Recently active
It is recommended that the character height that is pasted by copying the note character be the character height set in the note.
I would like to see a Model Tree Column info that shows if a feature "has children" (yes/no) to help cleanup legacy models being copied and re-used. By quickly being able to see in columnar form which features do not have children (the "yes" would not necessarily need to be displayed for my purposes but the "no" definitely) helps greatly to quickly identify features which may not be needed and could be deleted from these new models carried over from legacy.
When you utilize Creo + Windchill it could be nice having a visualization of the components' status directly in the model tree.Even now it is possible, but only through by adding columns with text inside; this scenario means a large model tree on the screen and a bad visualization (in my opinion). What I suggest is the presence of the same windchill icons inside the model tree. So, if a component is under checkout, I gonna see the blu/yellow square in the tree.Obviusly, this should be an option activable on request by config.pro or similar thing.
Insert in the config option the item that enables the "Clean Pro/Program code for new models" option.
When the = (equal) constraint is picked it should filter out centerlines as centerlines can not be equal to anything.
Would like a function that will show me the references for a created dimension. Currently in Creo 4.0 M09 there is no way to do this. You can edit the attachments of the dimension, but this does not show the existing references. User created a dimension, another user modified the design and was complaining about dimension not updating or show as out of date. When looking at the dimension it appeared he was correct, but in fact the first user created the dimension wrong. There was no way of finding references for created dimension. Case was created with PTC, which resulted in waste of tech support time. Please consider adding this functionality. Wayne Schrock
Hi, in Drafting. user can add the dimension with the tolerance. but in Creo there is check box to display tolerance upper limit and lower limit. but there is no API in creo toolkit to know whether that tolerance upper limit and lower limit is visible or not. please plan to add an API to get the tolerance upper limit and lower limit is visible or not in drawing. Regards, Vipresh shah
Sketch dimension constraints looks, not so productive. We can't see the dimension until we apply it, and if it's not what we need, we need to delete it, and then make a new one. When we create a fillet in sketch environment, some dimensions disappear, we need to create them again. I think sketch needs some improvements, to ensure CREO productivity. Remember that every feature, needs a sketch!
Today, we are able to insert colors to parts, using intent selection, paint individual faces, complete part, quilts... But if the number of surfaces in the model changes, the color applied to the new surfaces, is the color of the part. It should be possible to maintain the parametrization of selection intent to maintain the color of the selected intend faces, features, quilts... Today many CAM softwares needs the information of colors in parts, to automate the milling process.
Every day I need to flat complex sheet metal parts, and always need 3rd party software to make this. I saw that Autodesk inventor is doing well in this. Creo should have a similar thing. See inventor's video: https://www.youtube.com/watch?v=fhleh8ZRU7M Another possibility is to having inbuilt software like Fastform.
I mean what you can see in the attached pic.
Allow custom naming convention for auto-generated sheet metal flat instances. Currently, the behavior is to suggest the naming convention <filename>_flat1. The prompt does allow you to change the name before creation, which at least lets the user correct it, but it would reduce user error if the auto-naming suggestion conformed to our business logic. Current Version: Creo 4 M060
Need a way to toggle the attachment of the leader elbow to the different lines of the stacked dimension text. This is possible on an annotation feature note like the one shown in the attachment by right clicking on the small red dot and selecting the right two options on the pop up menu.
At the moment, there is no way to arrange the parameters that appear when you click on new -> part or assembly. We need the users to fill in a variety of parameters against the part, that are synchronised with Windchill and the current order (alphabetical), makes no sense to the users. Please make a mechanism whereby the parameter order can be set, ideally make it follow the order in which the parameters are set in the tools -> parameters window.
We have a section of our business that now run Creo as a standalone, using legacy data that was originally created in Intralink/Windchill. These legacy models when opened will display their REV and RELEASE LEVEL at the top of the screen. I've concluded they are driven by the parameters PDMDB, PDMREV and PDMRL. When creating new parts outside of Windchill, these parameters are obviously not automatically created. If you try to create them, Creo will deny and tell you that they are reserved. To get round this I added config option 'allow_create_pdm_param=yes'. Now I can create the PDMRL and PDMREV parameters manually and add some values - Creo then populates those values at the top of the screen Inquiries with support suggest this is hard-coded to PDMRL/REV. It would be good if we could change this and select which parameter(s) appear.
I have played with Inventor for some project, and I really appreciate the possibility to set a component visible for the Bom directly in the model tree. If the component /assembly is set as Default Normal(1) - the Bom will normally recognize it If the component /assembly is set as Reference (2) - it will be excluded automatically from the Bom Derivation, Mass Calculus and In the Drawing Environment is shown with a dotted line style. In the attached file an example: the red component comes from another Purchasing Assembly and needs to be used just as "Reference" for other components, It should not be part of the bom of the Asm006.asm, etc.etc. Actually we have to fight with ( Skeleton, Publish/Copy Geom, Exclude in report bom in drawing, etc.etc. I suppose this would be a much easier way. thanks D.
I am sure that the topic concerning partial circle representation in drawing has been discussed here several times. Unfortunately, I have not found in this regard here in the forum. Is it possible or not interesting that is the circle in the model is shown why not in drawing? See Attachement
It is possible to duplicate an annotation (select > right click > duplicate). This can be useful when you need a similar annotation with similar references as one that already exists. Generally when duplicating an annotation you will want the new annotation to be visible in the active combined view. However it does not currently work that way, after duplicating you then have to select the new annotation and click "Add to State" so it will be visible. It would be nice if the new annotation is automatically added to the active combined view.
Currently in Creo 4.0 M100 you can not remove the locked PTC parameter which were created during an import with ATB on. Per CS48983 you must delete the import and reimport. This is a waste of time, there may already be references to the geometry. If you make the ATB "Make Independent" then there should be no need for the locked PTC parameters. Please remove the restriction of removing unwanted parameters.
We would like to add the GTOL Indicator directly do the dimension – without a GTOL itself (the same as on the screenshot from the DIN/ISO norm I have attached to the Case).
This is needed.
In the old style menu of classic NC steps it´s possible to add cl-command’s without accepting the text. Therefore, a click on the "OK" button is enough. In all NC features implemented in the "new" GUI there is an additional click on "accept" necessary. Many users forget to click on this accept button and it´s an additional click for every CL command. So please implement the same functionality in the new GUI as in the old one (safe CL command without clicking on accept). classic NC featurenew style GUI with additional click necassary
Please add the "compute CL" command to the list of configurations options, which was implemented with the config.pro option "mfg_misc_user_options" which is available since Creo 3 M170 for regenerationfor CL-Data output
Please consider the following workflow: You design a part You run an simulation on it You run a topology optimization on it ( based on the constrains defined in simulation env ) You get the resulting part ( optimized ) Now you would like to run the same simulations you run on the original model ( to verify performance ). In order to do so you need to define the constrains from the beginning ( which may lead to mistakes ). Should you had the ability to "carryover" the constrain from the original model ( as the constrain area haven't changed ) to the resulting ( optimized ) model – It would save considerable amount of time and reduce risk of mistakes. this shouldn't be hard to implement as the constrained geometry remains "as is" and doesn't changed due to geometry Reconstruction.
Hello, Wouldn't it be the right time to update ( or sustain ) our beloved Spin Center with something more modern and useful? I think the title is self explicative. But I add a picture to let you understand how other 3d software helps the user in the view management ( spin, zoom, set view/rotate/pan/constrain view movement, etc. ).
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.