Recently active
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Aerospace and Defense.Engineering Systems/Tools AnalystVery large Creo Parametric user base.2. What version of Creo Parametric are you currently running?7.0.8.0 in Production9.0.0.0 in Testing3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Having to individually select curves for the Project function within Sketch mode is extremely tedious. The system should be able to do the heavy lifting in this case by allowing Window Selection capabilities.4. What is the use case for your organization?Creating extrude features from very complex imported 2D geometry. 5. What business value would your suggestion represent for your organization?Much easier workflow for creating intelligent 3D solids from legacy 2D data.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Energy. Product Designer. Large companies with large orders. 2. What version of Creo Parametric are you currently running?8.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When opening the measure tool in a large assembly the performance drops significantly, and panning/rotating the model is painfully slow. As identified in CS307695. The best PTC has to offer on this bug is telling its customers to deal with it, as this has been marked as 'no plans to fix'. A workaround is not a fix. Changing the selection filter works, but takes time to open and find the desired filter. If you refuse to address the poor performance, at least let us set a default filter to use when opening the measure tool. If users need to change it from their set default, it is no slower than the way we all have to wor
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We design and manufacture high-end electronics. I am the CAD Manager / PTC SME. Stakeholders for this idea include our Creo user community. 2. What version of Creo Parametric are you currently running?8.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Reference: Case: 16087371 SPR: 13261009 In our PCB Board start-part, we have ecad areas for the annular rings around PCB mounting holes. These ecad keep outs are on the top and bottom of the PCB. We create an ecad area on one side, referencing the hole. Then we create the ecad area on the second side and reference the first ecad area. We group the 2 areas and reference pattern it to the PCB holes. This works great in the regular part mode. However, in the ECAD module (which is using the sheetmetal code), i
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Any industry using Sketches in Creo Parametric2. What version of Creo Parametric are you currently running?Creo Parametric 8.0 and 9.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When using "Sketch Region" to extrude a portion of a sketch, it would be more productive when it is possible to select the boundary of a sketch instead of selecting different regions. For example (see screenshots) when extruding the sketch in the picture as a full solid body, in the current Creo version(s) the designer needs to select the three seperate regions or areas. If it would be possible to select the boundary of the sketch, then the selection would be made in one click (see second screenshot).4. What is the use case for your organization?Productivity, better workflow5. What business value would your suggest
Currently, it seems to be impossible to use ModelCheck to find weak Sketcher dimensions.Please add this functionality.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Military industry2. What version of Creo Parametric are you currently running?6.0.6.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Sketcher works like this when having 2 circles and trying to create dimension:C+C: circle 1 center+circle 2 center = dimension from center to center = logicT+T: circle 1 tangent+circle 2 tangent = tangent dimension between circles = logicC+T: circle 1 center+circle 2 tangent = instead of center to tangent Creo creates dim from center to center = nonsense. Only one supported solution is to use centerline but it is silly workaround. Dim C+T not working even in Creo 9. 4. What is the use case for your organization?Confused Creo users5. What business value would your suggestion represent for your organization?Allowing to use Creo as intuitive SW
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am Kamlesh and I am a Mechanical Engineer working as a technical support engineer in GMMSPL for PTC Creo2. What version of Creo Parametric are you currently running?Creo 8.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Dear Creo product manager and the team, today one of our customer had reported the issue in Creo sheetmetal as below Sub:-Not able to create the miter cut for the below scenario As you can see below image, it took almost 4 feature to create this behaviour, but if we have the miter cut kind of functionality for the individual edge in one go then it will save the huge time of the designer I know the workaround is to use the flange command but some time it is not possible to use it.4. What is the use case for your organization?Increase the product
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Space industry, senior CAD and systems engineer, Our company and customers2. What version of Creo Parametric are you currently running?6.0.6.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In when performing an analysis on a component using Creo Simulate, through Creo Parametric, one can view the Results window. However, one is forced to close this window to go back into both the Simulate environment and to the CAD environment to make alterations. It would in many cases be good to have the results window open when going back to make changes, such that one can look back at the results window to see where these changes should be made.As a second step, one could envision a "Refresh" button in the results window that reruns the associated analysis and updates the results accordingly. A dialogue b
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Industry - High End ElectronicsRole - CAD AdminStakeholders - Engineering, downstream teams, vendors, etc.2. What version of Creo Parametric are you currently running?8.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When selecting a layer it currently only highlights the features in the first assembled instance in the assembly. As seen in the screenshot below when selecting the planes layer only the top version of the same parts features are highlighted. When the layer is hidden all of the planes are still hidden. 4. What is the use case for your organization?When trying to inspect parts selecting the layer to make sure everything is included per company practices and if not all the features are highlighted it can be confusing to see only half of the features selected wh
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.?2. What version of Creo Parametric are you currently running?73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Activate and De-Activate part in assembly from pull down menu4. What is the use case for your organization??5. What business value would your suggestion represent for your organization??
In the Creo Model tree, we would like to have the function of "COPY NAME" to copy the CAD part name as text after selecting the model in model tree with RMB click.
