Datum Tag / Datum feature annotation while customization.
I am trying to hide the labels related to active combined states like Layer state , apperanace state etc.Also i want to modify or hide some times, the tolerance table label appears in the bottom right corner of the combined state. But i am not able to find any options to hide or modify these labels. Is it a limitation ? or is there any settings to control it. Please guide me if someone faced this problem.Using creo 8
Hello,i have an aluminium cylinder De60 Di54 L148 [mm]with the attached condition (Condition 1 e 2 . jpg)As a result of the thermal analysis (Thermal_analysis.jpg) i have what show in "Result.jpg" about thermal analysis I'm not sure that is correctCan you give me your opinion about it? Thank you
Hello, I would like to see if is possible to create multiple individual drawings from one main assembly. Currently our templates are set up so the revision level and initials displayed in the drawing are attached to the model and windchill. This works fine for the initial drawing that will get approved by the customer but because we treat each drawing as its own separate entity/part number and can be used to make multiple different end items, it becomes a massive headache. Currently we are having to create a family table with a separate instance per each drawing, which is a massive pain for file management and if we have to make any changes to a model once created. Also, since we custom machine and fabricate all of our products, we build our end item/complete assembly first then create the different supporting drawings by hiding components using component display. Any insight on how to make this possible would be greatly appreciated.
Hello, I am using creo elements/direct modeling version 20.6. I have noticed that it's still not possible to open a drawing straight from the model tree. Would it be possible to write a script or custom command to do this? Because now you have to go to the masterdata first and find the drawing there. Other solutions for this problem are also welcome. Kind regards. Siebe
We want to get details of every GTOL (Feature control frames) created in on the every sheet (sheet wise). session.GetModelWindow(model).Activate() sheet = model Dim drawing = CType(model, IpfcDrawing) Dim nsheets = drawing.NumberOfSheets Dim sheetData = drawing.GetSheetData(1) Dim test = drawing.ListItems(EpfcModelItemType.EpfcITEM_ANNOTATION_ELEM) Dim mItem = CType(sheet, IpfcModelItemOwner) Dim feats = mItem.ListItems(EpfcModelItemType.EpfcITEM_GTOL)But we cant get any GTOL in feats.We tried quering dimensions, we get those dimensions. but from mulitple sheets.How can i get GTOLs. how we can understand to which sheet they belong.
Hi, I've attached an example with two flexible assemblies. Each of these assemblies contains two parts whose x-position is controlled using a variable dimension. Now my task is to get the "actual" position as it can be seen in the main assembly. I obviously can't use wfcWComponentFeat::getPosition as this gets me the "as constructed" position. I tried to call wfcWComponentFeat::Refresh and wfcWComponentFeat::RefreshRelations before calling getPosition but this hasn't changed anything... Do i have to calculate the correct position myself or is there some kind of "trick" that i have to do in order to get the correct position? Thanks, Christoph
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?The Creo Illustrate Version used 12.0 (but all before showing same obstacle)2. What is the problem?If Multi Fidelity Representations are used in Windchill, the POST Publish do not respect or differentiatebetween the LOD coming from Multi Fidelity User Pref.View about content from Multi FidelityLooking to the ILS consumers and assuming the ILS Versions are fed from different Multi Fidelity levels.An user already started with HIGH Fidelity and consumed attributes and used measurements he had this:Simple Sample: If the next iteration fed from (just for visual identification used Bounding Box - but reacts same way with e.g. LOW). The C3DI Figures loosing all their already annotated information's or measurements w/o any notice.Result: 3. Are you using a workaround? If yes, please describe it.Unacceptable Workaround to view and Analyse each and every ILS.Unacceptab
1. Describe the Problem There's no quick way to summarize the Creo warning or error messages that occur during a regen. This problem gets multiplied when regenerating large assemblies which may generate 1000s of message lines during regeneration. Current Problems: Regen warnings and errors stream by the message area quickly and are very easy to miss or ignore. Finding Message Log button or opening the Trail file in a text editor (ex: Notepad, Notepad++) to see all previous messages is not something that most new users know about. It's difficult to find where the last regen started on large assemblies in the Message Log or Trail file. There often are a TON duplicate warning or error messages. Many warning or error messages are hard to understand and often don't include the name(s) of the related model(s). Some messages that should be warnings or errors are not identified as such. Here's an example of the problems: Possible Solution: 2. Are you using a workaround
I opened a drawing to make a simple revision and immediately had trouble selecting items. If I select a note the green box that normally surrounds the selection is offset and rotated. Creating a new note results in the same. I created a new sheet and switched the note to that new sheet and it is normal there. switching it back to original sheet and it messed up again. It only appears to be a problem on that sheet of that drawing. It is affecting tables in a similar way. Has anyone seen this and there is a way to fix it?
I am using Creo Parametric Release 10.0 and Datecode10.0.8.0on a bulk item PProMdlType::PRO_MDL_PARTProMdlsubtype::PROMDLSTYPE_BULKProParameterDelete returns PRO_TK_GENERAL_ERRORThis same code works fine on parts.The UI can delete these parameters. I am a bit lost as to why i cannot delete them. If i am suppose to be able to delete these, i will create a mini project and share the source.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.