Recently active
It would save a lot of rerunning of simulations if you could add measures and recalculate their value from an already run simulation.I would also be useful to be able to query results at a specific node or location.
Please include detailed documentation such as screenshots, images or video.Allow users to show parts and change applied colors in all figures at once. Allow colors/ appearance to apply to new sub-assemblies and parts. For Example: I have created an illustration of Assembly A, which contains part B, and Part C. I create 10 figures showing different orientations of Assembly A. In each figure, I apply a color to Assembly A, which automatically applies to parts B and C. I then modify Assembly A in creo parametric, and I add Part D. I update the illustration of Assembly A to the latest version which includes the new part D. In each of the 10 figures, part D will be hidden from view. I would need to select each figure and show part D. I would then need to select part D and apply a color to match the rest of assembly A. On a scale of 100 or more figures and thousands of parts which are being updated by multiple users, this is an immense amount of wor
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?We are using Creo Illustrate 8.1, 9.1, 10.1 & 11.02. What is the problem?Restructuring the SBOM is hard to perform when trying to maintain a specific order among the child-parts as dragging causes the moved node to end up at the bottom of the new parent level. PTC Case: https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=15839581?PTC Response: There is unfortunately no other way to change the order of the SBOM.3. Are you using a workaround? If yes, please describe it.No Workaround4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.To address the issues faced during SBOM restructuring, the following solution can be implemented: Enhanced Drag-and-Drop Functionality:Implement a refined drag-and-drop system that allows users to move parts to specific locations wit
1. Describe the ProblemDetail drawings offer a way to save a table to an excel file. However, if the table extends onto multiple sheets, selecting the table only selects the portion of the table shown on the one sheet. There needs to be a way or option to select just what is shown on the sheet, or select the entire table, to save to the excel file.2. Are you using a workaround?Save a copy of the drawing. Open the copy, delete the table extents so it does not span multiple sheets. Select that table and save it as an excel file. This is faster than exporting (saving multiple excel files from multiple sheets) and combining them within excel. Either way is frustrating.3. What is the use case for your organization?Easier and more intuitive use of drawing data.4. What impact does this problem currently have on your organization?Additional project time.
1. Describe the ProblemCurrently hyperlinks can only be in 'comment' cells in a table. There is no way to have a hyperlink for a part or assembly available in multiple tables (such as two separate BOMs e.g. a Master BOM and a Subassembly BOM) that can provide part or assembly specific hyperlinks in the same manor as part or assembly parameters. If there were a parameter type for 'hyperlinks" within parts and assemblies, and a report parameter type for hyperlinks, then hyperlinks could be available in any table by using report parameters. This should be a requirement of MBD when creating BOMs for Assemblies.2. Are you using a workaround?No. It is possible to copy a drawing with one purpose of BOM table with the commented cells filled, to another drawing. Then import that drawing into the original drawing, re-organize the newly added table as needed (e.g. keep the original BOM sorted by part number, and modify the second BOM to be sorted my materials). This is time inte
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?illustrate 92. What is the problem?cross selection highlighting doesn't work when the refdes component is an assembly!if i select this symbol in the schematic this item should highlightbut this item is an assembly and will not naturally highlight 3. Are you using a workaround? If yes, please describe it.collapsing each refdes component into a single item. (takes lots of time).4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.this would prevent having to collapse refdes assys each time we make a new illustrate file5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)seems like a common issue that has been overlooked ever since the cross selection for illustrate+schematics began.
1. Describe the Problem In some of my workflows I need to create specifically named points. The names can be fairly long and the default window size in the point creation UI does not allow visibility of the full name. It would be helpful to be able to re-size the name column in the UI to see the entire name without having to hover over the name and/or click into a point name and scroll with keyboard arrows. 2. Are you using a workaround?Yes, it is possible to hover over the point name to see the full text but this has to be done one by one for each point. You can also double click into the edit mode and scroll through the text with keyboard arrows, again this needs to be done one by one.3. What is the use case for your organization?Allow for quick reading of full list of points and their complete names, making checking for typos and consistent format easier.4. What impact does this problem currently have on your organization?Minor impact, just an annoyance that seems fairly strai
Add "solid_size" and "geom_size" to each model and make it possible to configure Creo to use these two new values as alternatives to "model_size" for determining drawing view sizes, text size of 3D annotations, and refit size."solid_size" would be the same as "model_size" except it would only consider solid geometry."geom_size" would be the same as "model_size" except it would only consider solid and surface geometry.We design a lot of models that are relatively small in size compared to the map part we are copying from. Because of this we are constantly having to set drawing views to "partial view" and draw a curve around them to keep the view boundaries from being enormous compared to the actual solid geometry. Also, the text size for 3D annotations is huge and the zoom refit button makes the model zoom out so far I can barely see it. If I were able to configure Creo to determine the view size, text size, and zoom fit function, based on the size of the solid geometry, it would save m
1. Describe the ProblemWe need direction of Ordinate/Baseline dimension direction.I have contacted PTC support and was recommended to submit an Idea to have an API for it.There is an existing API ProDimensionBaselinedirectionGet(), however API can work only with Baseline dimension type is DIM_LIN_BASELINE_PARALLEL. Please implement/enhance API to return non DIM_LIN_BASELINE_PARALLEL type Baseline dimension direction. 2. Are you using a workaround?PTC support confirmed there is no workaround at this moment.3. What is the use case for your organization?We would like to know ordinate/baseline dimension direction to analyze dimension.4. What impact does this problem currently have on your organization?One of feature in our product cannot work and produce incorrect false analysis result.
