Recently active
With Creo 7 has come a new behavior of displaying UI windows when running mapkeys. There is a legacy config option visible_mapkeys to make UI elements invisible when invoked from mapkeys but it only affects menu manager UI elements which are not really part of the GUI any more. With the migration of the UI it no longer addresses the issue (and has not going back to WF release). I propose that the config option functionality be updated to deal with all UI elements being displayed when invoked from a mapkey.
When you have a relation in a part or assembly and use the copy paste functionality to copy-paste a part or assembly to another assembly, the relations are also copied. This leads to unwanted relations in the relations file. See also article CS282060 https://www.ptc.com/en/support/article/CS282060?&language=en&posno=1&q=CS282060&source=search
In Creo 8, you can not change a reference pattern type for a sketched hole, like you could if you had a point pattern. The sketched hole is supposed to replace or be better than point patterns, yet it doesn't work well with reference patterning. One assembly shows the reference pattern when using sketched holes and the other when using point pattern. This is a pre-Creo 8 reference pattern of a pattern of a pattern. Notice how we can change the reference type from feature, group or both. This is a reference pattern of a Creo 8 pattern of a sketched-hole. Notice how we can not change the reference type. We should! If this is supposed to be the newer/better method for creating multiple holes, than it should have the referencing capabilities that the older method had as well!
Currently, there is no way to modify the size of a format. This eliminates the use of save as to easily copy a format and the modify the format elements to fit a new format size. The user has to start a format from scratch every time a new format is needed. Also, the origin is always in the lower left of the format. Traditionally, drawings have the titleblock, revision table, etc. on the right hand of the drawing. This means that when a user changes from one format to another, all views, tables, etc. are in the wrong place, and have to be shifted. Making the format origin on the right would allow changing of formats without having to move all of the drawing elements. PTC please allow the format size to be modified so users can use save as to create new formats, and please allow more options for the format origin.
Currently when you install Creo the icons for all versions are identical (so the Creo 5 icon is the same as Creo 6 etc). If you have multiple versions installed this can - and does - lead to simple errors opening the wrong version and occasionally results in files being updated to the new version. A very simple solution - which SolidWorks and other CAD vendors use - is to add the version text to the Icon. So rather than just a simple box with a blue box, have a box with 6 in it, or 5 -you get the idea. Maybe even change the colours as well? Or just change the icons between versions. Anything is better than the current confusion. The problem is illustrated below showing a screenshot from my taskbar - Creo 5, Creo 6, draftsight 2018, SolidWorks 2018, SolidWorks 2019. Those of us that use multiple versions would find this extremely helpful - and it is a very simple change to implement.
In Creo 7 the marking of a selected component changes when you start using multibody. Instead of showing the location in the complete tree, it only shows the feature in the body, tough sketches are not appointed to a body, this means of searching the model tree to find the feature and there the referenced sketch. It could simply be solved by lighting up both the "extrude1" in de body part of the tree as well as the complete chronological part of the tree.
Current Functionality description Windchill Options and Variants supports multi level configurable product, so that configurable module can contain configurable module. Configurable modules at Windchill can be collapsible. This level of functionality is not really implemented at Creo Parametric Options Modeller. In Options Modeller one must stick with onle level of Configurable modules. This will lead to CAD structure, where Configurable Product Variant just lists selected modules (parts, assemblies) in flat manner. For a complex product, this will result additional challange to locate and model products in CAD. Product Idea Enhance Options Modeller to support multi level configurable modules. Current functionality: Please refer to this article CS263701 about support of nested Configurable Products at: https://www.ptc.com/en/support/article/CS263701 & https://www.ptc.com/en/support/article/CS40290 and about “how to create a Configurable Product with Creo Options
Current Creo doesn't have the ability to deform a plastic or rubber part when it is assembled. The use case is for o'rings, rubber parts that are assembled with a different form than it is modeled. A round o'ring can be assembled in a square or rectangular grove.
The Creo Global Interference Tool could use several improvements: Ability to exclude skeleton models (relevant for skeletons models with solid geometry) - suggested default to exclude skeletons. Ability to sort by columns - example: sort by interference volume from largest to smallest Ability to use CTRL and SHIFT to select/highlight multiple lines in the table - currently it's 1 line at a time or 'show all'. Ability to toggle viewing only the interfering volume - currently always have to also highlight Part 1 and Part 2. The screenshot below is from Creo 4 M130.
