Recently active
In Creo Illustrate 3.1 it's necessary like other products, export images with background transparent in extensions PNG or GIF, for example.
We need for assistance to export images files from Creo Illustrate Figure to any image extension (PNG, BMP, JPG) with transparent background.
We need a Bitmap Export incl. Alpha Channel in Creo Illustrate. Typically an Alpha Channel will be supported with GIF and PNG. Our Customer need to have SVG incl. Shaded Image, to put the Illustration on a colored rectangle in his documentation, as you can see in example 1. But the customer need to have what you can see in example 2!! To do Steps: 1. Export any colored illustration as SVG, with setting: thick-thin Lines, Bezierpath, Shaded Image, 300 dpi. Result: is an SVG with Vector Lines and a Shaded Image (PNG 300 dpi). 2. Next put the SVG file onto a colored rectangle. (open the SVG file in IsoDraw or any Adobe Product : Illustrator or InDesign). Result: the bounding box of the included Shaded Image is displayed white. Example 1 This is the result the customer need to have. The SVG File should have an Alpha Channel to get the colored Rectangle without the white bounding box. (This is a prepared SVG file for your demonstration) Example 2 If any
1. Describe the Problem Reference: Case: 17891712 Article: CS451598 We had created a few custom appearance .dmt files many years back and only recently noticed that all colors are sorted alphabetically (good) except for the first color in the .dmt file (bad)! In our mind, it should have been alphabetical! The response from PTC, in the article, says "The reason to sort the default color first is so that it is easily accessible for users to restore to its default setting." I'm not sure that is intuitive to the user. We weren't aware of this 'exception' for many years. If someone wanted to sort it first, they could always rename it such that is is earlier in the alphabetical sort! 2. Are you using a workaround?Editing the .dmt file, such that the first color is the first one of the list alphabetically. That means, that if we ever add a color which should be sorted even earlier, we need to remember to put it in the beginning of the file.3. What is the use case for your organization?Ma
I am using Creo Parametric Release 10.0 and Datecode10.0.8.0While trying to set up ModelCheck, the instructions say to go to "To configure the Creo ModelCHECK settings, click File > Options > Environment > ModelCHECK Settings." However, that menu option (Environment) is not available to me.How do I get File > Options > Environment to become available to me?Here are the errors that I facedNone
I have a part with Appearance State already defined, how do I "link" that appearance to the assembly? Context: I already defined 3 appearance states of a part by assigning colors to various surfaces (for texture map, finished product color, and the default model color). In the assembly, is there a way to quickly switch between these Appearance States of the part? The appearance state of the assembly seems completely independent of the part's appearance. I figure it is to be done via layers or representations, but had zero luck. Thank you.
I am using Creo Parametric Release 11.0 and Datecode11.0.6.0Unable to find where Creo Chromium-browser-cache is located for Creo 11.0.6.0 on the client to be able to clear it at every Creo start.
1. Describe the ProblemIn Creo 11, SMT_THICKNESS is no longer possible to edit from the Edit Definition dialog (or Edit Dimensions for that matter). You have to open menus to find it. This is not at all efficient. Please restore the previous way of editing it.2. Are you using a workaround?As stated above - via the Preferences menu.3. What is the use case for your organization?Any time you create a sheetmetal part and want to change the material thickness, which I do a lot since almost everything I work on is sheetmetal.4. What impact does this problem currently have on your organization?It's more time-consuming than before to do this.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
I am using Creo Parametric Release 7.0 and Datecode7.0.8.0Basically I’m trying to learn how to create a hole feature UDF with pro program embedded in it where pro program would be prompting user to read values from a text file which would create a different size hole each time the UDF was placed. If I had a part model that had 3 different size tapped holes, could I place the same UDF 3 times but each time read the text file (modified with new values) to create a different size hole (8-32, ¼-20, etc.) Or is this not what Pro Program was intended to do?
