Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10. 2. What is the problem?Message log tells me clues instead giving me a more complete information about the issue at hand. Capturing information from it is tedious. 3 examples: a) If there is a model in an assembly and its layer state was altered, then upon saving the assembly, a message will show up (in black): Problem is that often, I have no good idea as to which model it was that was saved (with its layer status not saved). I am suggesting that the name of the relevant model is added in brackets at the end. b) If a dimension is driven by a relation, then attempt to modify it by double-clicking on it will result in a warning message: Problem is that I don't know where this relation is - because it can be a part level relation, or it could be a feature relation... it could even be a feature relation in a completely different feature
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0.x.0 until Creo 10.0.x.0, including Creo 11 Beta and Creo+2. What is the problem?It is not possible to filter a Repeat Region in a table on a drawing, based on the BOM Balloons displayed on the drawing views.To reproduce this:1. On a drawing, add a table with a Repeat Region (e.g. BOM list)2. Add Balloons to the drawing views for most but not all BOM items in the table3. Now the user should be able to filter out items in the Repeat Region in the BOM table based on the condition if there is a Balloon present in the drawing.3. Are you using a workaround? If yes, please describe it.Now, the user does this manually by selecting and excluding each item in the BOM table but for slightly larger assemblies this becomes very time consuming.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical sit
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 9.0.4.02. What is the problem?Part or (sub)assembly parameters cannot be referenced in a 3D note at the assembly level. This behavior appears inconsistent because bulk item parameters can be referenced in 3D notes at the assembly level. The parameters for a bulk item can be reference at the assembly level 3D note using <parameter>:FID_# where # is the feature ID of the bulk item. However, if a lower level "component" is a part or subassembly the above method does not work. Nor does using <parameter>:SID# where SID# is the session ID allow the lower level parameter value to appear in the note. 3. Are you using a workaround? If yes, please describe it.There is a work around in that in Relations one can create a parameter <parameter_test> and declare it equal to the lower level parameter using
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 9.0.5.02. What is the problem?There is no Creo Parametric Toolkit API to get Tab Display status of combined states.3. Are you using a workaround? If yes, please describe it.No, I couldn't find any workaround for this problem.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We are trying build a CAD quality check tool for MBD models and practices. In which, we have some rules of checking related combined states management practices in a Creo model to ensure user doesn't miss any of the combined states during publishing. So, we need an API for query Tab Display status of a combined state through.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Since we are planning to deploy this tool al
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.2.02. What is the problem?I want the Tessellated/Brep information of Cable Cosmetic Features like Tape & Marker3. Are you using a workaround? If yes, please describe it.There is no way, i could get the BREP information of Cable Cosmetic Features (e.g. TAPE and MARKER) 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In our organization, i am converting the detail feature of Cable Cosmetic Feature in JT File.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It has a huge impact on our application as , we could not convert the TAPE and MARKERs to JT Files
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.7.0 2. What is the problem?We are aggressively attempting to use the ECAD MCAD Collaboration Standards (IDF and IDX) but are running into some stumbling blocks, especially with holes. There are many holes in the board, like a standoff hole, that is already included in our decal/cell of the standoff within the ECAD tool (PADS, Xpedition). So when the standoff is in their layout tool, it automatically places the hole. Which means, they don't want the EMN file we send them to include another hole. The PCB team would need to search through the import and manually delete the holes each time! It gets even weirder. The PCB team uses parts for regular mounting holes as well! Even if there is no actual part, they create one with a simple hole. This helps for routing within the schematic and other reporting metrics as well. I believe there is a convoluted way to make th
Often user would like to connect geometry and create constraints manually because automatic snapping and sketchers constraints assumptions are not providing correct result. Anyways this need is often temporary need for every second drawing operation and most of the time snapping and assumptions are useful. Therefore user should be able to alter sketcher behavior in split second. Creo should provide easy buttons to toggle snapping and constraint assumption settings instead of need to travel to options menu. Maybe default selection menu in right bottom corner could be expanded to contain more functionality with regard to snapping and assumptions. Creo should also offer keyboard key that can be hold during drawing geometry and holding it prevents snapping. Other key hold during drawing should prevent constraint assumptions.
