Recently active
We design and manufacture molds and die assemblies with lots of holes. We use an ordinate scheme to dimension these holes. unfortunately we have holes close to other holes and the leaders don't automatically adjust when they are close so we have to add jogs manually. If we change the hole location the leader needs to be adjusted again. Solidworks does it and our seats of Cadkey from 1992 does it. This would save us gobs of time per year. I have been told that the closest work around is to use the auto ordinate tool. This is a good start but unfortunately it details every possible point on the surface and when you add a hole or move features the ordinate cannot be re-jogged or cleaned up.Solid Works solves this by allowing the user to select the ordinate and then select a RE-JOG command. Cadkey did it by allowing the user t insert a new ordinate dimension and the scheme would update. I would propose that when you put down an ordinate scheme you
A component placed in an assembly using the "include" method can be easily changed to "assembled" using Edit definition.However, we would need the opposite case: Redefine "assembled" components to "included".And unfortunately that is not possible (see also the attached video). (function() { var wrapper = document.getElementById('lia-vid-6292725783001w894h540r796'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos)
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.6.02. What is the problem?The ECAD IDX PCB Place restriction Keep out only allows a digit value in depth setting (height). It is very time consuming to design and update many small keep outs for each airgap to the offsetting surroundings.3. Are you using a workaround? If yes, please describe it.Very time consuming to design and update many small keep outs with individual Depth value4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.MCAD drive and design the surroundings of a PBA and using Keep out features is a way to share the geometry with the ECAD Layout designer. My idea is to offset a surface-quilt from the surrounding diecast metal cavities, use as an inheritance skeleton surface into the PCB, and use the surface to cr
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?10.0.3.02. What is the problem?When creating for example a load in Creo Simulate, but also applicable anywhere, I often refer to a parameter instead of typing the number. When forgetting the exact name, I need to go back out and fint the parameter name. It would be more efficient if one would have a small icon next to the value field, as in the image, that is a dropdown to all parameters that can be selected.Alternatively, or as well, when starting to type a parameter name, it will show the available options, similar to a search field.3. Are you using a workaround? If yes, please describe it.Copy paste or try to remember.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Improve efficiency5. What impact does this problem currently have on your organization? (Number of users affected
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.7.0 2. What is the problem? Reference: Ticket #: 17094880 SPR#: 14927971 Article: 404190 We imported a baseline PCB into an ECAD assembly. This was a flex PCB that needed to get bent, so we added bends to get the routing needed. We are able to successfully show the flattened state and all components regenerate fine. HOWEVER, if we redefine a component and press OK (without making any changes), the component can no longer update properly when toggling between the flat and bent states! All we did was press OK!3. Are you using a workaround? If yes, please describe it.We are using two assemblies, a flat state and a bent state. This can introduce discrepancies and issues between the two assemblies, and a lot of extra work when trying to collaborate between the ECAD and MCAD teams.4. What is the use case for your organization? Describe ho
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?10.0.3.02. What is the problem?When analyzing the data from the Creo simulate result files of an analysis the format of the output files needs to be corrected. For example in the .res or .f01 files. When I have several measures, more than 5, the result files have a carriage return/new line in them after 5 datapoints. This makes it manually intensive to correct the format before I can continue analyzing the data in for example Excel.This is not new for Creo 10 and has been an unfortunate "heritage" for many years.3. Are you using a workaround? If yes, please describe it.I open the file in Notepad and manually remove the new line on every row before copying the data for analysis.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It would make it possible to simply copy/paste the data
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 7.0.8.0.2. What is the problem?Unable to use the "Feat Name" parameter in Creo Parametric for 2D or 3D annotation.3. Are you using a workaround? If yes, please describe it.No known work-around. Interested in any options that are available.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation."Feat Name" is an assembly-level parameter, so it is applied to different instances of the same component in an assembly. Once checked-in, the "Feat Name" value from the CAD is applied to the "Component Name" attribute of the CAD Doc object (when looking at the assembly structure). If a Design Part is linked to the CAD Doc, the same value will be propagated to the "Reference Designator" attribute on the Design Part. This is good for CAD and Windchill structure, but
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.7 2. What is the problem?There is no easy way to select copy geometry features3. Are you using a workaround? If yes, please describe it.I am using the find command to find the features4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I would like copy geometry features to fold out with the features that they contain like an external inheritance does. This: Does this: 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It would allow the user to pick copy geometry features easier (within the GUI)
When clicking the RMB on a Section within a Geometry Feature, allow the section to become a Sketch feature placed before the feature it was associated with. Then replace the geometry feature's Section with the newly created Sketch feature.This idea will allow references from once internal sketches (sections) to be accessed during new feature creation by making the sketch unhidden. Currently, section features, for the most part, are not accessible when they are created as internal sections.The other 3 options are already available; You can unlink an external sketch to make it an internal sectionYou can replace an internal section with a sketchYou can delete external sketches once it is unlinked in a feature while preserving the model.The only thing we cannot do is simply make the Section a Sketch with a single command.The work around is not pretty at all: Edit definition of the section and save it as a .sec fileCreate a sketch from the saved .sec file and re-associate it (an
A "snap line style": a line visible in the drawing but not printable.This line style should be useful for table lines, 2D Geometry, custom symbols BOM balloon notes...
