Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Schematics 102. What is the problem?i would like to have a new function or parameter that adds all the connection_counts at the port level so when we look at this connector that numerical value is added up and available to be seen. in this example the parameter total_connection_count would be set to 483. Are you using a workaround? If yes, please describe it.manually counting the missing wires4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.time when calculating the number of plugs needed in a BOM structure or assembly5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) time savings
Is there a way to write the spiral curve equation in a cylindrical coordinate system in such a way that the pitch is zero in the beginning and the end so that the curve starts and ends tangent to the start and endplanes that are normal to the trajectory center axis?
hihow to change unit to g/cm3
I am using Creo Parametric Release 6.0 and Datecode6.0.6.0 1. When you click Save on 3D and 2D models, you can automatically execute the program of custom mapping keys;2. Is it possible to add some verification when saving? If the verification fails, it cannot be saved;3. Is it possible to customize and adjust the options under the "File" tab;Contact: Zhu Yunbo Teil: 15895986870, Email: 15895986870@163.comHere are the errors that I faced1. When you click Save on 3D and 2D models, you can automatically execute the program of custom mapping keys;2. Is it possible to add some verification when saving? If the verification fails, it cannot be saved;3. Is it possible to customize and adjust the options under the "File" tab;Contact: Zhu Yunbo Teil: 15895986870, Email: 15895986870@163.com----------------------------------------------------------------Translated text from Simplified Chinese to English using google translateSubject: 校验保存功能Body: 1、能够在3D和2D模型点击保存时,自动执行自定义映射键的程序; 2、
Hello, i am using creo 10 and when i try to regenerate and then save the drawing, the window says not responding.see attached error page. Br,sandeep c.
Hi Guys,I have one main assembly that has one drawing and also I include my sub-assembly and component drawing based on sheets. Can we convert it into individual drawings based on the 3D model name? Regards,Aj
there is no documentation on this. i would like to see a number at the connector level adding up all the connection_count in the port level.
1. Describe the ProblemThe creation of trail files cannot be disabled. See https://www.ptc.com/en/support/article/CS35307 Is it possible to disable the creation of trail files in Creo Parametric 2. Are you using a workaround?Yes, as described in CS353073. What is the use case for your organization?We have different computer configurations for various reasons: - Win 10 and Win 11 installation (transition on-going) - One or more local drives (C:\, D:\) - Different user groups: From designers working predominantly working in Creo Parametric to seldom user.4. What impact does this problem currently have on your organization?The trail file location historically was on the D:\ drive, which no longer is available on all installations. We rarely use the content of the trail files. Hence instead of deleting the fails using purge (or other methods) it would be useful to disable the creation of trail files at all by providing a config.pro option.
I am using Creo Parametric Release 8.0 and Datecode8.0.0.0Creo user is experiencing long delays opening up Creo files. Sometimes longer than 3-4 minutes. Mainly solid models. Sheetmetal models appear to be better.
1. Describe the ProblemWhen creating a solid part of a pipeline, there is no default part template selected. This often results in the template not being selected and the required attributes to be missing off the part that are required for our Windchill PLM system, along with strange mass properties behaviour, no default views, planes, etc. 2. Are you using a workaround?Ensure to always select a template. Use modelcheck to ensure a template has been used.3. What is the use case for your organization?I would suggest that a configuration option in config.pro along the lines of template_pipingpart to be available, or for the system to use the default solid part template as a default.4. What impact does this problem currently have on your organization?Almost every time a pipe is produced (we design maybe 10-20 per month) the part template is missing, and so the part must be recreated, along with any drawings etc.
Utilizing the same configuration files and settings: If I start Creo without the trail file being automatically run and run it manually it works perfectly. Server Management - Without Trail File Ran Automatically If I start Creo with the same trail file being run automatically the saved server is no longer shown. The trail file seems to run correctly as the second blank tab is opened successfully. Server Management - With Trail File Ran Automatically Not sure what is causing this. Trail file is very simple as it just opens a second blank tab currently.~ Activate `main_dlg_cur` `EMBED_BROWSER_SMARTAB_LAYOUT_buttons_lay_ph.pshNewPage_inside` 1~ Activate `main_dlg_cur` `EMBED_BROWSER_SMARTAB_LAYOUT_buttons_lay_ph.page_0` 1~ Trail `UI Desktop` `UI Desktop` `SmartTabs` \`selectButton main_dlg_cur@EMBED_BROWSER_SMARTAB_LAYOUT_buttons_lay page_0 0` The shortcut target is set to the following:"C:\<INSTALL_PATH>\Parametric\bin\parametric.exe" "C:\
Existe algum documento que descreva o que é perdido ao mudar do Creo Parametric para o Siemens NX? Um cliente de 20 anos deseja mudar, e precisamos de argumentos para neutralizar essa mudança. Alguém poderia me ajudar com um documento oficial da PTC ou algum comentário que possa ser usado em defesa?
A functionality that would make Cabling excel would be to enable support for Devices with Pre-Assembled "Pigtail" wires/cables and Pre-fabricated cables without the need to generate new instances every time they are added to a new assembly. Take for instance a Sensor or Surge Protection device that is sold with 18" conductor leads. Instead of modeling the wires in Creo Parametric, I would like to define the pre-assembled wires as Entry csys where I can predefine all of the parameters including the addition of "MAX_LEN" Then when added to a Cabling Assembly, it should become its own harness and if when routed the length is longer than "MAX_LEN" then route would fail do to this. In this way, there is no need to create a family table and new instance for each application. Same would go for Pre-Fabricated cable assemblies. The connectors on each end should be dynamic so that one could assembly each independently and the Cabling application could levera
Issue is that with each Creo+ update, the "Start in" setting is reset to the default.
