Recently active
Kong,First, do you have an error free mesh? You can mesh the model without running it. What does it look like?
You think that, but they didn't think that. There needs to be an option to turn it off.
When dealing with large assemblies, it is best to work and mesh with the individual parts first. After you know that all of your parts will mesh, start adding to your assembly, then mesh, add another part, then mesh. So when you get the entire assembly together, you will have eliminated all of the meshing problems. Without the assembly or screenshots, it's difficult to diagnose. So start of small and work your way up to a larger assembly.
I'm not sure if this is what you're suggesting, because I posted a tritangent fillet, and your idea is a tritangent 3D blend, unless you're using the word "blend" as to blend/connect other surfaces to create a fillet.
These questions are specifically directed to the PTC Community Help and the managerial oversight for Product Ideas.1. How many votes does it take to get a Product Idea considered for future developement?2. How many votes does it take to get a Product Idea implemented into the software?
Document number is CS221532.SPR is 4884837.
Try to mesh only the geometry and suppress everything else in the model tree except material properties.
You cannot turn the xyz values off in Creo 3. There is a SPR on this topic, and soon as tech support sends it to me, I will post it.
This is an example of a 3d tritangent fillet, a fairly new feature in CATIA. If this is what the product idea is meant to be, then here it is. If it's not, then maybe Giovanni will post us an image.
After taking another look at the rod, it's mostly comprised of surfaces. I checked this by "removing all appearances", so everything that is lavender is a surface (shown below), and this certainly explains why it didn't import as a solid. I don't know what kind of translators Autodesk uses to take surfaces and automatically fill in the voids to make a solid.
Try importing into Creo again and highlight the problem area and post a screenshot of it.
Staale,I imported all of the STEP files with no complications. I've posted an image of one of them below.
Puneeth,Please look at the below image. If you want to locate overlapping geometry, select the icon that is boxed in red, and the overlapping geometry will turn red in sketcher mode. Notice the red line in sketcher. Just deleted this and recreate the required geometry.Please read about "Model Accuracy" in the help center, as shown below.
Puneeth,I corrected the model in Creo 3 and uploaded. It wasn't enough to remove the overlapping geometry, as I also had to change the accuracy, because it would not extrude. The attached model is in IPS units and the accuracy was changed to 0.0001.
Sander,It would be nice if we could see the entire part. The bottom is hidden, even though it's supposed to be "square".
Puneeth,If you extruded as a surface, it's possible you had the surface icon selected. There are two icons boxed in red below. If you select the one on the right, you will get a surface. If you select the one on the left, you will get a solid.
I think that would be a correct assumption. Creo Simulate does not have functionality for counter-sink fasteners, and that's why I submitted a Product Idea to add it. SolidWorks has it, so the image in the attached link is a screenshot from SolidWorks.https://www.ptcusercommunity.com/ideas/3783
Givovanni,Don't forget to vote for yourself.
Without viewing your model and fastener results, it's a little difficult to determine why you are have compressive loading in a fastener, which is not uncommon. But it sounds like you think the axial load for tension should dominate.
I have attached a briefing on bolted connections that you might find interesting. This gives a lot of background on how the fasteners work.
The answer to your second question is no, it doesn't matter which reference you select first as far as results go. But it does matter in the orientation of your fastener head and nut.
Jacob,The C,D, and E columns are the x, y, and z locations of the evaluated measures in the subsequent columns.
So there is nothing under the "ground"?
David,Can you provide a cross-sectional sketch of all the components involved? I have not been able to picture everything in my mind, because you have mentioned, basement, floor, ground, S235, and gearbox. Thanks.
Is the S235 the basement material? Or does the S235 sit on top of the basement floor?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.