Hello,The current implementation of the shrinkwrap tool does not allow for the creation of a solid model of just the external geometry. We are required to send our customers "Outline" models that they can use in their assemblies but our customer does not have the rights to see the inner features of the outline.I would like the shrinkwrap tool to have an additional option to just capture external geometry. Meaning that when cross-sectioned the model is actually solid inside with absolutely no internal features but all external geometry including color (if possible), mass props, and center of gravity for the outline are preserved.Thank you,William Cronin
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.2.0 and Creo Elements Direct 20.6.1.02. What is the problem?Environments scanned with a 3D scanner cannot be loaded in Creo.3. Are you using a workaround? If yes, please describe it.No.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.To create custom made machines, walking platforms, piping in a production environment, the room is scanned with a 3D scanner. This gives a perfect lay out of the room and reduces errors of manual measurements.eg. A conveyor belt needs to go through a wall from one room to an other and has to drop the product into a machine. The hole in the wall is and the machine is already existing. So the room needs to be scanned and the conveyor belt will be drawn into the scanned model.5. What impact does this problem currently have on your or
Creo should be able to directly open an embedded part such as PRT0002<<ASM0001>>.prt, without first having to go through its parent assembly.Ideally, I should be able to just run a BAT script containing a command like:"C:\Program Files\PTC\Creo 10.0.0.0\Parametric\bin\parametric.exe" "C:\models\PRT0002<<ASM0001>>.prt.1" 1. What product and version are you running?Creo Parametric 10.2. What is the problem?Currently, the embedded component cannot be opened directly via a BAT script or from another program.3. Are you using a workaround? If yes, please describe it.One can first open the assembly file, e.g.:C:\models\ASM0001.prt.1...and then in the feature tree in Creo, the user must manually find the right component, e.g.:PRT0002<<ASM0001>>.prt...and then right-click it and click "Open".4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In our own software, we pr
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 7.0 2. What is the problem?It is difficult to remove a component or subassembly from an explode state. Occasionally parts of a subassembly are moved instead of the subassembly, and it is not noticed until later. To remove the explode position from a part, you must find the part in the list in the View Manager Explode Properties (which may be 100+ parts) select it and select Remove. I would like to see a function in the Edit Position Explode tool to remove the explode state of a selected component. 3. Are you using a workaround? If yes, please describe it.- Exit the Edit Position Explode Toll and scroll through the list to find the part, then select Remove. - Copy position to a part that has not been moved. (still has an explode position) - In the Explode tool, select part, RMB, select Toggle Explode (still has an explode position) - In View Manager - Explo
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?I'm using Creo Version 72. What is the problem?Lack of cable routing options in cabling application. I can't wrap wires around a cylinder.3. Are you using a workaround? If yes, please describe it.Select "on surface" and click multiple times around and around and around. It looks very messy and adds a lot of wire locations.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We thermally anchor our wires and cables around support legs and struts by wrapping cables them around and around a object to ensure good thermal contact and dump the heat. Currently you can choose to place or offset from a surface or place on an axis. I would like the option to offset from an axis to be able to rotate the wire in a uniform way around the axis. An alternative option is allow it to go on an existing
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.7.0 and 10.0.2.02. What is the problem?Config option to stop Creo 9 layer/model/body/design items trees from snapping to various corners on the Main Graphics window.3. Are you using a workaround? If yes, please describe it.None other than having to drag/undock them4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. A new config.pro option or window setting.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)N/A
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 8.0.52. What is the problem?Can not save as a component that is included in an inseparable assembly.For example, I would like to save as STEP one of the sub-assemblies in an inseparable assembly. 3. Are you using a workaround? If yes, please describe it.Yes I can extract the sub-assembly , change its name and save it as step , afterwards re embed it into the inseparable assembly.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.When we need to save as step one of the sub assemblies in an inseparable assembly.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am an engineer designing resistance welders.2. What version of Creo Parametric are you currently running?We are now running 8.0.1.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When creating a simple hole, there are no notes associated with the hole that come up with the Show Model Annotations button in a drawing, unlike standard holes. Given that even a simple hole has a diameter parameter and a depth or thru option, I would guess that there is a parameter associated with those that could be put into a note that would be parametric to the hole feature.4. What is the use case for your organization?We create parts with holes and create detail drawings for them.5. What business value would your suggestion represent for your organization?Time-saving when creating drawings.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 92. What is the problem?Geometry on a drawing has changed, requiring the origin of the ordinate dimensions to be moved to the new surface/edge. Creo lacks this simple functionality. 3. Are you using a workaround? If yes, please describe it.Re-dimensioning the entire workpiece. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.An unfolded sheetmetal piece is dimensioned ordinately. Drawings are still published for workorders and for press brake operators to use. When the part is modified or changes made, the origin references of the ordinate dimensions are sometimes lost of changed currently requiring the cad user to have to redo every ordinate dimension so that it references the new originate reference. 5. What impact does this problem currently have
This is a test idea post for our upcoming European MBD TC to streamline the requirements from this group
Hi! I think will be good to have in drawings more options for snapping betwean:- format border lines,- drawing tables simple but useful 😉 BRRoman
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Healthcare, CAD-Admin. Training designers need info from R&D2. What version of Creo Parametric are you currently running?83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We want to export cabling assemblies to Blender for training purposes. Therefore, we use FBX and .obj. Our harnesses are not converted. Is this possible at all? I am not an expert in this field.4. What is the use case for your organization?Benchmarking between Blender and Creo Illustrate5. What business value would your suggestion represent for your organization?