Windchill customers use more and more an advanced publication technique for their CAD assemblies, especially when the assemblies become large. It’s positioning assemblies. Basically, the worker opens an empty representation of the assembly, list the first level objects, get their position and stores them – it’s super fast. But this mode has some limitations : https://www.ptc.com/en/support/article/CS130991?&language=en&posno=1&q=positioning%20assemblies%20assembly%20cuts&source=search • Process Steps • Flexible Components • Harness Features (identified using the out-of-the-box recipe setting adapter/harnessFeatList= , i.e. empty) • Other Assembly Level Features (identified by using the out-of-the-box recipe setting adapter/assyFeatList=911 915 916, i.e. Hole, Slot and Cut, respectively). Until the latest releases of the publishing adapters, having a mix of Creo Parametric and any 3rd party cad model (using Unite) was also not supported. To ke
The purpose is to switch from the ProE font.ndx/stroked stick font to a modern font. This helps with: WYSIWYG Exporting while maintaining real searchable/editable text...especially for PDFs Creo4 essentially disabled font thickness control (except for entire notes) while the new Bold feature doesn't visibly bold for the stroked font styles. General downstream reuse is impaired by using a stroked font instead of a modern universal font. It should at least have the following features/compatibility: According to the standard, it should be: All caps with exceptions Gothic/Sanserif (without flourishes) Single stroke (all letters are the same thickness everywhere in the letter) To be useable it should also be: Monospaced (spaces and letters take up the same space)...this is essential for readability for text alignment and tables on Engineering drawings) Comprehensively changed and controllable with config options MBD compatible (ideally updateable with dwg config or
Add the ability to flip the direction of a 45 x D chamfer. This would help in controlling how the annotation is displayed (on bottom or side). Discussed in this community post Re: Orientation of chamfer dimension in drawing - PTC Community
When creating BOMs and other tables in drawings you should be able to snap that table (from edge or vertex) to the drawing format. Defining table position by absolute position is a cumbersome workaround which requires memorisation of the measurements of the particular drawing format being used. This will make drawings, cleaner, more presentable and easier to execute.
Need separate columns for locked status and checked-out status in Windchill Workspace. Currently it is part of General Status column where checked-out symbol is shown when that object is checked-out by logged-in user or any other user. But when we use preference setting Automatically lock objects added to workspace set to YES, the status of objects is shown with lock symbol overwriting checked-out symbol if that object is checked-out by some other user and not by logged-in user.We are using Windchill 10.2 M030-CPS08 and we have preference setting for Automatically lock objects added to workspace set to YES.But we are facing issue with objects which are checked-out by some other user but it does not shows the checked-out status if object is locked in workspace. Here it is overwriting check-out symbol by locked symbol. So user are not able to recognize if the object they are using is being modified by someone else or not, hence sometime users are using out dated or non-latest itera
Starting Creo 3 M130 and Creo 4 M020, PTC is not allowing repeat region drawing tables that use cparam within the table or it's relation to have a row fixed. According to them, any previous allowance was just an oversight as cparam is not a decent identifier for their repeat region code. We use cparam to help include bulk items in a bom table. For instance, the unit will says OZ and the QTY will say 9. The cparam is the value of a parameter which is unique within a given assembly. In this case, the bulk item parameter UNIT can be different in each assembly it is in. The table then reads that info.We would like PTC to allow for the usage of cparam and allow the table to be fixed. If anyone has any good ideas how we can work bulk items in the table without cparam, until this is implemented, I am very interested.
Hello Community In the model tree it is possible to indentify family table member by the generic name between smaller+bigger signs. Like "member_name<generic_name.prt>" Now we would like to have similar information about the generic name, if we have the generic itself assembled. in this way we can easily identify, whether a normal part or a generic part is assembled. e.g. "generic_name<generic_name.prt>". Thanks in advanced for your votes!
Because there is no such multithreading mode for the xtop process. This makes Creo Parametric much slower in opening IGES,STEP, ... files the other CAD Software.