Base component’s interface placements are not active on an inherited part.It would be very useful to access the interface placement of the base component.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.4.02. What is the problem?When using Annotate>Show Model Annotations in drawings, please add an option to filter out everything but the top level model (I don't want to see every annotation from every submodel).3. Are you using a workaround? If yes, please describe it.Nothing useful, it's a bit of a mess right now.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This is useful - saves time and minimizes errors on every single drawing that we do.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)A few hundred Creo users currently. The major gain is less errors when users pick the wrong annotation because they can't differentiate between them.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.2.02. What is the problem?While applying the insulation on pipe segment from Piping extension creo do not conside Fitting like elbows,tees, reducer etc, It only create the insulation around the pipe segment,3. Are you using a workaround? If yes, please describe it.The only woraround here is creating the insulation manually by offseting the solid surfaces of fittings , but where assembly is large manylly creating insultion is time taking process,4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We take turkey project of the energy secotor, where we need to route pipes, in this scenario applying insulation is comman practice, we use this too much in our design ,5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost prod
Please include detailed documentation such as screenshots, images or video. Along the lines of article CS378421 regarding an Allow List, we need a Block List capability.1. What product and version are you running?Creo Parametric 7.0.8.0, soon to be 9.0.5.02. What is the problem?We need to prevent users from accessing certain Windchill URLs from the embedded browser. It is not practical to maintain an Allow List.3. Are you using a workaround? If yes, please describe it.User education, which is not holding up well.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We have Multiple Windchill Clusters on a Load Balancing Router with Common Base URL. After many years with this setup, it is impractical for us to correct this from the Windchill implementation standpoint. If a Creo Parametric user Registers and Connects to the wrong Windchill URL, it corrupts their cach
Turning by milling We propose to create Creo Manufacturing functionality that will make it possible to process using the “Turning by milling” method.There is a need, especially in turning and milling, to organize processing using the “Turning by milling” method.This method is very important for our customers. To obtain scallops of optimal height, it is necessary to shift the center of the cutter tool relative to the axis of the workpiece.In other words, we need to ensure a offset of the cutter axis relative to the workpiece axis (Ew). We tried to do this using the 4X_LEAD_ANGLE angle, but we realized that the Ew offset and the 4X_LEAD_ANGLE angle are different and independent values. That is, it is impossible to obtain a certain offset Ew simply by changing the angle 4X_LEAD_ANGLE, and vice versa.Moreover, the contact point of the “END MILL” tool with values of 4X_LEAD_ANGLE is more than 1 deg.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?10.0.3.02. What is the problem?In viewing Creo simulate results I always have to change the legend values for better presentation value. When doing this, changing the legend value does not accept "carrige return" / enter button to accept the new legend value, only pressing somewhere on the screen. Please change so that changing the number and pressing enter button accepts the new legend value.3. Are you using a workaround? If yes, please describe it.No workaround. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Every time I want to take screenshots for documentations and presentations5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It adds some annoyance each time I need to show results.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 9.0.7.0 2. What is the problem? Reference ticket: 17231654Modelcheck includes checks that 'check' for spelling errors, lowercase letters, incorrect font...etc. However, they only work for notes and tables! They do not actually check for words in Dimension Text! Anyone can write anything and the system won't flag it! 3. Are you using a workaround? If yes, please describe it.Praying that no one makes mistakes when they enter text in dimensions! (not working!)4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It would fill a major gap in the modelcheck functionality for these checks. When we setup modelcheck to look for spelling mistakes, etc... it does what we expect it to do!5. What impact does this problem currently have on your organization? (Numb