I'm Cad manager in watch making industry. We are currently using the release 8 of CREO Parametric. To share the content of MBD models defined in CREO Parametric we use 3D PDF created with Theorem provide by Theorem Solutions. The Theorem converter embeded in CREO use API to retrieve a lot of informations and details. If we consult a 3D PDF created with Theorem in a PDF reader, for geometric tolerances we are able to show the attachement references. But it's not possible to show the same for dimensions. The current API can't retrieve the information through the 3D model. Theorem development departement has made tests with the CREO 9 release and the ProAnnotationelemReferencesCollect() and ProDimensionAttachmentsGet() features have not been improved and they work as in CREO 7 or 8. The main goal is to give the better understanding of the 3D model inside the PDF. The business value with this improvement will be to retrieve in the
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Hello I am Kamlesh Kailas Joshi from GMMSPL (one of the value added reseller of PTC)2. What version of Creo Parametric are you currently running?I ma currently using the Creo 8.0.3.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.There is an issue regarding schedule for fittings in Specification driven piping.1. Changing Pipe SIZE - OK.Example for a 90 Bend fitting .ptd file:"SCH_RATE" "SIZE" "NSIZE" "BSIZE" "END_TYPE" "NEND_TYPE" "FITT_MODEL_NAME" "WEIGHT""40" "2" "" "" "BW" "" "N004E0504-P281""80" "6" "" "" "BW" "" "N004E0801-P281" This .ptd file works fine and when you change the pipe size from 2 to 6 in the 3D model, then the fitting (90 Bend) is automatically replaced from fitting file N004E0504-P281 to N004E0801-P2812. Changing Pipe SCH_RATE but having same pipe SIZE - NOT
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.design of construction of mould2. What version of Creo Parametric are you currently running?Creo 8.0.3.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Sorry for my English.During the restructuring phase of components imported from step, with sub-assemblies with the same name but in different assembly positions, the contained parts are restructured for a sub-assembly while for the other sub-assemblies the parts disappear (see attached video). The new idea is to have a flag (to be activated if need) that allows in the import phase to give a distinguished name for the repeated sub-assemblies.Fausto4. What is the use case for your organization?restructuring phase of components imported from step5. What business value would your suggestion represent for your organization?higher speed in the execut
Hello,It would be more useful that the default name given for Shrinkwrap Parts could be derived from the assembly name even if a simplified representation is active. “model name” + (”name of representation if model is displayed in Simplified Representation”) + ” sw000x” Currently, the default name for Shrinkwrap Parts is derivedfrom model name, if model is displayed in Master Representationfrom name of representation, if model is displayed in Simplified Representation This current naming convention using name of representation if model is displayed in Simplified Representation is an exception for all the Creo parametric Exports. Our assembly templates have defined Simplified Representation and we activate them for Shrinkwrap exports. We need to systematically change the suggested name. Default name for Shrinkwrap Parts should be derived from the assembly name
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 8.0.7.02. What is the problem?Creo 8 introduced the Inseparable Assemblies. PROTOOLKIT and Jlink don't have API to know if an assembly is inseparable or not. PROTOOLKIT has a workaround described in the article CS389461: Toolkit: Is it possible to determine whether inseparable objects are used in an assembly in Creo Parametric and Windchill? 3. Are you using a workaround? If yes, please describe it.No, is not available.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We have a customization that read the part or assembly members of the assembly. With inseparable I have now some nullpointerexception, I would like to ignore inseparable children.5. What impact does this problem currently have on your organization? (Number of users affected, hours of los
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?8.0.5.02. What is the problem?Broken Views3. Are you using a workaround? If yes, please describe it.I create an actual broken part "REP".4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I would help display multiple layers or laminates.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It would help to provide a better visualization of the component or components.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.