Recently active
This appears to have been implemented in Creo 3.0 M080. I can now open multiple .rwd files by clicking on New Template. I've remarked this post with a better response.
You can get 4K with the Dell 7710, but not with the Sager.
I run a lot of FEA, that's why I want the Xeon processors.
Let me restate that...a great idea...need PTC to implement it regardless of the number of votes.
If you insist on having a 3D solid model, consider redesigning the joints where they all have smooth transitions with rounds. In reality, these joints will probably be welded. With a 3D model, you will also generate a lot of elements, especially for thin walled tubing. If you're wanting to analyze the stresses in the tubes, I would still consider using the Beam Tool. It's much easier and will run quickly in FEA.
Just to confirm your post, here is a screenshot of the available processors and prices for the Dell 7710 from the Dell web site (5 selections):
Yes...I saw where you mentioned that you haven't obtained one yet...that's why I was asking. The PCs that you have played with are built for games. I was wondering how well Creo 3.0 will perform on them. I almost pushed the button to order my Dell 7710, and I read this post. So that's why I was asking about the Sager. So I went to their web site for additional information, and I didn't see where you can configure a laptop workstation with Xeon processors, but maybe I need to got back and look again. So...can you get a Sager laptop workstation with Xeon processors? Thanks for the reply.
Also, have the option to change the color of the glass.
Or maybe there can be an option to control the number of glass planes. For example, as you create datum planes, let there be a check box to allow for glass or wireframe, etc.
Maybe there can be a config option to set just the default planes as glass and the other planes as wireframe, etc. Just brainstorming. I wrote the datum plane names on the plane for fun, as I didn't see any tool to create the text that I really wanted on the plane. Actually, these aren't planes in Creo, they are surfaces just to project the idea.
A great idea...need more votes.
Something like this...
Hi Bernie,Have you actually used the NP9755 or NP9775 on a daily basis?
I used one license in my post, and I don't have that problem.
Andrew,Sometimes I get the same problem, even after the software was installed properly and running for several weeks. When I restart the PC, it corrects the problem.
Teofil,Have you considered building your frame with the Beam Tool in Simulate? Since the chassis is made up of tubes, this can be done easily. The problem I see with your model is that it's not modeled for FEA, and I can see why you can't get it to mesh. If I was going to analyze this, I would make points and curves and use the Beam Tool.
Leonardo,I tried to replicate the same type of problem, but I couldn't. Perhaps I'm not understanding your problem. I have two Creo Parametric windows, and when I activate one or the other, my model tree does not scroll to the top. I'm using Creo Parametric 3.0 M070. Can you upload a screenshot of your problem?
You modeled a chassis in Creo Parametric using the Framework extension and you attempted to mesh it in Autodesk Simulation (formerly ALGOR), and I assume you tried to mesh it with h-elements. If you have Creo Simulate integrated with Creo Parametric, I would attempt to mesh it first in Simulate. You also have Creo Simulate Lite, as it comes standard with every Creo Paramteric. The automesher in Creo is AutoGEM, which is geometric mapping of the elements using p-elements. Your error code states that you don't have a watertight solid, so it sounds like you have some surfaces in your model. Surfaces in Creo have a lavender color by default. If you can upload the model, I'll be more than happy to examine the geometry, providing it's not a Student Version of Creo. If it is, try uploading some screen shots.
Please see the below image on how to create an angled datum plane. This was created in Creo 3, and it is the same for Creo 2.
Flatten the model and use the Measure tool.
Once you add a surface region to a part, you don't have to keep adding it, because it's stored in the input file.
I haven't experienced that since Creo 1.0. I'm currently using Creo 3.0 M070, and I can't recall ever seeing that happen.
Creo 3.0 on my PC has never crashed in a given week.
Mark,When you place your IGES lines in Sketcher, use the Project function and select all the lines until your sketch highlights in gold. The Reference access is in the upper left hand corner, as shown below.
Orthotropic material - Wikipedia, the free encyclopediaTransverse isotropy - Wikipedia, the free encyclopedia
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.