1. Describe the ProblemWhen the user runs ModelCHECK on an assembly. ModelCHECK looks at each model individually. If the user has objects in Read-only they have to wait and click "OK" for each object. This wastes a lot of time. ModelCHECK should first run all the models against the conditions.mcc file, then report all the model warnings at one time. (function() { var wrapper = document.getElementById('lia-vid-6377533476112w834h540r776'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos)2. Are you using a workaround?Be very careful to not click "All Models". Or, kill the Creo Parametric sessio
Creo View 12.1 & Creo Illustrate 12.1 have Released! The Visualization family of products, Creo View Clients, Creo View Adapters, Creo View Toolkits and Creo Illustrate have released. When considering updates to any of these products, it is recommended to update all Visualization products to maintain compatibility across the Enterprise. Key Highlights Creo View Web 12.1 Launch Introducing Creo View Web: Seamless Visualization, Anywhere We’re thrilled to announce the launch of Creo View Web, a major milestone in making visualization more accessible and collaborative across the enterprise. What’s new today: MVP with limited scope - for now Browser-based access to 3D content—no heavy installs required Faster collaboration with teams across locations and devices Streamlined workflows integrated with Windchill for easy access Looking ahead:This is just the beginning. Future updates will bring 2D drawing support, advanced measurement and markup tool
When multiple people are reviewing a file in Creo View, there is the capability to pull up any existing markup annotations. However, you have to switch around to see the different views, or pull them up side by side. It would be nice to show annotation sets like layers on the view so you can see every else's comments as you enter your own. Optionally turned on of course as everyone uses annotation sets differently. Real time collaboration would be great and next level, but next best thing would be showing all the saved annotations in the same space. Mock-up of how the idea could work:
It would be useful to be able to move a copied sketch around as if it was a single block. Currently when you paste a sketch you are given an opportunity to move it as a block, and then future moves run the risk of deforming it if you aren't very attentive. See below for an example of this issue. I would like to be able to dimension it from other entities without changing the existing point relations.
Reference Support Ticket #15518380 Reference SPR#11242864 We have noticed that if the Default assembly representations does not include a component, when a PVZ file is created, those components are missing without any way to view the master rep. There are 3 'Default' Viewables within this PVZ file and none of them show the master rep. However, from the Windchill cadworker, the generated viewable has one of these default Viewables be the master rep. Why? I would think there should be some consistency? Support says that this behavior has to do with the way the visualizations are generated. When being done manually, the master rep is not included. When done via a batch tool, like the cadworker, it is included. I would think that if there are 3 'Default' Viewables, then one should be the master rep (and named 'Master'). @mneumueller
N-Sided patch should be brought again. Not as an a obsolete feature. It should be refreshed! For the ones who works in metal stamping, will understand the need https://youtu.be/GeQcWSLlTYc
Be possible to create curves on bodies, quilts, surfaces, with an angle to a specific direction. See from solidedge: https://www.youtube.com/watch?v=pPCrpZyi1RE From NX: https://www.youtube.com/watch?v=oEeNlSsp5e8 In both videos, the isocline curve is applied to a sphere. The particular case of a sphere is simple to create those curves. But for a complex part like this, is not that simple! Specially with the variable radius.
