Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Currently using Creo 8.0 and in the process of upgrading to Creo 10.We would like to be able to add easily accessories to the Manikin, such as Backpacks, Parachutes, Helmets , Military gear and equipment, change clothing (Boots and Uniform), Protective Goggles and spectacles, Hand held tools and machinery etc.This ability will be used to analyze the required space , collision detection within the design and if possible , ergonomic analysis of the design. 2. What is the problem?Currently ,designers lack the ability to easily judge the space and ergonomics required when modeling designs which require humans to wear different clothing and equipment while operating within that design space.3. Are you using a workaround? If yes, please describe it.4. What is the use case for your organization? Describe how your idea would work in context or how it woul
Now only aluminum,copper,electric,glass,iron,plastic,steel,titanium and zinc are available, which is not enough for design. This library has not been updated for about twenty years.
In Drafting, when you change the properties of a hatch, you can select 3 standards: Iron Steel Copper The macros are configurable, but the list seems to be hardcoded according to PTC support. I would like a functionality to register a new Standard Hatch pattern through customization.
最近、と思いますがリビジョンチェックで図面をロードする際「’TopY’という名前のパーツが一つ以上あります」というアラートが出ます。「OK」をして進み、<比較>を実行すると「***ロードファイルで図面がロードされていません」と表示され比較されません。対策はありますか? Windows11 25H2Me10はV19.0なのでサポートはされておりません
Are any users familiar with using G43.4 to program 4 axis Horizontal Milling Centers utilizing simultaneous 4 axis motion? If so, can you explain the basics of how you got it to work for you? Thank you,Matt
When volume geometry is hidden by layer (only layer surface copy is shown) and i need to add a feature to the part i need to go to layer tree and switch the layer to visible, back to model tree for changing, back to layer, then set back to invisible. then back to model tree. ->This is around 20 clicks! 1. suggestion: add the mini toolbar to layer tree, too. 2. suggestion: add the layer tree underneath the model tree, like already done in drawing mode.
ISO 5459:2011 - Placement of a datum feature indicator as an extension of an angular dimension line. This enables the designer to use the median line of a cone as a datum line and the median (bisector) plane of a wedge as a datum plane. Wedges and cones are very common features in plastic parts, metal cast parts and stamped parts. Cylinders become cones when drafted, likewise blocks become wedges. Designers are seriously handicapped if these features cannot be used in datum systems. See ISO 5459:11 Example C.1.5.
Les zones text supplémentaires des tolérances géométrique ne supportent pas l'utilisation des symboles (&p99). Elles affichent le texte brute : &P99 sera affiché en &P99 en non le nombre d'instance d'une repetition.
Currently, accomplishing this would require faking it in.
In Creo Parametric, to design a cylinder 2 options are avaible:Extrude a circleRevolve a rectangleIn first case, diameter dimension is obtained in sketch by double clicks on the circle (a simple click gives radius dimension)In second case, diameter dimension is obtained in sketch by 3 clicks (line-axis-line)For this 2 cases, in associated drawing this 2 kinds of dimensions can be showed on any view we want (front, top, right,…)Using MBD, #Annotation Feature #Create a driven dimension the behavior should be similarMBD current behaviorif dimension is created in top view, in drawing dimension can’t be move to front viewIf dimension is created in front view, Ø symbol is not added in prefix dimension, and in drawing dimension can’t be move to top view (or other view)
In Creo PTC introduced a hidden fonctionnality called Hatch Editor with allow you to manage Hatch.Unfortunatly these feature is only available in 3D mode and not in 2D mode.Add these feature in Drawing Mode should be more logical.
As reported in post LINK , I would like to make an improvement for driven dimensions created as diameter (annotation menu).I would like the driven dimensions created as diameter to be able to be reoriented with the same behavior as a diameter created from a sketch, that's to say. it can be reoriented from the FRONT annotation plane to the TOP plane for example. More precisely on a plane parallel to the axis of revolution.See exemple below : reorientation of the two types of dimensions : This methodology is useful when it is not possible to reuse the diameter dimension of the sketch. Printscreen made with creo 7.0.5.0
I am using creo parametric 10.0.2.0I have a schedule in my drawing that is using a 2-D repeat region to call out my family table and insert a table with the following: | fam.inst.param.name | | | |fam.inst.name | fam.inst.param.value | | | |
I am using Creo Parametric Release 10.0 and Datecode10.0.7.0Hello,i want to know if it's possible to add texte in a annotation from a part in a assembly drawing without modifie the annotation of the part.For exemple i import a annotation like Ø10 frome a part in my drawing assembly and i want to add ( ) around the annotation for see (Ø10) in my drawing.thank you for your support.Kévin Goasdoué
Hello guys, I would like to know if it's possible to apply a filter to a specific parameter within a table, as in the following example:I have a family table of bolts that includes various diameters and dimensions. My goal is to automate the generation of the 2D drawing using the rpt region feature, as follows:The table displayed in the drawing should include only the dimensions related to a specific bolt type, filtered by diameter — the dimension is a consequence of that filter.Other diameters should not appear in the table; they must be excluded. My version: PTC CREO 10
Workflow for creating a 2D repeat region to display family table information. Covers an alternate method using simple repeat regions to allow the use of relations and filters. Discusses creation of filters in alternate method, and some related drawing setup options are also covered in addition to column sorting to match the family table display order.
