Recently active
In Both Creo Simulation live Plus and Creo Flow analysis, we can't easily create the fluid domain if one of the openings is surrounded by multiple surfaces. It forces the users to create the fluid volume manually with surfaces copies, merges, ... which is long and might be unstable in case of modifications. It can happen quite often as Creo divides all cylindrical surfaces in 2 separates surfaces. In the attached screenshot, I've recreated a simplified representation of the limitation. A simple fluid vein represented by the radial hole made in the tube cannot be created because the hole crosses the 2 half cylinders.
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 9.0.4.0 / Windchill 122. What is the problem?Would like to stop users from replacing parameters in a format with a manual text entry.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Example: The PTC_WM_REVISION is called out in the rev block on the drawing. User can go to 'Properties' and remove the '&PTC_WM_REVISION' and replace it with text of any revision they wish. Revision is controlled by Windchill and should only read from Windchill.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Will impact all parts of the company if a user manually enters a revision. When a new revision is created, the revision will not upd
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo Parametric 9.0.4.02. What is the problem?Feature name should be hidden when using "Edit dimensions". At "Edit Definition" the feature name is hidden.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Should make the model clearer.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)300 users
It would be great to have a smarter line generator when creating Explode State.In this simple exemple, we can see that it's hard to have a correct result at the first time .Not easy and really powerfull.
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 9.0.2.02. What is the problem?Use_direction Api not implemented3. Are you using a workaround? If yes, please describe it.No.4. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Morethan 100+
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 8.0.8.02. What is the problem?When adding a Table (BOM, Revision etc.) onto a Creo Drawing, there is not simple way to lock the Table into a consistent position.3. Are you using a workaround? If yes, please describe it.Currently when a new Table or a new Row within a Table is added, we must Insert using the X/Y coordinate system. This offers a solution, but also assumes that new users know how to use it and that experienced users remember the X/Y values at all times. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.There should be anchor points that can be added to the Drawings templates. When a Table is added to the Drawing, the Table should lock to the anchor point so that it is constantly placed and located. This keeps all Drawings looking clean and organized.&nbs
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Windchill 12.0.2.9 2. What is the problem?There is no preference to make the radio buttons default to "change" when using the Set New Name UI while Renaming. The optional radio buttons for New Number are Unchanged, Autogenerate, Generate document number based on related Part and Change. The optional radio buttons for New Name are Unchanged, Same as number and Change. However, the only options in the preferences menu for New Name and New Number are "Unchanged" and "Autogenerate". We want the option of "Change" so the user doesn't have to select these two radio buttons everytime they enter this UI. 3. Are you using a workaround? If yes, please describe it.The workaround is to train the users(and maybe they will listen) and have the user's manually select the radio button for change on New Number and New Name when they ent
Modelcheck is able to identify objects that have non-standard primary units. It is NOT able to identify objects which have been assigned a custom System of Units. We perform a lot of analysis operations on our Creo models, and it complicates life for us if users assign a custom System of Units.
Please add the ability to check for Creo Update Controls settings on external references. A company may want to not allow some of these settings. Example - choosing not to allow Automatic Update but allow Manual Update and No Dependency.
Currently, Modelcheck can check what "date code" of Creo generated the file. The date code is specific to a single build. I just want to see what version of Creo was used (e.g. Creo 4 or Creo 5).
When creating a CAD object in Creo Parametric there is no warning or error message when an unacceptable parameter value is entered for user defined parameters that have a predefined list in the start part. When an unacceptable value is entered input appears in the field but in reality the parameter remains undefined causing problems down the road. Users are misled because the value appears assigned. Currently there is no prevention or status feedback. Use Case The parameter is associated to a required constrained Windchill attribute that has more values on its list than the Creo Parametric assembly or part. It’s set that way because drawings utilize those extra values. So a user (who thought s/he assigned the value) ends up having to reassign the attribute in workspace prior to check-in. Here comes the kicker. The user assigns a value that should not be assigned to an assembly or part, a value that is only meant for drawings. The asse
Creo 4.0 now reads the unit of imported DXF files in 3D models (defined by value of $INSUNITS) So if the DXF unit is not the same as your part setup, the geometry is wrongly scaled. Unknown problem in previous releases... PTC workaround is to edit the DXF file to change the $INSUNITS value. Not acceptable for users in 2019. Please provide import conversion functionality for this case, as it exist in other softwares... Thanks.
