Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 102. What is the problem?When measuring volume, the measurement value in Liters cannot be obtained directly.3. Are you using a workaround? If yes, please describe it.Option 1: create a Liter parameter, an analysis feature based on the measurement, and a placement relation with unit sensitivity. Creo performs unit conversions automatically.Option 2: Add the line "standard_unit length dm 0.1 m" to the units.sup file to define a new unit called "Decimeter" (dm).4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Allows to automatically receive a volume measurement in units of Liters. Very useful in BMX.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)The existing options are very inconvenien
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.4.02. What is the problem?We need higher quality display of motion envelopes.Refer to article C17311758.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Creo already has similar functionality in its STL export functionality. Being able to define the chord height would enable users to guide Creo to produce a smoother motion envelope that more closely represents the volume.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) More accurate and useful motion envelope model that can help users to avoid interferences.
1. What product and version are you running?We are currently working with Creo Parametric 7.0.11.0 and Windchill 12.0.2.11. 2. What is the problem? In addition to our own requirements, this idea also results from the PTC article CS289412. If you have already registered a Windchill server in Creo Parametric and logged in there, there is no way to adopt this login credentials in a Toolkit app and access Windchill data using the REST API.The workaround described below must be used for each additional Toolkit app.After a password change, which must be done every few months by all users in our company, this means that the new login credentials must be entered several times after the Creo start.This is very inconvenient and cumbersome for the users and does not meet with their understanding. In addition, extreme care must be taken when programming a login data query and saving the login credentials to ensure that no mistakes are made in terms of security. It would theref
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.52. What is the problem?TIFF 600 dpi can not be exported from 2d drawing3. Are you using a workaround? If yes, please describe it.Other CAD is using for export4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Some of our clients expect documentation in this specification5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)We have approximately 5000 users and it is difficult to estimate hours of lost productivity
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo 8.2. What is the problem?it would be nice to have a config pro option for the pattern BUNDLE DEFINITION uses. Something like:auto_bundle_name_pattern B## where the ## acts like creo schematics where the first bundle is B01if this config pro option isn't used, then use the default naming convention in creo 103. Are you using a workaround? If yes, please describe it.in creo 10 we would have to rename each bundle that is automatically made via the model tree.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.some bundles in harnesses we care about names whereas the other bundles we do not (bundles made of tape)5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)just speeding up sy
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CREO Parameteric 9.0.6.02. What is the problem?Would like to have 2 columns added to the Simp Rep Tab in the View Manager Window that automatically shows the Simplified Reps "Last Saved Date" and who it was "Last Saved By". Being able to sort those columns in ascending or descending order will be beneficial too. 3. Are you using a workaround? If yes, please describe it.Workaround is putting the initialization date and/or initials of the engineers that worked on it last in the Simp Rep Title, which takes away characters from describing what the Simplified Rep shows. I've also heard about the Description Column, but I have not used it extensively and my concern is new engineers would not be aware of it either and end up not using it or updating descriptions incorrectly.4. What is the use case for your organization? Describe how your idea would work in context o
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? WF4 to CREO82. What is the problem?The main problem is having the maximum dimensions of the piece for these reasons:1) I have to define the measurements of the blank to purchase.2) I want to define an automatic drawing procedure.3) I also want to have a cost price for the processing of the piece.I happen to have up to 100 parts to drawing and estimate.I need three numerical variables X Y Z that define the dimensions of the piece andother that definition its position in space referred to the main coordinate system (CSYS).3. Are you using a workaround? If yes, please describe it.Currently I draw an overall curve on the plane normal to the Z axis which mifrom two dimensions X and Y and then another curve on the plane normal to the X axis which gives me the Z dimension. Then through the relationships I create the parameters for the report withthe dimensions of the blank a