A highly customized Config.pro file can be confusing to manage and can become cluttered with duplicate entries - for both mapkeys and options. An option to specify a separate mapkey file would make managing these files much easier. This is even more important since the ability to have multiple sessions has been added. This would enable using different config.pro files for different sessions and easily use the same mapkeys. Regardless of the many possible post-installation work-arounds, this out-of-box solution would save a lot of (especially first time) users a lot of headaches.
Currently, many actions done in DRAWING mode cannot be undone.DRAWING mode should have full UNDO & REDO capability for all operations!
1. Are you using a workaround?Actually we are working as per PTC suggestion within CS322717: https://www.ptc.com/en/support/article/CS322717?source=search Workaround: Create a mapkey configuring default values of chord height, angle control and eventually step size just after having: 1. performed >File >Save as >Save a Copy, using *.stl file as format 2. and selected Customize Export2. What is the use case for your organization?We would like to define a company-wide export profile for stl formats. Currently we can only do this to a certain extent, as the chord length angle control and step size still have to be specified later. For all other export profiles, all options can be clearly predefined in the export profile and nothing else has to be entered later.3. What impact does this problem currently have on your organization?User intervention required, use of a mapkey instead of an export profile like all other export profiles.Describe the ProblemPossibility to define default
1. Automotive industry. Mechanical designer 2. Creo 7.3. When showing the diameter of a threaded hole on a drawing, the diameter symbol is shown in front of the diameter dimension. It would be better if an M or G, ... (depending on thread type) would be shown on in front of the diameter dimension. Now the diameter symbol has to be manually replaced by an M. If you forget to change the diameter symbol in the drawing, the drawing is wrong and bad parts are made.4. What is the use case for your organization?5. What business value would your suggestion represent for your organization?
1. Describe the ProblemThe sorting functionality in Creo 11 differs from the normal standard.Untill Creo 11 we named our top assembly with the prefix "0000_".By doing this, that assembly was always shown as the first file either in windows explorer or creo file explorer.This behaviour changed dramatically with creo 11 2. Are you using a workaround?Open the search function and tip in "0000" Then there is only one file shown.3. What is the use case for your organization?Our projects are structured in folders. All our users know, that the can easily open the top assembly just by pressing "Ctrl + O" and "Enter" Since creo 11 everyone complains constantly about opening the wrong files.4. What impact does this problem currently have on your organization?Affects everyone. It is anoying and not logical.
1. Describe the ProblemUnable to control the visibility of surfaces and curves (datum curves and sketch curves) on the shaded drawing view by layers of the drawing side in Pro/ENGINEER.2. Are you using a workaround?3D pdf or creo view, format but not possible for all customers and need external application to customise pdf format3. What is the use case for your organization?The display of datum curves and surfaces in the shaded view of a drawing depends on the model or assembly visibility. ptc article describing the issue CS43026 and organisation case4. What impact does this problem currently have on your organization?need external application and productivity loose to obtain the best result: 2 to 3 month for customisation with test Windchill is needed to automatize pdf files etc... dévelopment costs These new fonctionnalities will be good to simplify other case: specific surface, 3d curves for shaded view in drawing many thanks
1. Describe the ProblemIs possible to increase the number of decimal places in tolerances, without changing the global setup of the dimensions?I need three digit decimals for tolerance and just two for general dimension, but is currently impossible to set it as per default in different value. Is just possible to modify it in the drawing, but I need this as global setup. It would be great to change the decimal places as default for tolerance and for dimension separately. 2. Are you using a workaround?Modify manually the tolerance dimension. Always, but sometimes the drafter forgot this.3. What is the use case for your organization?Manufacturing and quality control4. What impact does this problem currently have on your organization?When the control quality manager have to check the mechanical piece with tolerances, have to take the book to check the complete value of the tolerance because the default is just two decimal place, but often the tolerances is composed by three decim
1. Describe the Problem For all situations the user edits a Creo material or material assignment we run a custom logic via "Creo Parametric Object TOOLKIT Java Free API". Hence there is no way to get the information from Creo when the user selects "Cancel" in the respective Creo dialogs and does not chance the materials at all. In this case we don't want to start any actions via "Creo Parametric Object TOOLKIT Java Free API". Therefore we need a way to get the user selection (OK, cancel) of the commands ProCmdMmEditMaterial and ProCmdMmEditMaterials ideally in "Creo Parametric Object TOOLKIT Java Free API" (JLink).This problem had also been reported in C17514420 with the result: "There is no supported API to do that".With this Idea I'd like to ask for implementing new functionality in "Creo Parametric Object TOOLKIT Java Free API" (best case .. or Toolkit if this is not possible). 2. Are you using a workaround?The workaround is to parse th
