Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Add capability to open parent models directly from a CAD model or the workspaceAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?  Creo 7.0.5.0 connected to Windchill 12.12. What is the problem?  When making changes to a model (.prt or .asm) Creo users do not always know what parent models to open and validate when making changes.  This leads to unintended changes to parent designs and rework required to fix the changes.  Many times the changes don't mess up the designs, but do cause regeneration issues due to failed constraints in the parent models.Creo user is tasked with making a change to a component and adds it to the workspace. Creo user makes the change and checks in the model.  Unknown to them the change made negatively impacts another assembly. (diameter size is incorrect)3. Are you using a workaround? If yes, please describe it.  There is a partial workaround that requires knowledge of Windchill and Multiple steps, but Creo users are not always familiar with Windchill except for the 'Add to Workspace' and 'Check In' process. User has to navigate to the Windchill information page of the model they are working on.User has to make sure they are looking at the Worksapce view of the model.User can then select all the first level parent models and use 'Add to Worksapce'However, even if the Creo users are able to add the parent models to the Workspace, two issues remain. It is not clear which of the objects added are the parent level assemblies.  There are now 783 objects in the  workspace... which 3 need to be opened?This Part is used as a merge model in 1 part, that Part was not added to the workspace.  Users must remember to look at Referenced By, navigate to each Merge Model reference and add them to the workspace manually.  (changing collector settings does not solve this issue)4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.  Creo users need the ability to quickly access impact of design changes on all models which use it as a dependent. When a Creo user is in a workspace, my idea would allow them to select a CAD model, then run an action which provides the list of models dependent on the selected model.  The action would present the user a table with all models dependent on it and allow them to select specific models to open in Creo.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)  This impacts our entire organization and the potential to impact the integrity of every model.  The number of assemblies that have failures and the rework hours in development is not easily measurable but impacts a lot of work hours every day throughout the org.

I want to edit the tooltipAcknowledged

  1. What version of software are you running?Creo 10.0.0.0 2. What is the problem?Messages that appear when hovering over surfaces such as models cannot be edited/changed using Toolkit.The message you want to edit/change is circled in red in the attachment. 3. Are you using a workaround? If yes, please explain.A workaround is to use ProSelect() to select the surface and ProMessageDisplay() to display the message in the message area. 4. What is the use case for your organization? Describe how your idea works in context or how it applies to real-world situations.By including information about the surface where the cursor is placed in the message, you can save the effort of pressing buttons and making selections. 5. How is this issue currently impacting your organization? (Number of users impacted, hours of lost productivity, etc.)It takes a lot of wasted time to click to display the model information.   _________________________________________ Translated by the Community Moderation using Google Translate _________________________________________     スクリーンショット、画像、ビデオなどの詳細なドキュメントを含めてください。1.どのバージョンのソフトウェアを実行していますか?クレオ10.0.0.0 2.何が問題ですか?モデルなどのサーフェスにカーソルを合わせたときに表示されるメッセージは、Toolkit を使用して編集/変更することはできません。編集/変更したいメッセージは、添付ファイル内の赤枠で囲まれています。3.回避策を使用していますか?はいの場合は、説明してください。回避策は、ProSelect() を使用してサーフェスを選択し、ProMessageDisplay() を使用してメッセージ領域にメッセージを表示することです。4.あなたの組織にとってのユースケースは何ですか?あなたのアイデアが文脈でどのように機能するか、またはそれが実際の状況にどのように適用されるかを説明してください。カーソルが置かれた表面の情報をメッセージに含めることで、ボタン操作や選択の手間を省くことができます。5.この問題は現在、組織にどのような影響を与えていますか?(影響を受けたユーザー数、生産性が低下した時間など)クリックしてモデル情報を表示するのに多くの無駄な時間が必要です。