allow for offset surfaces to be created at a selected reference instead of being controlled by a dimension only.
we have recently upgraded to Creo 4 and we have learned how to work with the annotation feature. It is convenient to place all datums, geometric tolerances and surface finishes on the model and just press "show annotation" on the drawing and drag them to the desired location. What is frustrating about that is that we did not manage for some surface symbols to be dragged out of the geometry. Most symbols can be dragged along the dimension witnessline to make them clearly visible. Some just remain on their sometimes tiny surface within the geometry which makes them hard to read. Why can't this be changed that the symbols are all able to drag a symbol witnessline along the dimension witnessline, same as it works for geometric tol symbols or datum symbols?
We are using imperial threads a lot, e.g. 3/8-16 UNC. When we create it with the hole manager and select it on the drawing with "show model annotation" we can only see the nominal metric dimension. We would like to see the actual thread name, like mentioned before. We know that it is possible to show the thread note on the drawing, but this is not the way we want to show the dimension of a thread on the drawing. According to VSM standards compendium it is allowed as simplified dimension but we usually create drawings not simplified. With a created (added dimension) on the drawing it is possible to replace @D with @o and then type the threads name. Why isn't this possible with a driven dimension from the model? In this case with the thread mean diameter?
Curves exported from the drawing (drw) are segmented when saved-as STEP format. Curves are "correctly" exported to STEP format when saved-as from part (prt). Thank you for finding a way to correctly export non-segmented curves from drawings to STEP format.
FEM calculations should provide more valid results in earlier development phases of a component than with sharp-edged models. For this purpose, it is necessary to completely round incompletely modelled packages. This should be done automatically with the AutoRound function, since there is no possibility for manual modeling of these roundings.The AutoRound function of the PTC in Creo Parametric (Ver. 4.0 Mxxx) does not meet expectations.
Currently skeletons cannot be moved from one assy to another using the restructure command. The skeleton can only be deleted from the first assy and then reassembled to the second. This is an issue if an internal copy geometry has been made to the skeleton within the assy from another model. Enable the restructure command to be applicable to skeleton models and retain all internal copy geometry between the skeleton and all other models within the assy hierarchy when the skeleton has been restructured.
I think title says all.Bye
I mean the opportunity to suppress/unsuppress components "only in simulate environment", as now happens with the Remove feature (see pic).
API ProsolidMasspropertyGet() properly returns the COG calculations with a selected coordinate system, but neither this nor any other API gives the option to change the mass property calculations/attributes (pro_mp_mass, etc) to a new coordinate system.The only way currently to change this is through File -> Prepare -> Model properties -> Mass Properties -> Select CSYS -> Calculate, which is cumbersome to get to.
Current Detail View notes create "DETAIL__X", "SCALE__XX". Users must manually remove the double spacing between detail and letter callout in the view note for every view. Please allow this to be globally set to remove the double spacing.
When component placement is outdated and cannot be udpated through regeneration, it will not necessarily show in notification manager/modeltree for easy reference, and only when component is redefined is the error presented. Please add this regeneration warning to Notification Manager.
Buongiorno, ho riscontrato una limitazione nel software Creo Parametric presente già dalla prima versione e mai stata implementata. Nel settore utensili dove tutto ruota attorno ad un asse mi trovo un vincolo dovuto a questa limitazione di Creo Parametric dove non posso creare una rivoluzione (superficie, solida, asportazione, ecc...) se l'asse non si trova sullo stesso piano dello sketch. Ho effettuato una richiesta di supporto ma non rientra nelle problematiche da risolvere pertanto se qualcun'altro avesse questa necessità vi chiedo di segnalarlo e ampliare questa discussione affinche venga presa in considerazione dallo staff PTC. Grazie mille
Salut, we have Drawing option "default_tolerance_mode" (nominal/plusminus/plusminussym...) but missing option for default_tolerance_table. We need to preset "None/General/Broken Egde" for new dimensions in config. Nowadays we must manually set every dim like "None" in order to allow modification of dim tol value by mouse doubleclick because in "General" mode it is not working. Solution via mapkeys is clicking orgy...
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.