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo 7.0.9.02. What is the problem? When changing to a split quantity balloon to a custom balloon to support ISO standard balloons any split quantities are not kept. The initial balloon receives all the quantities minus the number of balloons for that component.3. Are you using a workaround? If yes, please describe it. Manual work to redistribute the quantities again.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. In one example it takes approximately 90 minutes to make this update due to the number of balloons and their locations on multiple sheets.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) Many users (200+) will spend probably an average of 20 to 30 minu
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? CREO PARAMETRIC 9.0.7.02. What is the problem? We have hand drawn wirelist schematics on a page of a cable drawing to show how a cable is hooked up. It is not a CREO schematic program it is only lines on a page depicting wires in a cable with connections to connectors on each end of a wire. There is text on the drawing that indicates wire numbers and signal/net name and AWG of wire. The text is not intelligently linked to the drawn lines depicting wires in the cable. I want to automatically pull off the information off of the drawing and determine from the drawn lines where the signal/net names go from point to point (connectors) from the graphical drawing. We currently cannot just pull off data from a CREO drawing like this and put the data in any kind of format like a table that represent the layout on the drawing. We als
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 102. What is the problem?Normally users open the part models from the assembly. ( Assembly- graphics screen- Open or Model tree open) . When user close the part, Creo session will never goes back to the assembly ( from where it opened from) instead it always show another model which is already open3. Are you using a workaround? If yes, please describe it.Of course we can look for the assembly but its annoying. Users expect when they close the model creo will show the assembly from which they opened seconds before. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This is happens always in Creo and this nice enhancement would be a time saving for every users around the world. Sometimes frustrating for everyday users5. What impact does this problem currently have on y
Sometimes we need blank the border lines of table, but for current functionality Line Display only can blank the internal lines of table, cannot blank the exterior border lines
The current ECAD MCAD Collaboration IDX support works best when the components are a part. However, our libraries are setup where the components are assemblies. This allows multiple benefits: Assembly can include multiple part sources that are allowable in our ERP system and allows the engineer to review each source to ensure it still works with the design As sources for components are disqualified/added, the librarian can do the same within the library assembly without affecting any higher level designs (disqualified parts can be hidden). Datums/Curves/ECAD data is added at the component assembly level and not at the part 'source' level. Some components from manufacturers just import as an assembly and work best that way That is why we have the components as an assembly. However, when we export idx files with components that are assemblies: We get a warning in the log "Could not find a suitable solid geometry for model <XXXXXXXX.ASM>" IDX and EDA geometry in the ecad t
With ModelCheck Interactive you can run ModelCheck on an assembly and the related sub components within that assembly. However, you need to go check each sub component drawing 1 by 1. Please add the ability the check drawings with same name for all levels of the assembly.
Please allow selecting, activating, and deactivating cross sections while in Mechanism mode. Today this is unavailable. The current workaround is: Activate a cross section Enter mechanism mode Run the analysis Save the analysis Leave mechanism mode Select a different cross section Re-enter mechanism mode Re-load the previously saved analysis Steps 4 - 8 could all be avoided if we could just select a different cross section while still in Mechanism mode.
Please update the Creo Save a Copy of Assembly command: Support for options related to objects declared for a Notebook (.lay) Clarify how Copy Drawings works by adding "with same same" The Save a Copy highlight selection is difficult to see and is not visible if object is hidden behind other parts. Please use the normal Creo selection highlight used elsewhere in Creo. Add "Configuration Queries" from the Model Tree Search to Save a Copy search. Add a "Declared to Notebook" to both searches. This will make it easier to Save a Copy of flexible assemblies that use ProProgram and/or Notebooks (.lay). Screenshots from Creo 4 M090.
In Creo simulate, While adding new Material from model properties, Material definition dialog box pops out of system screen when more information is given in that model. So that no scroll bar also, to see the information which is goes out of screen, It will be user friendly when the Scroll bar is introduced in the material definition box, Thank you.
