Recently active
We have our customize setting for model check as ANNTN_MISSING_SURF_REF will be shown as error for our MBD project. This setting is required for our MBD project. By performing Model check interactive for annotated part annotation error is arriving. The error is arriving as ANNTN_MISSING_SURF_REF. The error is highlighting the annotations which are shown on model and also which are not shown on model. Model check showing error of all the annotation from almost each and every feature as well as sketch that they are missing surface reference. As it is showing error for all the annotations it will be very difficult to resolve the error. It is showing the error of annotations which are shown on model that are OK but the annotations from sketches as well as from datum and cross sections are difficult to digest. So rather changing the setting options of model check report for MBD, Please make a option in model check that only the annotation which are generated on model 
If we perform save as to a part or assembly we can get the option of ".pvz" while working in workspace on PLM servers in creo 7.0. We do not have the option of save as ".pvs", ".edz" etc. while working on PLM servers in Creo 7.0. The PVS format of any part or assembly may I have lighter version of the part or the assembly. The size of the PVZ format is much higher than the size of PVS format. The data sharing of the parts or assemblies will become much easier as the size of PVS file is much lighter than the PVZ format. We do have the option of save as in PVS format in the offline mode but we do not have the option of save as in PVS format while working on servers. Please add this option in "save as" while working in workspace on PLM servers in Creo 7.0.
Currently a structure of kinematic skeletons can be obtained only through the use of a "Motion Skeleton" (ASM) with a standard skeleton inside that generates several body Skeletons. It would be interesting that all these files could be condensed into a single PRT file (multibody) that performs the same functions as the Motion Skeleton. From the theoretical point of view this is possible, but obviously it presupposes a fairly radical reorganization of the creation of the Bodies within the part: it would be necessary to be able to manage them through connections (which is not possible at the moment). In this way the structure of the assembly would be considerably simplified: instead of a system of many files (1 Motion Skel + n Body Skel) consisting of very few entities, there would be a single file containing all the necessary kinematics. This also simplifies its management on the PDM side.
Currently you have to be a wizard to know precisely where in the datum feature symbol to hover your mouse to select it when in drawing mode. When you are working in the model in MBD selection is vastly improved. However when you are detailing a drawing moving your mouse to the center of the symbol does not cause the symbol to highlight for selection. This is even more frustrating when working on large assemblies where it can take a few seconds for each drawing entity to highlight for preselection. Sometimes when it highlights and then you click it doesn't actually select which makes you dream up terrible things to do to your computer. In the GIF below each yellow dot indicates a click of the mouse attempting to select the symbol. This idea is to make the selection of datum feature symbols in drawing mode more like how it works in MBD. Move the mouse to the center of the symbol and it highlights.
In continuation to the enhancement requests raised on the below ideas on Hole Table as per customer requirements from Tooling Industry, I am bringing attention to all of you on the one more very important enhancement request on the Hole Table. Hole table has to be created for Counterbore with Multiple stepped holes as below along with Hole Diameter with Depth parameter for each stepped holes. This is already available with our competitor UG-NX and is shown in above images . With this capability, Mold design Engineers will be able to show hole positions along with Hole Diameter and depth parameter more easily and quickly for the counter bore with multiple Stepped holes. Currently this provision is not available for more than 2 stepped holes. Enhancement requests have been already raised on Hole table for reference. Hole Table for specific hole types separately with an auto tangent leader from the Hole originHole Table- Provision for saving the Hole Table
Hello There is a command for auto-creating rounds - it detects concave and/or convex edges and then all are rounded in one go. I frequently make laser cut sheet metal components. They often have various slots and features that need to be rounded. The Auto Round tool would be great here since there are often dozens of small edges (normal to the sheet plane) that need rounding. But it is not very helpful then, at least for convex corners - because it insists on also rounding the outer edges of the sheet (parallel to the sheet plane). There is an option to exclude specified edges, but this removes a lot of the Auto and becomes almost as manual as selecting everything the hard way. In extreme cases with many reoccurring slots and cutouts, I even sketch them with all rounds included, and then pattern - because that saves me from having to hunt and peck at scores of tiny edges later. A workaround, but cumbersome. So I would be grateful if there was a possibility t
Hello, When using IFX it is not possible to select inactive surfaces. For expample the overall assembly of a product contains diffrent variants of subassemblies. Now in the design process we are adding the bolt/nut/washer to one of the variants by activating the subassembly and assembling the bolt. Right now we are using the OOTB functionality of Creo to assemble bolts like this since it is not possible to select inactiv surfaces with IFX. The provided solution within IFX by setting up an offset for the screw or the surface is ok and seen as a workaround. However the benefit of checking fastener connections automatically as well as placing the bolt/washer/nut on the surface after changing the thickness of the inactive e.g. sheetmetal is not given anymore.
