Recently active
Solidworks and Catia have had this for over 10 years. Get with it PTC, you presented this prior to Creo 4 release. 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. Medical manufacturing, Product Engineer 2. What product & version are you currently running? Creo 8 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Sweep an end mill along a 3d curve and properly represent the resultant geometry. I can program it in CNC, but I cannot show it in CAD, nor cad I render or simulate the proper geometry. 4. What is the use case for your organization? we do this all the time. 5. What business value would your suggestion represent for your organization? It should be obvious, we cannot show the proper part geometry across the platform. We cannot simulate it, render it, or describe in cad mod
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 9.0.6.0 2. What is the problem?When editing hatching in a drawing, for areas (like an ECAD Keep-Out), it uses the old menu manager system and not the newer ribbon in Creo 9 method that is used for section hatches. This is confusing our users who are expecting a consistent process for managing hatches.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The hatching mechanism and process would be consistent for all use-cases within Creo5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This is causing slow down, confusion and some users are not even attempting to edit the hatching for areas as it is difficult. All of our produc
1. Are you using a workaround?Yes, we have to go into GD&T advisor to make the updates2. What is the use case for your organization?Here is what the help documentation used to say: The semantic references that are associated with a general profile tolerance are automatically updated with every model change. This is what I want.3. What impact does this problem currently have on your organization?This is not "automatic" which means I need to train users on how to use it and make it work. Training is not fool proof. I want fool proof. Its confusing to users that sematic references automatically get updated when they create geometry but not when they add annotations.Describe the Problem In Creo 10 a new fantastic feature was introduced that has an overall surface profile collect up all of the sematic references that are not currently tied to another annotation and makes them a sematic reference of a overall surface profile note. https://support.ptc.com/help/creo/creo_pma/r10.0/u
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I work in collaboration with a design for manufacturing group. My task is to list some rules established in order to avoid some manufacturing problem when we design particularly in sheet metal. 2. What version of Creo Parametric are you currently running?I am currently running creo parametric 7.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.My goal was to automate sheet metal rules in creo parametric in order to have some errors or warnings displayed automatically when we don't respect rules established. I have already searched some sheet metal rules in model properties in the sheet metal module but the verification is manual through the window "model information" where we have design rule-violation check. I have also found the tool "check rule" in files>prepare after previousl
I am using WF5/Creo. The number of files/drawings to be opened at one time is 15. Is there a reason that you can't have more than this?Thanks,Also, when editing a weld symbol - it treats the window as a 16th window. I recieved an error message that I had to many windows open. Try closing a few. I had 15 windows of files open and when I closed one, I was able to edit the weld symbol. Make the weld symbol editing box not the same type of feature/structure so that you if you have the drawing open currently, you would not get an error and the window would open normally for editing.April 11, 2013: Beside the window for welding, I just found that if I wanted to add a symbol, that window counts for one of you 15 windows too. I wasn't paying attention to the text line and clicked on the symbol icon, and it wasn't doing anything but silently screaming at me that I have to many windows already open.Sept 11, 2013: Wanting to add a symbol with 15 windows open bit me again - couldn't figure out why
1. Are you using a workaround?Unavailable2. What is the use case for your organization?Multiple table cells can be selected and copied to different table cells.3. What impact does this problem currently have on your organization?The more contents you want to copy in a table and the more paste destinations you have, the more man hours it takes. Since it is possible to copy paste more than 3 pieces of the same content into more than 20 DRWs in a single operation, copy pasting one by one takes a lot of man hours. The corresponding effort for each subassembly is 0.5 hours more than previously used CAD. Since there are approximately 265 subassembly drawings for a product and the number of drawing sheets needs to be matched, 0.5h x 2 (average number of sheets in the subassembly) x 265 drawings =265h increase.Describe the Problem The contents of a single table cell can be copy pasted, but it cannot be copy pasted when multiple selections are made.The contents of a table are often used in colu
1. Are you using a workaround?no, I don't use any workarounds2. What is the use case for your organization?With our licenses we cannot use the "copy geometry" commands so we sometimes create external references and dependencies. Creo Parametric does not allow you to duplicate an assembly if dependencies are defined within it, so in this case we use the "Reference viewer" command only to view the dependencies of the children.3. What impact does this problem currently have on your organization?a few minutes, but repeating the command would be very appreciableDescribe the ProblemCurrently when I run the "Reference viewer" command, the program starts doing all its calculations and then displays all the references and dependencies, and if the assembly is complicated it takes a long time.What I suggest is to create a further command that gives the user the possibility to preset what he needs and then start the calculation.For example: I call this new command, the program opens the "Reference