Toolkit APIs ProSolidFacetsetVisit & ProFacetsetFacetVisit enable traverse FacetSet Features and associated Facets in a Creo Model. While Creo CAD itself has the capability to read/display FacetSet Features along with Colors, there is no suitable API to read the Color information off Facetsets/Facets in the Model. This is a critical requirement for Toolkit users who work with various types of geometry including Precise, Tessellation & Hybrid.
We have a need to use ProProductviewFormattedMdlnameExport() to export to Creo View specified child models of the current assembly while using different recipe files. ProProductviewFormattedMdlnameExport() lets one do an export of any part or assembly that is currently in memory. It allows one to specify the name and the directory of the exported Creo View file. A ProProductviewExportOptions object is also an input argument. It is used to specify the type of output (ed|edz|pvs|vpz). Currently the only way to specify that a recipe file other than the default ed|edz or pvs|pvz recipe file be used is via a config.pro option like "intf_out_pvs_recipe_file". Unfortunately, setting the config.pro option to point to a recipe file and then changing it again to point to a different recipe file does not work. I have implemented a workaround that involves pointing to a temporary recipe file that I overwrite as needed. Before calling ProProductviewFormattedMdlnameExport() I have to overwrit
It should be possible to create extrude, revolves, by existing curves, edges of surfaces. see the next example:
Hello! I created a pattern using OTK Java and FET. Now I need to exclude some of the elements of the pattern (just as is done with Creo). For example, I have the pattern created using Java OTK and FET: This is what I need: 1) disabling pattern elements. 2) the result that I need: Since I created this element using FET, I know that it has a certain structure, the elements of which perform certain functions. Therefore, I created the pattern without excluded elements and unloaded its tree into a XML-file.And then I did the same with the pattern with excluded elements.I compared two XML-files and they turned out to be the same.From this I concluded that OTK Java + FET cannot exclude pattern elements. Although this feature may be useful in some cases. Best Regards!
Suggest adding functionality that auto-populates a ZONE field in the revision block of a Creo drawing, similar to what is available in SolidWorks. This is illustrated at time 1:24 of the following Youtube video - https://www.youtube.com/watch?v=g76cjgGIT28 As illustrated in the video, when a drawing revision symbol is placed on the drawing, the ZONE field is automatically populated with the drawing zone where the symbol was placed. This functionality is currently not available in Creo Parametric.
It is possible to move an custom symbol horizontally in a drawing. It is just necessary to select the handle (see "1." in file "example1.png") and move it e.g. to the right (see file example1.png). In 3D (.prt/.asm) it is not possible. With "move" command in Context menu you can move the whole symbol, but the length of the auxiliary line will not be changed.
It is not possible to reference a user-defined symbol with an offset, e.g. to a dimension or something else, because the placement option "Offset" is not available. If I move e.g. a dimension, the already placed symbol remains. (see attachment examble.png)
Simplified reps in large assemblies can really help by allowing subsets of the models to pulled opened into session. Only one of the assembly simplified reps can be in session at once. If you are using different simplified reps on a single sheet this means that even moving your mouse across a drawing view can cause Creo to stop and reset the current simp rep in session to match that view then do it again as you move your mouse across another view. Currently I have users move the view they need to work on to a different sheet, do their work and move it back. This involves needing to change sheets several times slowing things down. Before that PTC's recommendation was to put each view on it's own sheet but that just isn't practical at times. I would like to be able to set views to "Inactive for Selection" to avoid this issue. To work on a particular view you would Activate it and then you could deactivate it again when done. A small icon or other notification of the Inactive state
I could have sworn I used to do this in the past but the PTC people reassured me it's never been utilized before. When creating a sketch and you want something to be constrained symmetrically about a center line you currently have to dimension the line endpoints/center points then add the constraints after (dimension A to C; constrain A,B,C). What I'm proposing you do is automatically add the symmetrical constraint to an item when creating a dimension based off a center line (dimension A,B,C; symmetrical constraint is created automatically).
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.