While using Creo on a secondary monitor, and you open an file in a new window the window opens on the primary monitor not the secondary monitor where your session is running.Creo 7 and beyond.Give the user (or at least a config setting) the ability to open a new window (file) on the same monitor as the current session is running.
Please add a configuration option that would force the user to resolve a circular reference as soon as it is created. The option could be turned off for users who are fine with creating circular references temporarily.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I'm the CAD business manager in a Manufacturer of hydraulic components for hydrostatic transmissions.2. What version of Creo Parametric are you currently running?8.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In the detail drawings, in the notes, when we activate the Bold button, the system add to the note's thickness a value of 1/15 of height, it will be appreciate to have a config.pro or a details option to tick the Default option of the Thickness to have a standardize value of thickness with Bold button. 1/ Note's selection2/ Bold button activated => Thickness = 5*1/15 + 0.34. What is the use case for your organization?Drawing details activity.5. What business value would your suggestion represent for your organization?Time saving in symbol addition and standardization
Presently, If the wire data tables in Creo Schematics are in English or Metric units and the Creo Parametric drawing is in the other unit family, HMX says "Mixed Spool Units have been detected and logged. Exiting" then kicks you out of the program.If someone has models in both types of units, they would need to keep two data tables on hand ans switch between them in order to make schematics.It makes sense if HMX can convert the needed values to match the spool information to the model.
I have been doing a study on this Creo 4 module, and there are some enhancements that I see as being needed. Being able to unbend is great for flex designs. However, when rigid/flex designs are considered the current implementation falls short of what I want to represent. Essentially it seems that PTC made a modified sheet metal design for representing the board which is a special .PRT . In order for unbending to work all features must be the same thickness. This is not the case in real world designs. Flex segments are thinner. The flex can come off of either side of the rigid board, out of a middle layer, or even from a combination, meaning that it is possible to have separate flex segments along the same edge coming off front/back/inner layers. Additionally, where connectors are placed there can be stiffeners that are a different thickness than the base board section. The minimum bend radius requirement of being driven from the board thickness is also not representative of
As of Creo 4 M040, these checks are very rigid and don't allow admins much flexibility to meet their business needs. Please add functionality to allow allow admins more flexibility to meet their company needs and make sure any changes/exceptions get included in the Creo Help Documentation. FORMAT_NAME - allow NO FORMAT as an option for admins to allow as many DXF 1:1 drawings don't have formats. MATERIAL_INFO SHTMTL_BENDTAB - the Creo 'Not Assigned' works well enough for many of our use cases... please allow NOT ASSIGNED to be an acceptable bend table value for admins to allow if desired. STD_DTL_SETUP Please add a way to toggle using Creo defaults for not specified DTL settings or take the approach if the DTL didn't specify a setting then the admin wants users to be able to adjust that setting. Adding the option to pick DTL files based on the current drawing format name (not just the format size) would increase the flexibility of this check since we have differe
Add Annotation Display to Datum display filters drop down in quick access tool bar It would be nice to turn the off the annotations with the rest of the non model geometry features
Extrude has option taper, but only in one direction. When I using extrude with depth: side 1/side 2 or symmetric - taper is not added in two directions. From my point of view good idea is add this possibility (something like option split in draft). (view in My Videos)
Add Date and Time to the Message Log in Creo Parametric. Similar to View > Line Numbers option that's already available today.
Add a check box to specify inertia relief (PARAM, INREL, -2) to the GUI. Also, there is an error in the current exporter where it doesn't write out a new subcase for an analysis that only contains a gravity load. Since a subcase can only have 1 LOAD= declaration, it effectively overwrites the load for the previous subcase/analysis.
We are seeing random behavior when our users are saving models. Sometimes the model file history gets truncated to the point of the current save. We, and R&D, are struggling to find the cause. If Creo can create an error for the user, we can inform the users to stop when they see this error and tell us; so we can figure it out at the time of truncation. Otherwise, we don't know about the truncation until much later. The trail files don't seem to help us either.
Creo 4 default is "Copy form model using dependent merge". This setting only allows you to select Automatic Update in the shape tab. Would like to have a config option to set "Copy form model using independent inheritance" as a default, this allows user to choose insert type. Could possibly combine these buttons as an alternative and to set Shape tab to Automatic as default.
There's a number of active suggestions but I figured I'd try to create a more generic one that people can add to in the comments and try to unify the requests. ProToolkit has very poor coverage in Creo Simulate and that is where I spend most of my time. Missing basic features include: Export batch run for native analysis, retrieve analyses in the model and check if they are valid (have active loads/constraints), create new analyses in FEM and native mode, accessing/deleting the FEM mode mesh after running fem export. Other requests I've seen- retrieve simplified rep on sub-assembly component instance, retrieving information for PRO_EDGE_END_PNT.
Creo will find automatically pick an alternate reference for many features when you make a change that modifies or replaces a feature in the model, such as adding a draft or combining similar features. The reference is then marked with a yellow dot to indicate this. I would like to be able to "accept" this substitution to remove the indicator that something may not be correct. Currently the only thing I can do to remove the substitution is delete it and reselect.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.