Recently active
Goodmorning everyone, do I have to import a step created by a single assembly as a single part? How can I do? If I decide to open it as a "part" the file does not open correctly (missing parts and geometries).Thank you, Matteo.
I have derived a drawing from a Multibody skeleton in Creo Parametric. Now I want to display only one body. This works, but then I have the problem that the view frame is still very large even though I only see one part, and I want to adjust this.How can the drawing frame be reduced?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Schematics 12 2. What is the problem?The Find tool can dig deep into the parameters, but it can't simply do a flat search on a sheet like the Find tool in a Word or PDF document. In the example below, I'd like it to highlight both instances of text on the sheet without needing to know what the parameters are driving them.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It would allow basic searching on sheets without needing to know the parameters the text could be buried in.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Helps find things faster across sheets.
1. Describe the Problem Reference: Ticket - 17405204 Article - CS421194 The New Creo Mapkey UI has some room for improvement: It defaults to showing all of the Admin Mapkeys first. We have hundreds of Admin mapkeys that 'flood' the list and make it hard for the user to manage their personal mapkeys. If a regular user wants to manage their mapkeys, they shouldn't have to scroll all of the way to the bottom or collapse every time they go into the menu. With the old method, where the mapkeys were stored in the config.pro, you were able to see syntax errors with mapkeys. Specifically, if there were lines in a mapkey that didn't end in a semicolon, then all following lines would show as an error in the config menu. Having some indication in the new UI that there are broken mapkey lines would be helpful when developing and debugging mapkeys. 2. Are you using a workaround?Collapsing or scrolling each time I needed to edit a personal mapkey.3. What is the use case for
Creo 10 Pro/Toolkit developement. How to route multiple cables through a network? I tried following code to route all cables through the network point. But all cables are concentrating in one point as the attached picture shown. It is not what I want. for (int j = 0; j < cablenum; j++){err2 = ProCablelocationrefAlloc(PRO_LOC_POINT, sel_array_route, PRO_B_TRUE, NULL, &cablelocationref);err3 = ProCableThruLocationRoute(cable_route_data_arr[j], cablelocationref, &p_location, &second_location);err = ProCablelocationrefFree(cablelocationref);} How to route the cable through the point like the right pic shown? I will be appreciated.
1. Describe the Problem SPR 14980355 introducted a "Select a certificate" popup that prompts users to choose a client certificate to send to the server for authentication. The popup appears every time Creo Parametric is started. In our case, there is only one certificate available, so the popup does not provide any functional use and is purely an annoyance for the user. 2. Are you using a workaround?No.3. What is the use case for your organization?If there is only one client certificate, the popup should be bypassed and the client certifcate should be sent to the server.4. What impact does this problem currently have on your organization?The popup causes a delay in Creo start-up, and is a poor user experience.
Hi all,I have created Sheetmetal tutorials for you. In this tutorials you can learn quickly and easily - How to use Sheetmetal features.Note: if you need to learn something more about Creo features - leave a commnet here Thanks.I will try to prepare some other and new examples for Basic and Advanced Creo modeling.Best Regards,Vladimir PalffyList of Sheetmetal tutorials:How to create Extrude featureHow to create Revolve featureHow to create Flat Wall featureHow to define custom Edge Treatment with Flat featureHow to create Flange Wall feature How to use Bend feature How to create CutsHow to create and use Rip, Corner Relief and Conversion featuresHow to use Extend featureHow to use Join feature How to create Blend feature - Rectangle to Circle How to Convert imported geometry to Flat State
Cone shape. 2" on one side 5" on the other, and about 24" apart. Helical cut with a pitch of 24. Surface or sheetmetal doesnt matter to me. The questions is can I flatten it?
I find I need to change the width of the model tree from time to time. After changing the width, Creo 's behavior is to regenerate the model and can take some time when I have a large model. It seem as though this is not necessary. Can this behavior be turned off?
Hello friend,I am facing an issue during study check in Creo Ansys simulation. I see this is because of elastoplastic material selected. later on, when I select linear Material, this is working fine, means no error showing. I am selecting elastoplastic (nonlinear material) because my part is of plastic Material. Now, my question is Does this Creo Ansys simulation support nonlinear material? If yes, please help me how to resolve this issue.
This topic is related to this one but the moderator advised me to open a new topic so here it is. I know there are several examples (like the one in the linked topic above) and had one working in the past but we updated to Creo 11 and now this "open drawing with the name of the open part or asm" mapkey doesn't work anymore and can't get it to work. I'm aware of the case that the mapkeys are not embedded anymore in the config.pro. I have some mapkeys that are working or are working again so how the new mapkeys work I know.. So who has a working mapkey or can help me with this?
I am trying to set up a CFD analysis where a fan is blowing air through a radiator. I don't know the exact geometry of either the fan or the radiator but I know the general size and I have charts to tell me how much pressure drop to expect on the radiator and pressure gain from the fan. Can anyone help to tell me how to set that up in Live Simulation? See the attached picture as a reference. I have tried to enter a positive pressure on the outlet side of the fan and then measuring (with a probe) the pressure on the surface of the radiator in front of it. Then I take that measured pressure value on the incoming side of the radiator and enter it as inlet pressure. Since in know the pressure drop from the chart, I enter a lesser value on the outlet side mimicking a pressure drop. Am I on the right track or is there a better way to set that up?Thanks!Creo 12
Was geht mit dem Creo Lizenz Server ab, kann mein Creo nicht mehr starten?