Hello, We recently changed the network in our organisation. The server holding licences for creo didn't change, it just change network. Although the server is up and we can ping it, people can't access their licenses. Here is the creo error message and the result of ptcstatus.bat on the user side.And here is the result of ptcstatus.bat on the server side :
I have a stencil that I'm adding to an assembly just to show it graphically and I want the weight of the part to be zero. Is there a way to assign a weight to a part that has the mass parameter locked?
Hello Can someone please let me know if I can download Expert Moldbase Extension 16 now? PTC only has version 15 available for download. Thanks. Translated by the Community Moderation using Google Translate. Olá Alguém por favor pode me avisar se eu já posso baixar o Expert Moldbase Extension 16? PTC só tem a versão 15 disponível para download. Obrigado.
When an IDF or IDX is used with Collaboration from the ECAD team, and NO mapping file is setup; creo defaults to looking for a PART with the same name in the IDF or IDX; not an Assembly. The issue is that, if an Assembly does exist, there is a high probability that the part is inside the assembly with added information in the assembly as well. By pulling the part in, you loose all of the information in the assembly.
In our company, creating raw materials lists for projects (like product A) is a time-consuming manual process. Our estimator has to go through every single part in a CAD model from Creo to figure out how much sheet metal, bars, and pipes we'll need. This is especially tedious for our low-volume, high-mix production. Is there a better way?Ideally, we did like to extract raw material dimensions (highlighted in red in the table below) directly from the Creo 3D model parameters. This seems like a common need for manufacturers – how are you all handling material estimation with Creo and Windchill? Looking to automate this process and free up our estimator's time for more valuable tasks. So far I have tried to fix Height/Diameter/Thickness column through Material Library(mtl file). Any insights or tips would be greatly appreciated!
1. Describe the Problem Reference: Article - 419866 Ticket - 17339489 A flat feature is not able to be bent a full 180. As the bend value grows larger and larger to 180, the flat distance stops referencing the reference edge of the part. Rather, it starts to reference a point in space and then stops working altogether when it gets close to 180. A flange has no issues bending to 180. See video:(function() { var wrapper = document.getElementById('lia-vid-6354757664112w962h540r176'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos) 2. Are you using a workaround?The engineering design team struggled to get the geometry they w
1. Describe the Problem Please reference: Article: 360568 Ticket: 16206056 SPR: 13491483 We created geometry points on a sketch such that we can help route a ribbon cable thru those points within the cabling module. When trying to add location, and specify those points, the ribbon becomes twisted. According to R&D, this is per design as the path of the ribbon will be parallel to the sketching plane that the point was created on. Where-as, if it was a regular datum point, it simply goes thru the point, like you would expect. If we were sketching, we would need to do it on a plane that is perpendicular to the direction we want the ribbon to travel. This is not ideal for many reasons, including: I don't believe this concept of a direction being dictated by the reference plane of an object was ever used before. Up until we had PTC write this article, it was unknown. A typical user would not think this is how it should behave, based on how the tool be
1. Describe the Problem When creating broken views, depending on the size/scale of the view and the geometry involved, selecting the Heartbeat or S-Curve Options for the Break Line Style often results in a comically oversized break line that is unusable. The workaround is to sketch a spline in the size and shape you want, but they never look as nice as the pre-defined geometry. If a couple of anchor points could be added to the break lines that would allow you to scale the height and width of the break lines, it would be much cleaner and easier to use these break line styles. For example on the heartbeat style, an anchor point at the point of the heartbeat could be used to grab and drag to scale the height/amplitude of the heartbeat and another at the end could be used to grab and drag to adjust the scaling of the width/wavelength of the heartbeat. Perhaps a 3rd could be added to allow you to drag its location and snap to various geometry poin
1. Describe the ProblemLeroy, Isofont and Cal_Alfs font height does not control the overall character height. The height goes to a midpoint in the height. This makes no sense. There should at least be a reference height provided. PTC Tech Support says it works to spec. I can't imagine a use for this and tech support can't explain a use for it either.2. Are you using a workaround?I tend to use fonts that display the full height of the character such as norm_fonts. I prefer the look of leroy or isofont, but it is too difficult to get a 1/4" character height on those fonts.3. What is the use case for your organization?Add a reference dimension to the overall height of the characters. The dimension to somewhere in the middle makes no sense.4. What impact does this problem currently have on your organization?Each time I have to engrave a part in manufacturing that leroy, isofont or cal_alfs needs to be used, I need to go the extra step of drawing lines in place
1. Describe the ProblemProvide a way for users to be assigned technicians that speak a similar dialect of the language they speak. Each time I connect with a technician from tech support, I talk with people who have thick African or Indian accents and being from the Midwestern U.S., it makes it almost impossible to get past the language barrier.2. Are you using a workaround?None3. What is the use case for your organization?When I contact Vericut's CG Tech Tech Support I contact their US Support team. They are a global country and when I need help, I am always talking to someone that speaks clear US english. There may be some Southern accent, or some East Coast, but it is always easy to understand. That is where PTC needs to be.4. What impact does this problem currently have on your organization?It affects me and my decision to even bother calling tech support.
1. Describe the ProblemFrom datum points, I need the ability to create best fit: Line, Circle, Arc, Cylinder, Plane. You should be able to select graphically, or by pointset features, and create a line, arc, circle, cylinder, and plane. It should also state the average and max deviation. The software has been lacking this simple ability that many other CAD packages have."2. Are you using a workaround?Not in CREO. I open NX CAD software and to it. Would be a great reference on how easy it should be.3. What is the use case for your organization?This would work when I have multiple points or objects that I need to know the best fit plane of. Or CMM data analysis.4. What impact does this problem currently have on your organization?I frequently go back and forth between CAD software just for this function. This functionality has been missing and if a frequent source of frustration for us.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.