1. Describe the ProblemWhen stacking drawing tables side by side or on top of each other, the readability will be improved if it was possible to have the outer border of each table represented with a thicker line as compared to the inner lines of the table. In Creo Parametric 10, it is possible to change the line thickness of the entire table using "Format > Line Style > Modify Lines" and then select a random line in the table, but this will affect innner lines as well as outer border of the tabel. At this point it should be possible to select either an internal line or border line and have the format change work only on the lines of that category.2. Are you using a workaround?Some users are placing tables with a small distance in between, but visually that looks ugly.3. What is the use case for your organization?The idea would increase the quality and readability of output from drawings, e.g. PDF output4. What impact does this problem currently have on your organization?Easier f
1. Describe the Problem Reference: Case - 17509073 SPR - 15725772 Article - 428088 Often, when importing an EMN file in to an existing assembly, one of the components gets replaced. During that process, it removes component level parameter that was on the original component. For example, we use the component level parameter LINENUMBER. This parameter is critical as it is used for Windchill line numbers BOM. Often, we have an ECNs where there was an in-line BOM change from one resistor to another. When trying to update the CAD, and using IDF collaboration, the line number parameter gets deleted and we have to manually add it back each time. Please do not have component level parameters deleted on a collaboration replace. 2. Are you using a workaround?Manually readding the parameters each time.3. What is the use case for your organization?See above in the description.4. What impact does this problem currently have on your organization?It slows down ECN CAD wo
1. Describe the ProblemWhen following a master modeling technique in Creo, creating a drawing of an assembly composed of parts from different bodies does not support automatic dimension retrieval. This forces users to manually add dimensions to the drawing, which contradicts the efficiency expected in a model-based design process.Proposed Enhancement:I request the ability to show dimensions for imported geometry in assembly and part drawings. This feature would enable users to automatically display the associated dimensions from the model geometry, similar to the “show dimensions” feature for standard models. This enhancement would significantly improve the integration and usefulness of the master modeling technique, eliminating the need for manual dimensioning and streamlining the design workflow.2. Are you using a workaround?No. Currently, users must manually create dimensions for assemblies and parts derived from body geometries, which is time-consuming and prone to errors. Incorpor
1. Describe the Problem Reference: Case - 17494178 SPR - 15684520 Article - 426936 There are many situations, while working in Design Exploration, where items in a checkpoint are flagged as 'modified' accidentally and added to the Design Exploration Session. When working with Windchill and/or Family Tables, this could end up causing a lot of future problem managing that checkpoint and pushing out the design to a regular Windchill connected session. Logically, it would make sense, that if an object is deleted from a checkpoint, that it would also be removed from the Design Exploration Session. Then, we could add it back into the checkpoint, unmodified, and continue working in the checkpoint. However, that is not what happens. DEX still tracks the changes to these models, even if they are no longer in the Creo session. There are now no workarounds to clean up a checkpoint that has modification issues besides rebuilding the checkpoint from scratch. If the whole point of
1. Describe the ProblemUsers can't scaling model with different factor on 3 axis with Scale model Feature included in Creo Parametric. 2. Are you using a workaround?the wrap feature can be used to do this, but it seem much easy to include this option in the Scale Model Feature.3. What is the use case for your organization?customer demand4. What impact does this problem currently have on your organization?customer demand
1. Describe the ProblemThis is an improvement proposal for GD&T Analysis .To improve user experience, All dimensions in the Stackup Details Table are appended with balloons in the drawing area to make interpretation easier,Afterwards , When the tolerance analysis is completedall Stackup Details Table should be exported to EXCEL table (.xlsx)2. Are you using a workaround?No workaround available.3. What is the use case for your organization?Standard designer's work, modifying and validating dimensions using GD&T Analysis.4. What impact does this problem currently have on your organization?When the model is complex or has a large number of components, selecting too many dimensions will make identification difficult when using tolerance analysis. Exporting the results table to xlsx format will also make the result information more convenient for field personnel to use.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo Parametric 9.0.6.0 connected to Windchill 12.2. What is the problem?With Extremely Large Assemblies, the expand all button in the ribbon must not be used as it induces a download of the entire structure into the workspace with a resulting very large cache (+100GB). We would like to find a way to hide this icon in user interface. It would be nice to enable all the icons in this area of the Creo interface to be customizable for the user to hide/turn on. 3. Are you using a workaround? If yes, please describe it.There is no workaround except hope the user does not select this when working with a large assembly that depends on simplified reps4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Not having this icon viewable would prevent the user from making
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1.0.02. What is the problem?The default Primitive color is black, but the default color in Creo Parametric is Grey. The colors should be be more closely matched to improve product compatibility. This is a known issue, the Article CS26247 states the tool is working to spec so there is no plan to change it. But the spec should be updated, and the product updated.3. Are you using a workaround? If yes, please describe it.The user can make the change locally, or admins can push a global change.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Users opening for models in Creo View5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Our full user base is effecte
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.