Oftentimes it is handy to add a GTOL underneath a note, for example when calling out a hole (e.g. a positioning tolerance). Currently, the interface does not allow a GTOL to be placed underneath a note. https://www.ptc.com/en/support/article?n=CS284792 The GTOL becomes the primary entity, and the note gets shoved onto the elbow. It would be optimal if the note could remain off the elbow, and the GTOL attached below it. Currently, users hack this in one of two ways 1. Create a note and use the @[text@] notation to manually draw the GTOL box 2. Abuse the Additional Text feature on a GTOL frame to add the note above/below it
Current Situation 1. First step after adding a new bore design feature to a part is to define the position of it. 2.a) In the next step you can define the diameter of the in this case not threaded bore and add a chamfer to it. If this sequence is fulfilled the chamfer diameter is chosen automatically to a useful diameter. For example in case of adding a chamfer to a 10 mm diameter blind hole, Creo predefines this chamfer diameter to 12 mm. This works only if the hole has no thread. 2.b) Contrary to this procedure Creo is choosing a completely wrong chamfer diameter if the bore is threaded. For example if you want to create a M5x0.8 thread and then klick on the chamfer button the predefined diameter is 11.20 mm, which is by far too big. Could-be situation Maybe there could be implemented the same functionality for threaded holes as it is well done for non threaded ones. This would save time, especially when there are a lot of different threaded hole diameters in one part,
With active section in a model the boundary lines are displayed in LETTER color and there is not HLR for These boundary lines. So the boundary is always shining through which is disturbing. See also article CS238170 (https://www.ptc.com/en/support/article?n=CS238170).
When creating a hole using the hole tool, have the option to add an exit counterbore. An exit countersink already exist. https://community.ptc.com/t5/Part-Modeling/Hole-feature-Exit-Counterbore/m-p/638690#M33216
At the moment Creo works with inheritance feature in the following way.- Creation of an original model- In a second model this is built in by means of inheritance feature- If changes are made to the first part at a later point in time, the inheritance CE must be selected in the second part and the base model must be called up explicitly with the RMB and the inheritance updated. This costs an enormous amount of time and also causes errors, because the updates from the base model are not done automatically. Especially if several finished parts are derived from the base model (blank). In conjunction with a database, e.g. PDMLink, each released model must then be incremented, checked out, regenerated, checked in and released. My proposal:Introduction of a new config.pro option.UPDATE_INHERITANCE_FEATURESTANDARD --> same working method as beforeON REQUEST --> User is asked once per session when a part-/assembly is called, whether the Verification features should be updatedAUTOM
As of current versions 4 to 7 , you'll notice that parts with defined flexibility , that are locked in the windchill workspace, will not allow you to to vary the dimensions or parameters, these will have a lock icon before them. This is only a temporary hindrance, as assembling the part and doing an edit definition will get you to the varied items menu without a notification. The idea/request is to get away with that first blockage and allow us to fill in the varied items of locked parts upon assembling.
the goal is to - Inherit driving dims with copies of geometry and fusion.- Link intent reference features to manage the semantics of patterns with driving dimensions.- Improve PVZ, STEP AP242 and QIF exports.- Extend the GD&T Advisor use to inheritance dependence parts.- Continue exporting the geometry model with middle Dim boundaries option actually my issue is when I practice a top down design process. I define reference dims in a skeleton. Then I share the geometry in components. - when I create a drawing of that models using copy of geometry, the principal dimensions are missing (must be created) - if I create annotations in the skeleton to share them with the copy of geometry, it's double work. Other thing if I create annotations is the TA. I'm able to use the annotations for Tolerance Analysis, but their dimension boundaries do not control the geometry, so the export for NC cannot be centered in the middle boundaries. And if I use the driv
Hello, In many cases in our database, screws and nuts have threads modeled with the feature "COSMETIC THREAD". When assembling a screw on an existing nut for example, IFX diameter detection features fails and propose the inner solide surface diameter (which is smaller) compared to the real thread diameter located in the Cosmetic feature (see Screenshot) Can you please allow IFX to detect cosmetic features too? Otherwise if designers are not carefull they will have assembly problems (screw diameter too small for nut…) Related PTC Ticket : CS15658810 Related SPR : 11285257 Thanks in advance
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.