Let me rep out assembly featuresAcknowledged

The need of this functionality arose when we started using solid weldings in assemblies and when we started annotating assemblies in MBD. Initially, case 14976049 was opened requesting more info but unfortunately we obtained the explanation of the link below. At the moment it is not possible to do so. https://www.ptc.com/en/support/article?n=CS31266 This functionality would make our lives much more easier and would enhance Creo Parametric performance and flexibility. For example: It would reduce the number of files to be managed by Windchild (PDM), using only one single file (with several simpl. reps.) instead of managing one file per instance if the suggested workaround (family table) of the article were followed. It would be very useful to deal with assembly cuts (i.e: machinning operations at assembly level) that modify the geometry of the components adding them to simplif. reps. and checking the influence in the total weight of the assy. It would be very useful to add welding features to simplif. reps. and check the influence in the total weight of the assy. When you are working with solid weldings, there is a problem because when you create a simplified representation excluding all, you still have solid geometry (created by the assembly features of the solid welding seams). In general would be very useful to work with assemblies that include features that affects the mass properties of the assembly. It would be very useful to help populating the assembly for MBD. Combined states could be created easily based in different simplified representations where you include/exclude the features that modify the geometry of the components with the advantage that the mass properties of the assembly in each representation could be evaluated independently.

Time dependant Gravity Input for shock Simulation in Creo MechanismAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?CREO 72. What is the problem?I was trying to perform shock simulation of 20g on a dynamic system which is basically an automotive plunger Relay. I gave 20g shock load as an acceleration profile for 45ms (attached find the snapshot of the same). When I gave this as an acceleration motor, creo converts the profile to displacement profile with available initial condition and give displacement profile as the motor. However, in reality i expect, the acceleration to be acting similar to how gravity works in creo mechanism. So as expected the analysis shows a failure due to the fact that displacement reaches beyond my constraints.3. Are you using a workaround? If yes, please describe it.Yes. The workaround I am doing is that, converting the acceleration to force by multiplying it by mass of moving parts. Thereby developing a force profile and giving this profile as external force to the system. By adopting this technique, atleast I'm seeing the results which I expected. Although I'm not sure whether the result is reliable or not.My idea would be to provide a feature to the gravity load in creo mechanism where, I can add a time dependant acceleration profile to the system in addition to the constant gravity (g).4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I am working in TE Connectivity GmbH which is having a close collaboration with PTC Creo. My department is working on Automotive Relay which have alot of moving components which is basically a complicated version of spring mass system. If this idea would be implemented it could help us alot in understanding the dynamic system in response to shock load even without building the actual sample and testing.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Our department is in total 65. Speaking of hours, we could save alot on the time needed to validate the dynamics of the system without even building the sample.

Creo Schematics CID/WID Verification report export/save optionDelivered

1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Construction, Energy & Transportation and Heavy machinery Equipment. I am responsible for Creo schematics enhancement and testing within the enterprise for the Electrical designers2. What product and version are you currently running?Creo Schematics 3.0 M020. I also tested CS 7.0 and do not see the option3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When we verify our design using the CID-WID, we can see the details about “Missing Component Shapes” under the CID/WID à Components tab. But, we could not save (copy/paste) or export the report in the form of .CSV format. Currently, we taking screen shots in multiple sheets and reviewing the reports. The export report or save option would really help us to verify design and provide markups/comments to down the line user for updates.We are requesting to add those export report or save option across all three tabs Components, Connectivity, Parameters as per attachment. Please refer below Case ID #16513832. https://www.ptc.com/appserver/cs/view/case.jsp?n=165138324. What is the use case for your organization?We use CID/WID functionality to create subsystem diagrams and convert that into Wiring diagram before we design/flatten the harness assembly. Different users works on CID/WID, WID and Harness assembly files. When the file transferred from Schematic designer to detailer/harness designer, some CID/WID missing relationship can be corrected by the next users in order to verify the design. Currently, we can view the CID/WID relationship missing info on the tab, whereas we can not export the report or save the report as .CSV format. Taking screen shots and referring multiple sheet design is time consuming process and there is a chances of making manual errors. So, the report/save option can be tracked and update the status before move the file to next steps.5. What business value would your suggestion represent for your organization?This report option makes the improved quality of the CID/WID functions and the verification of our design can be validated offline. This can save the manual interventions and help capturing the errors in the early phase of designs (Schematic design) before the harness assembly design.