I am using Creo Parametric Release 11.0 and Datecode11.0.0.0Receiving fatal error encountered. A traceback log has been written to C:\Users|Public\Documents\traceback.log error when trying to open a file in Creo Parametric 11. We have tried old drivers, new drivers, dx 11, dx 9, opengl. When it works it has a black screen. If it loads a grey screen, we know it will fail.Here are the errors that I facedReceiving fatal error encountered. A traceback log has been written to C:\Users|Public\Documents\traceback.log
Hello,while working in Creo 11 and trying to display the sheet metal development using a Simplified Representation of the Flat Pattern, I am experiencing an issue related to Annotate tables that are set to Flat to Screen alignment.When I create the Simplified Representation for the flat pattern and have an Annotate table added to the Combined View (aligned as Flat to Screen), the table alignment becomes incorrect after the flat pattern is generated. Specifically:When I resize the Model Tree panel, the table does not adjust or move along with the change in the Model Tree width.– See image 1.When exporting the model as PVZ and opening it in Creo View Express 12, the table shifts both horizontally and vertically in the Combined View.– See image 2.I would like to know whether this is a known issue, or if there is any setting or workaround available to prevent this misalignment. Thank you in advance for any help or suggestions.
Hi All, I'm working with PTC Creo 8.0.12.0, with a 49" Samsung wide screen monitor and a NVidia RTX4000 graphics card. Allthough I'm very satisfied with the new wide screen I've got one issue I can't figure out. I would like to use Creo at the right half of the screen, while using the left side for documents, email etc.However every time I open a new window it's new position is on the left side with the size of about 90% of the whole screen. So every time I'm opening a new window I have to drag and resize it, which is very annoying.Is there any way I can get Creo to open new windows at the same size and position as the main window? Thanks in advance!
In Creo Simulate you can display the World Coordinate System (WCS) in the lower right corner by using the config.pro option sim_display_current_csys_triad=YES This helpful information must be available in ALL modules of Creo Parametric !!!! Vote for it !!! 😉 BR - Urs Simmler
Hello i am struggling to add the new dim Parameter in another instance in the family table. Apparently, it doesnt like parameter names. i thought i could rename the original dim (A, B,..so on), add an offset, create new dim as a parameter, error "you have entered an invalid text string or a numeric value" apparently, it needs to be a number. what will be another workaround? Ultimately, i want use these new parameter (A1, B1, C1, D_1, E1, F1. G1, H1) in a drawing table. It seems that i have to convert the string into a number?
Hello, is there any procedure to export a file from 3D model .asm or .prt to a .html file that can show the 3D model in a web-ready browser? Thank you, Michele Barile
1. Describe the Problem I work with some old creo models and when editing features the old menu manager appears which is clumsy to use… I understand why this is the case and is why creo can still load old parts. I propose a right click option to upgrade a feature to current creo version so the new UI appears instead. I understand the model may change, and a warning should be given prior to upgrade. I would expect to be able to repair and edit the feature appropriately. 2. Are you using a workaround?No. I have to recreate feature from scratch. 3. What is the use case for your organization?It’s difficult if not impossible to work on old models with such bad UX as the old context window and menu manager. 4. What impact does this problem currently have on your organization?Huge. Hard to work with old models.
1. Describe the ProblemThe view name and scale of the detailed drawing can only be erased and restored simultaneously, and the scale value cannot independently control the display status.The display style of the detailed view can only be controlled through the fixed options in the dtl and cannot add user-defined display styles. 2. Are you using a workaround?Currently, it is achieved by adjusting the text size of the scale value, but this can only be a temporary solution. I think it is necessary to make the view name and the scale value into two independent bound objects. Users can operate them separately with the mouse to show or hide them to achieve this, or add more functions to the view name wipe function of the view name to achieve this.3. What is the use case for your organization?Here are my two suggestions for enhancing the detailed view: 1. A detail option is required to control how scale values are shown or hidden independently in detail view. 2. Custom value styles need to
Hi, I am after some advice please. I am fairly new to using creo (have used solidworks, inventor and rhino in a previous role), I am trying to remove a template from the list on creating a new drawing. I have navigated to the folder where the templates are saved and this particular template isnt in there to remove, yet it is showing in the list as a n option. Any idea where it would be or why it is still showing?Thank you!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.