Implement the ability to use Surface Regions (already available in Simulate) in part modelling mode. This would allow for creating surface regions that can be colored separately which would be extremely useful for showing paint/prime/masking locations on surfaces. The surface regions should be able to be shown/hidden via Simplified Reps or similar.
Currently on can import *.pts files which contain XYZ point location data. Product idea is to expand this functionality with point color RGB data. This kind of functionality exist with competing CAD platforms. The main use case is a retrofits, where one has massive point clouds from industrial/bulding and then points are used as visual refrence - instead of reverse engineer process supported today.
When copying features from another model - Paste Special, Advanced Reference Configuration, if the copy feature fails, Creo provides 4 options 1. Quit pasting this feature and continue 2. Keep the already pasted feature and Quit the Paste operation 3. Remove already pasted features and continue 4. Cancel the paste operation There should be a 5th option: Keep already pasted features and suppress/fail failed features. This would allow the user to use the failed feature tools to correct the failed features. I use this method to copy chunks of models (multiple features), but when it fails it is usually the feature before the fail that needs to be redefined, but the current interface does not allow me to correct. If I could just keep all of the features but have Creo go into failure mode, then I could redefine the previous feature to correct.
In 2D, if you show the axis of the pitch circle, the axis are aligned toward the center of the pitch circle and you see the actual pitch circle: In 3D (MBD), the axis of the holes of the pitch circle are always aligned vertically/horizontally. The pitch circle is not shown. The behaviour in 3D should be exactly the same as in 2D.
Currently you “Save As” a part or an assembly in the Creo, you are not allowed to enter its “Common Name”. You will have to call out the part and rename again. you are allowed to rename rest of parts except the top-level assembly that seems not to make good sense through. Otherwise, you will have to do the rename action in Windchill. Most of companies do have File Name (Number) and Common Name (Description). The benefit of doing the rename in Creo is that we clear understand exactly what the parts are by review the dynamic model window if it is a big/complete assembly.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Running on Creo Parametric 10.0.8.0, CreoView 11.1, Windchill 13.0.22. What is the problem?Representations generated from Annotated CAD models with combined states are adding a Default View and Empty View when representations are generated from Windchill.The response was that CreoView always adds these states.It is causing confusion when providing representations or users are looking at representations and the data has information not in the model creating a disparity with the viewable, which makes the delivered file undesirable for viewing model-based dataset.Would like an option to make it so these aren't part of the CAD representation, or have the ability to set which Viewable State the file would open in, and if those 2 Views have to be there for CreoView have a preference/option to hide those by default.3. Are you using a workaround? If yes, please describe i
There are quite a few options inside the copy geometry feature: The idea is to allow the admin somehow ,e. g. config.pro, to control which checkboxes are activated by default. Especially the unchecking of Appearance would make life easier for some use-cases
I am using Creo Parametric Release 10.0 and Datecode10.0.3.0We would like help understanding how to edit a Comfort Angle file (mca) for a Manikin comfort analysis.We are trying to correlate the PTC provided zero gravity file with NASA documentation and getting results that don't quite make sense.
When placing a view in a drawing, the boundary of the view is much larger than the actual solid part. I think it is referencing some datums or ref geo in the view. Is there a way to get the view to be proportional to the actual solid body in the view?
Hi Creo community, I'd like to get your feedback or opinion on the topic "collaborative engineering on part level"Note that we are using "classical" Creo & Windchill, no Creo+ Request from the users: We want to execute simultaneous engineering on different areas of a part.See my example:User-1 developing the outside design (or the design already exists)User-2 develops the green areaUser-3 develops the read areaFinally, the "zones" should be merged into one final part and MBD should be addedPersonally I'd prefer a split of the grey part into Bodies and merge them back at the end (boolean operations), the other options could be inheritance or copy geom (surface...) Your opinion on that? BR Georg
I am using Creo Parametric Release 10.0 and Datecode10.0.4.0I have written a C executable that will not run unless ucore68.dll is in my Windows path. I want to not be dependent on DLLs if possible.Here are the errors that I faced:The code execution cannot proceed because ucore68.dll was not found. Reinstalling the program may fix this problem.