[Eztol] Rename action not synchronous in EztolDelivered

1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Chassis designer:use sheetmetal and solid in Creo Parametric & EZTol2. What version of Creo Parametric are you currently running?Creo 7.0.3 upgrade to Creo 7.0.83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In product concept phase, Users named their created parts or assembly by their favor. It likes SPS_muffler or flame which can let users know what’s that.And users can use Eztol to help them to check if their design can meet their requirement(6sigma). When product development phase change to pilot run, Engineers have to change part and assembly name on Windchill and follow company/factory rule, like change “sps_engine.asm” to “560_767a02_001.asm” as below picture shown. But if we go back to Eztol, we can find the Eztol doesn’t change part or assembly name synchronously.“SPS_muffler.prt” have been rename to “540_767A02_001.prt”, but it still show “SPS_MUFFLER” in Eztol stackup table. Although user can double click to change the part name in Eztol, but this still need user to rename manually. It does not make sense because Eztol shall be the Creo Integration solution. But Eztol in Creo doesn’t support rename on Windchill synchronously.4. What is the use case for your organization?We use Eztol to build TA stackup and generate TA report. But TA report is not only recorded and reviewed by designer, QA and Customers also have to check TA report. So how the TA generate report viewed impacts user experience.5. What business value would your suggestion represent for your organization?We can push Customer to accept to use EZTol more easily. And we can improve RD efficiency. 

Enable deletion of surface finish annotations in drawing modeAcknowledged

1. What version of the software are you running?Creo 9.0.32. What is the problem?Surface finish annotations cannot be deleted in Drawing mode, only in Part mode (MBD)... If someone makes an error while drafting and wants to delete the annotation, he has to go in part mode, show the annotation in MBD and then delete it. This is a significant decrease in productivity compared to previous versions of Creo and a source of confusion since the annotation can still be "deleted" in drawing mode but it will simply appear again using the show annotations command... There is no warning stating that the annotation has not really been deleted or anything... To the user, the surface finish annotation has been deleted, but then when you try to put a new one in place on the same surface, you get a warning in the message box that another surface finish is already applied on this surface. This situation has created a lot of frustration before the workaround was found (going in part mode).3. Are you using a workaround? If yes, please describe it.Deleting the surface finish annotation in part mode instead of drawing mode.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Everyday use5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)A lot of frustration and loss of productivity 

Creo-MBD -- enhance/improve PMI functionalityDelivered

Creo-MBD -- enhance/improve PMI functionality Requirement 1: Attach symbol instance to PMI/dimension via offset placement based on a stable link in Creo Solid Mode More generally: More generally: attachment of annotations to other annotations via offset placement should be possible in solid mode.If for example there is an PMI/annotation of type dimension in a part,then it should be possible to attach a symbol instance to this dimension via offset placement, so that this symbol is placed in the same placement plane as the dimension and with the same orientation. If the dimension is moved, then the symbol instance should also automatically be moved, so that the relative position is not changed. The relative position can be changed by moving the symbol instance. Requirement 2: Enable above functionality in Creo ToolkitAfter implementation of requirement 1 as described above, the existing Toolkit functions for creation of symbol instances should be extended, so that the creation with offset attachment is possible. In this case the placement plane for the symbol instance to be created should be the same as for the annotation, to which the symbol instance is to be attached. The explicit specification of the placement plane via function !ProDtlsyminstPlaneSet"should not be necessary. Requirement 3:Implement user based attributes for PMI Requirement 4:Enhancements of requirements 1,3 are maintained in exported neutral data file formats JT, STEP, means:- Relation between PMI and attached symbol is existing in exported formats- user based attributes are available in exported formats Relevant Use Cases:- Labeling of PMI´s/Annotations/Dimensions for characteristics/QS post processes- Enrich data set of PMI´s/Annotations/Dimensions for MBD post processes More detailed information see also attachment