I'm putting a captive screw with compression spring in one of my assemblies. The coil spring doesn't have any 'cylindrical' features or surfaces. I made a central axis, but when I try to constrain the Spring Axis to the bolt cylinder surface, it places the axis coincident/tangent to the surface, not concentric. I always have the option to constrain Front & Right planes, but I would like to figure out how to get concentric mates with an axis.
1. Describe the Problemwhen creating hole, using "from feature" option on point which created on "non parallel" surfaces the hole keeps original orientation which leads to wrong result ( from user perspective ). the user expect the hole to be perpendicular to each of the surfaces 2. Are you using a workaround?in some cases, limited, using the option copy->paste ( advance ) solve the issue. in most case it isn't3. What is the use case for your organization?general design activity4. What impact does this problem currently have on your organization?loss of productivity
Hello all, since there is no direct way of creating negative volume of a part (at least as far as I know-being relative rookie) I wonder if there is any, still relatively quick, way of doing that in Creo 10. With that I have in mind Ansys Space Claim 3D modeller where it is possible to close the model with planes and create volume inside of complex geometry and these defined planes. I would want a volume of water that fills inside of a turbine rotor. Thank you for your comments, suggestions...Best regards!
1. Describe the Problem There is no way to define tags on the client side (e.g. in the Diagnostic Tools or using an environment variable), which are saved with the Creo session data and sent to the Creo Performance Advisor in order to be able to filter for session data with certain tags. 2. Are you using a workaround?There is no acceptable workaround.3. What is the use case for your organization?The company I work for has several locations where Creo is used, but the license server is centralized in one location for all of them. So the Creo Performance Advisor data all converges under the site that manages the licenses. In the Performance Advisor dashboard, however, it is no longer possible to filter for the data of a specific location, so that admins only see the data relevant to them.4. What impact does this problem currently have on your organization?Since relevant data, such as frequent crashes or outdated Creo versions, is lost in the mass, the admin of a location can't recognize
I referred to some answers.manually created 3D annotation place flat to screen using Creo's note function;CS153536 - Leader line is not showing for flat to screen annotation feature in Creo ParametricNew to Creo need help with text - PTC Communitythe annotation is placed flush with the screen in the model viewer and its position rotates around the model.How can I achieve the same effect generically via the Toolkit API?
1. Describe the ProblemWhen a user creates a copy of a 3D file and forgets to include the linked drawing in that step, there is no automatic way to link a later created copy of the drawing to the previously created 3D file.2. Are you using a workaround?User would need to create a new copy of the 3D and either re-do all the work, copy all the work, or reference the previously created part.3. What is the use case for your organization?Simplification and don't punish users for missing to copy a further object early on.4. What impact does this problem currently have on your organization?If the drawing was missed in the save-as command, users have to spend at least 30 minutes in order to correct that small mistake. Feature request would be to offer an option, as it is available in assemblies, to replace the model in the drawing with: - Family Table (this exists today in the Replace Model command) - Reference Model - Existing copy - Assembly containing the model - Unrelated component Replace
1. Describe the ProblemAccording to https://www.ptc.com/en/support/article/CS276894, ProToolkit does not have any direct way to modify the 3D graphics background color. I confirmed with a tech support representative that this is still the case.2. Are you using a workaround?No. We discussed possible workarounds and none of them were feasible for us.3. What is the use case for your organization?We wish to take snapshots of the model in various configurations for our reports, and would like the background color to be configurable for when we take said snapshots. We are using ProRasterFileWrite, so either modifying the background of the display area itself, or modifying ProRasterFileWriter so a background color can be specified would work.4. What impact does this problem currently have on your organization?Model snapshots in our reports will not be visually consistent.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the a
1. Describe the Problem When Creo Parametric is connected to a Windchill session, the 3D model tree automatically gets the super helpful Windchill status column. This helps users understand statuses like Checked Out, Out of Date, etc without having to constantly check the Workspace. Unfortunately, there's no similar functionality for 2D drawings. Please add the same ability for 2D drawings so users can quickly know if the drawing is Checked Out, Out of Date, etc. without having to track it down in the workspace. It would also be helpful to have the Windchill actions (Check out, Update, Lock File, etc.) available via right click in the drawing model tree. 2. Are you using a workaround?User has to manually check their workspace for this information which can take 30 seconds or more if there's a lot of objects in the workspace. User's often forget to check. We've added a custom Windchill tab to help with the lack of Windchill quick actions. We added the following buttons: Check O
I am using Creo Parametric Release 5.0 and Datecode5.0.0.0在一个零件中,如何将一条曲线的局部线段进行复制,并使生成一个复制曲线的端点与两个坐标点重合
if i have a simplified representation from an assembly, it should be possible, to export this presentation in step format, only simplified. Espacially if there is a subassembly, with an excluded part and an material cut in the subassembly, and the same subassembly with that included part the export of this presentation excludes all parts. In that case the Export will be incorrect! Only if i exclude the first subassembly, the export will be correct. see STEP_SUB.zip
According to the PTC documentation, this is supported. I am not able to get this to work in Creo 7, 9 , or 10. Is anyone able to confirm that loading a light file works for them? It is possible my light files are corrupted in some way, if someone has a sample light file they can post here, I will try it. I have included one of my .lgh files for reference.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo Schematics 122. What is the problem?When adding new shapes to a library component, the Sheet Parameters and Shape Properties editing options are found in two different windows. This means that I when dealing with several shapes, I have to open each the Sheet Parameters window, make changes, close the window, then go through the whole process again with the Shape Properties.This is extremely time consuming when dealing with multiple library components that are comprised of multiple shapes.3. Are you using a workaround? If yes, please describe it.There is no workaround to my knowledge.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Rather than offering two options (Sheet Parameters and Shape Properties), I propose offering a single option (Properties). This could
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.