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakehold Furniture (Design/Development)2. What version of Creo Parametric are you currently running?Creo 4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Easier use for the operator.4. What is the use case for your organization?No sure what this means?5. What business value would your suggestion represent for your organization?Ease or use / Increased productivity?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?We use Creo parameteric 8.0.9 in conjunction with Windchill 12.0.2.2. What is the problem?We often use the hole tables in the drawings for hole specifications. In most cases, several tables are created in order to achieve a clear assignment to the different views.We use alphanumeric identification to assign names. Unfortunately, the first hole in each of these tables is labeled "A1". Unique identification is therefore not possible when using multiple tables.Specifying a starting value for the naming would be very helpful here, as it would allow you to create unique designations.3. Are you using a workaround? If yes, please describe it.It is only possible to try to create the assignment of the hole table to the display view as accurately as possible. However, this is hardly possible for large drawings with a large number of holes and hole tables.4. What is the use case
Hi, Please add an option to include annotations (made in assemblies) in step AP242 export.Also add an option to exclude annotations from components in this assembly. Thanks in regards
There is currently no direct Toolkit API for accessing the Curves associated with a Cable. Access to the Curves is needed in order to do geometric operations with Cables. For example, determining the arc length location of "Clamp" Models along a Cable. Cable Curves are associated with Cable Segments. One can get information about Cable Segments using the ProCablesegmenInfo objects obtained via ProCablesegmentInfosGet() . These objects let one obtain Cable Location IDs, Points and Tangents via ProCablesegmentInfoPointsGet(). There is a back-door way to get the Curves by examining the ProCurves in Cable Segment Features and comparing them against the obtained Points and Tangents. This process is convoluted and requires one to sometimes rearrange the ProCurves since they are not necessarily in the right order. The idea is to create a new API that lets one obtain a properly-ordered list of ProCurve objects for a given ProCablesegmentInfo. The API would be something like "extern ProE
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. PCB design, computer and electronic device designWe are Design Automation Team.Our customers are our MCAD Mechanical designers, ECAD designers, product designers.2. What version of Creo Parametric are you currently running? Creo 9.0, and Creo 7.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Creo 9 supports to import ECAD IPC-2581 files, When Import ECAD silk screen data entitles as quilts, the 2D silk screen layer is under the 3D copper layers and cannot be seen properly. The Silk screen should on the top surface of the 3D copper layers and sold mask layers. Otherwise, it is hard to clearly see and validate the ECAD design. It defeats the propose to import ECAD files into Creo. To make this feature more useful and better, I think either the silk sc
We are trying to create a flat cable with a fixed length. Apparently we can't! How is this not part of basic functionality? https://www.ptc.com/en/support/article/CS131446
Generate a network curve location Id to location Id distance report. Connector CS Entry+----------Length?------+Loc_Id----Length?---+Loc_Id---Length?---++Entry CS Connector.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Our Industry is the manufacturer of machinery for complete bottling solutions like water bottle blowing machine, filling machine, labelling machine and shrink wrapping machine. 2. What version of Creo Parametric are you currently running?Creo Parametric 9.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.While saving a large assembly to another directory for designing a new variant of that machine, the assemblies and parts will be saved with the rename that we give. But the instances of the parts and their drawings are not created and saved. This takes lots of time wasting to create the instances again with rename and to do drafting again. The common solution given currently is to backup it and rename it. How is it possible for thousands of components in a machine? Another one solut
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.