When we originally did our .Hol files over a decade ago we decided it wasn't possible to call out both FREE and CLOSE in the callout formats. The Hole note on the drawing could only be shown as a Free(what we set it as). Is that still the case? When i add in CLOSE to the matrix/table it still just only gives me a Free callout and not the Close when Close is the value set in the model Thanks! DEFAULT_CALLOUT_FORMAT_DATA HOLE_TYPE THREAD DRILLED_DEPTH THREAD_DEPTH CSINK CBORE EXIT_CSINK CALLOUT_FORMAT CLEARANCE NO THRU_ALL NA NO NO NO &HOLE_INSTANCE_COUNT&HOLE_INSTANCE_X_SYMBOL <CTRL-a>n<CTRL-b>&FREE_DEC[.2] DRILL <CTRL-A>x<CTRL-B> &DRILL_DEPTH CLEARANCE NO THRU_ALL NA NO NO NO &HOLE_INSTANCE_COUNT&HOLE_INSTANCE_X_SYMBOL <CTRL-a>n<CTRL-b>&CLOSE_DEC[.2] DRILL <CTRL-A>x<CTRL-B> &DRILL_DEPTH
We are looking at installing ITI's CADIQ and I was wondering if anyone in the PTC Creo community is already running it and can give us some information. What we are wondering is how it compares to ModelCheck in functionality and quality of the analysis. ITI has told us that it is an external program, so files need to be saved to disk before running through CADIQ, which is a drawback when we have all of our data in Windchill. Love to hear experiences from those that have evaluated or are using CADIQ. Thanks
Hidden line removal for quilt not working with 2D cross-section from Sections used. I want image 2,3,4 to be like image 1 that hides hidden line for quilts. If i select 2d section the option of hidden line is greyed out. It does not remove hidden lines. How to fix? Thanks in advance. More to think ...more to creo!
I create a part using the BOUNDARY BLEND command and then OFFSET it. I wish to SOLIDIFY it now, I mean the offset geometry. Creo 11 Student Version does not like it. I am not sure why? Is there a GLITCH in Version 11 for the solidify command for geometry using the Boundary Blend?
We’ve been trying to find a more efficient way of creating springs and adding measures to them, but so far haven’t had much success. We’ve standardized a lot of spring parameters—names, orientations, and measures—but every time we create a new spring, it still takes too long to set up both the spring and its associated measure. Example workflow: Start with an empty model and a point at (0,0,0). Create a spring to ground with stiffness properties in the global coordinate system: Z = 10 N/mm X = 0 N/mm Y = 0 N/mm Add a measure for this spring and name it Wheel_1_Z. We’ve tried to automate the process using mapkeys, but haven’t managed to make it work. Question:What would be the best way to streamline or automate this workflow?Issues: Case 1: You select a point and press the Spring button. A simple spring is created, and the point remains in the buffer. But when you switch the spring type to Spring to Ground, the point list becomes empty, so you have to reselect the poin
Using Creo 10.0.2.0 Commercial license After I completed a model and associated drawing, we had a small issue. I oriented the model wrong.I based my sketch in the "Top" plane when I should have based it in the "Front" plane. That would make it line up better in the final assembly. I know it's not a big deal to rotate it in the assembly, but it would be "nice" to just have it fit correctly in the system without rotating. I figured out I could get the orientation I needed by right-clicking the sketch and selecting references. I then switched Top with Front, Right with Top, then Front with Right to get the actual orientation I needed. Great, the model itself was exactly what I wanted. Unfortunately, as one might expect, this completely broke all of my annotated dimensions. I tried to reassign the planes for the annotations, but it didn't work. I then regenerated the original model and tried just switching Top and Front, leaving right alone. I thought maybe if I on
Hi ALL,We are hearing and seeing a lot in action from many AI applications. CHAT GPT, Gemini,......I am looking for a AI app that can do a 2D for me from the image. NEED Suggestions on what out there available for this need.See attach as as sample to try on . Pl use to try and send me the output . Appreciate! THANKS IN Advance guys ! I Love Creo! So much to learn. So little time...
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.