If we select a datum plane, the View Normal will reorient the view Normal to the datum plane, IGNORING the positive negative side of the plane, which is the desired behaviour. The side selected of the datum plane is based on the current view orientation. This is the correct algorithm. But if we select a planar surface, the positive side is not ignored, which makes the view always be shown from the same side of the planar surface, instead of taking into account the current view orientation. The algorithm should be improved to treat planar surfaces the same as datum planes, ignoring the positive side of the datum plane / planar surface (or even axis or edge orientation), and only orienting normal to the datum plane / flat surface/ axis / straight edge, taking into account the current view orientation. With current implementation, when we select planar surfaces or edges, we have to select the other "Reorient" icon and click multiple times to rotate the normal view 180º. This could
Idea: Pattern option needed for pattern along curve for equally displacement (not distance / curve length which is currently available) We need a resolution in Creo Parametric 8.0 for a chain assembly. We want to assemble a chain in a curve using a curve pattern. But the pitch distance is not equal in the straight line and in the curved path. It is the same along a straight line and varies along curved paths. This is critical assembly and so we should assemble the chain as exactly as they are in real assembly. How to assemble a chain in a curve using a curve pattern without changing the pitch value? 1) There may be a lot of ways to assemble the chain links in a curve. But chain assembly is used universally and so there will be a simple solution to do this (For instance, pattern). So, we want to assemble the chain links using "pattern" along the curve or else a very simple method to do this. Because for a long chain assembly we could not assemb
It would be useful to have an option to make the faces which intersect a cross-section transparent. I frequently want to see 'behind' a face, so select it for a section view, but the view still displays the geometry which is incident with it. For example, when arranging the contents of a container it is useful to see behind the internal wall faces. However, to achieve this in practice requires selecting a plane which is infinitesimally offset from the desired plane.
most of Toolkit APIs like ProMdlMdlnameGet() or APIs calling parameter names returns names in upper case only. There should a toolkit API to provide the Model/Component names with Case Sensitive.
When updating old drawings and replacing a title block/sheet by a new, known parameter such as "&dwg_name" seem to be forgotten and need to be retyped manually in an upcoming prompt. R&D made this change in Creo 4 M040, but it's proven to be more of a hassle then a solution for updating old drawings. We'd like to set it back or have a setting to toggle this.
It happens quite regularly that I create something like a set of Simplified Representations, for illustrations of assembly steps in various documentation. They are then named Rep0001, Rep0002, Rep0003 and so on. And then I often figure that I would like to make intermediate steps somewhere, so I have to renumber ALL the following steps, starting from the bottom so as not to try to make Rep0004 into Rep0005 when that already exists. Since it is unlikely that I will ever make 9999 SimpReps in the same assembly, I feel that all those numerals would have been better assigned if the numbering was Rep0010, Rep0020, Rep0030 and so on. That would allow me to slip in a Rep0015 or Rep0025 without having to renumber a dozen following steps. While we are at it, please consider how other lists follow the same pattern. Family table instances are named like ABC ABC_INST ABC_INST1 ABC_INST2 I would much prefer ABC ABC_INST010 ABC_INST020 ABC_INST030 So that I
If an article has a drawing, and I save it with a new name, I have the option to also automatically duplicate the drawing with the new name, and references are redirected accordingly. ABC.PRT has drawing ABC.DRW ABC.PRT is Saved As DEF.PRT - it automatically gets a DEF.DRW using DEF.PRT. This does not work on subcomponents of assemblies. I can in one operation Save As GHI.ASM (containing X1.PRT and X2.PRT) to JKL.ASM (containing Y1.PRT and Y2.PRT that are Save As copies of X1 & X2) and the drawing GHI.DRW will also be duplicated into JKL.DRW. But there will be no Y1.DRW and Y2.DRW. The option to also Save As the drawing files is not there. This is a major pain, because if I want to fork an assembly to test some new design and wish to preserve the painstakingly detailed drawings, I can only Save As the assembly, then I have to individually open each part and Save As them, and then replace them one by one in the assembly. And the assembl
The current custom symbol tool is very hard to use and limits the user greatly. There are many places for improvement and I have noticed many other users in this forum are trying to compensate for the tool's lacking by creating their own user interface over the existing symbol tool. I think they tool needs a complete revamp in order to bring the capabilities up to a more modern feel. Some of the areas that I have seen issues are:- The inability to reorder groups.- The lack of any sort of if/else type controls means you cannot handle complex situations.- The lack of constraints in the symbol sketcher makes it harder to have flexible symbols.- The inability to have a single variable text show up in multiple places makes using the symbols much harder. - The over simplification of the origins for locating purposes.
The current option "start_model_dir" should be for just that, models. There should be a similar option "start_drawing_dir" for drawing templates. For our company, managing these separately would be more functional across the various organizations, and precludes the need for maintaining identical copies of template data in multiple locations.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.