Skip to main content
May 27, 2023 12:43 AM UTC
Acknowledged

BROKEN VIEWS - FOR TUBES

Related products:Creo Parametric

Please include detailed documentation such as screenshots, images or video.

1. What version of the software are you running?
8.0.5.0


2. What is the problem?
Broken Views

3. Are you using a workaround? If yes, please describe it.
I create an actual broken part "REP".

4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.
I would help display multiple layers or laminates.

5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
It would help to provide a better visualization of the component or components.

16 replies

olivierlp
Community Manager
May 30, 2023 2:40 PM UTC
Status changed to: Clarification Needed

Thank you for publishing your idea, @iDZignit. However, you gave the bare minimum. The more details and context you give to document your idea, the better. Think about ways to educate and convince other Community members to support your idea and present your case to the product management team for consideration. You may simply add a comment to your idea

Please let us know within the next two weeks.

 

Here are a few examples of well documented ideas:

Improve/fix the sheetmetal mirror feature - PTC Community

[Eztol] Rename action not synchronous in Eztol - PTC Community

Always enable ability to 'Add View Label' in a dra... - PTC Community


Additionally, I invite you to check out this topic where PTC executives explain product managers' approach to customer ideas and input for product roadmaps.

 

Olivier
May 30, 2023 3:04 PM UTC

The request is in relation to ASME 14.3 rod and tube breaks.

It would definitely be a nice to have option

StephenW_0-1685458985510.png

 

iDZignitAuthor
May 30, 2023 3:50 PM UTC

Just wanted to start a conversation, the Memorial Day weekend was looming...

 

I've needed to show the broken view in a number of forms.

I work on Med devices and we use hypo tubes extensively.  They are often cut up using a laser cutter.

We utilize the toroidal bend function quite frequently as well, as we like to show the "flat pattern" of the laser cut sequences.

These laser cut sequences may start & stop thru out the length of the tube.  Most likely the "broken" view will show a number of these areas.

I typically set all of these parts up in an assembly and use the "simp rep" that the assembly mode provides so easily.

I also leverage the "top down" method using a skeleton for driving much of this.

I will show the tube geometry with the feature tree.

1.  Master Rep all features active.

2.  Simplified Rep NAMED:  Broken with the last feature excluded. .The merge feature isn't necessary to exclude.

iDZignit_0-1685461422679.png

I use the layer function to "Hide" the surface features which are used to cut the tube in the broken rep.

iDZignit_1-1685461581825.png

iDZignit_2-1685461805113.png

 

 

 

 

iDZignitAuthor
May 30, 2023 3:54 PM UTC

Key to the display on the drawing...

I use the points in the sketch to ID my break points in the broken view on the drawing.

iDZignit_0-1685462037209.png

 

olivierlp
Community Manager
May 31, 2023 3:58 PM UTC
Status changed to: Acknowledged

Thank you @iDZignit and @StephenW for the additional info. Based on this, we are acknowledging it as the Community management team. This is not a commitment from the Product team. Other users may comment and vote your idea up.

Olivier
iDZignitAuthor
Jun 1, 2023 5:33 PM UTC

Typically, the tubes that I work on are NOT 4 units longs...they tend to be hundreds of mm or a 50-72 inches in length.

There aren't many use cases for using the perspective view function in Creo but this one certainly may be one.

 

iDZignit_0-1685640717042.png

 

iDZignitAuthor
Jun 8, 2023 6:38 PM UTC

Bad post....my bad.

 

Another problem with "BROKEN VIEWS" in general...!!!

If you look at the last image I posted regarding this topic.

You can only utilize the "LOCAL" cross section if you DO NOT use the included broken view functionality.

So, in the image above because the displayed broken view is only 4 units long I am able to create a "local cross section".

iDZignitAuthor
Jun 8, 2023 6:44 PM UTC

This functionality can be built using solid bodies or as I've shown with surfaces.

It would be SO COOL if there was a "model based" break feature that would be parametrically driven by the "TUBE", "ROD" dimensions to simply create a "BREAKER" body that would allow for MBD based models to be broken and therefore also trickle into the drawing functionality.

iDZignitAuthor
Jun 8, 2023 6:54 PM UTC

Thanks @StephenW for reference image!

iDZignitAuthor
Jun 8, 2023 7:11 PM UTC

SORRY, I withdraw my post regarding "local X-sections" in "broken views"...I was wrong.