1. Are you using a workaround?Yes - manual text entry / update (error prone!)2. What is the use case for your organization?Creation of "smart" documentation that updates automatically and elimination of out-of-date notes. 3. What impact does this problem currently have on your organization?Unknown; anecdotally, probably quite significant. Describe the Problem The software provides in the UI the capability to search the model database and return the list of results. However, this information is not available to be used for programmatically documenting or driving the design intent. For example, a user recently asked for a way to report how many parts are contained in an assembly (ref. thread - PARAMETER FOR NUMBER OF COMPONENTS PRESENT IN AN ASSEMBLY) The information can be obtained using the search tool. However, only a static annotation note can be manually generated with this. The proposal is a conceptual idea of a general feature that stores the search results in an accessible
1. Are you using a workaround?Currently, there is no direct PTC Toolkit API to get the tessellation of TAPE/MARKER Feature attached in Cable Harness2. What is the use case for your organization?We are using application to convert Creo data file to JT file format . Due to unavailability of any toolkit API to fetch the TAPE/MARKER tessellation , the conversion is not completed properly.3. What impact does this problem currently have on your organization?Not able to get the complete feature of Cable harness in JT File.Describe the ProblemProCableTessellationGet() does not give the tessellation for the TAPE/MARKER contain in the cable
1. Are you using a workaround?As for the pattern feature, if it is deleted once, then the feature parameter is created/changed, and then patterned again, it is reflected in the pattern all at once. However, repatterning often takes longer.2. What is the use case for your organization?Improved input efficiency for feature parameters. In particular, it is desirable that feature parameters such as patterned parts can be input and changed together. Please consider the following three improvement plans. *Methods other than the proposed three may be used. -improvement plans- (1) Apply to all by input/change to one model in the pattern. (2) Apply to all in the pattern by inputting and changing to the pattern feature itself. (3) Select multiple models to apply feature parameters to all of those selected in the batch input/change. 3. What impact does this problem currently have on your organization?The more components and the more pattern features, the more man hours it takes. For large
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo 8- 2. What is the problem?in the flexibility dialog of a Part or Assy, offer pre-defined states which change DIMS, FEATURES, PARAMETERS.. ETC similar to the VIEW MANAGER's ALL tab. 3. Are you using a workaround? If yes, please describe it.setting each component's flexibility in an assy by hand..4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Components or assys in an assembly which are flexed could easily have STATES or an ALL tab with pre-defined states we can use which set parameter, dims and features all at one time.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)not much currently, but could easily replace family tabled items in the future where you do not want the extra ins
1. Are you using a workaround?Yes, you can currently change the default orientation and then click on the saved orientations and then click on the default orientation.2. What is the use case for your organization?This idea would save some training and make it easier for users to use the product out of the box.3. What impact does this problem currently have on your organization?Users get confused because they don't see the part geometry that they are expecting. Saves some clicks.Describe the Problem If you have a CSYS way off in left field then when you open a part Creo opens centered on the default CSYS which may not be where the part geometry is. By allowing the part to be opened in the default orientation it would allow users to zoom in on the geometry for the part and then always open to that orientation.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.CAD business owner for SOMFY group2. What version of Creo Parametric are you currently running?Currently CREO7 and CREO9.0.2.0 in April3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.ISO 1302 roughness symbol is native in CREO9 ... but ISO1302 is canceled and replace by ISO219204. What is the use case for your organization?Roughness symbol is used in drawing and 3D5. What business value would your suggestion represent for your organization?The new symbol of ISO21920 precise if it's linear or surface roughness.and is going to replace old symbol(ISO1302) à (ISO21920) The new line is for linear roughness ; For surface roughness, il is a losange.We create the symbol in CREO7 ; The point is unwished ; there are some options below Ra1.6, but I don't found how insert a blank as optionCould
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? CREO Parametric 9.0.6.02. What is the problem? when changing model tree width or adding columsn this is done for ALL active models. this is not helpful as I don't want these model tree changes to be reflected in all model, only in the active model.3. Are you using a workaround? If yes, please describe it. no, not possible, unless keep changing model tree settings4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.e.g. in part models you may sometime need to see Feature # and Feature ID, but not for all models. sometime you may want to see windchill information for all componants in a specific assembly, but not in all assemblies in session. in CREO 9 this differentiation is not possible anymore (in CREO 4 this was)5.
The config.sup is for settings that users (or any other config.pro files) are not allowed to change in Creo and seems like a perfect place for corporate wide mapkeys to create standard processes/toolsets. In Creo 3 M060 as shown in the attached video, the config.sup will allow MANY mapkeys to exist in a Creo session but not let ANY of the mapkeys from the other config.pro files (e.g. a users config.pro) load into Creo. It would be way more flexible if the other config.pro mapkeys would load into session as well. Where two mapkeys have the same name, always use the config.sup mapkey. General user config.pro files often tend to get tons old settings and mapkeys built up over time if edited from Creo so superseding user mapkeys where a naming conflict exists help admins keep users using the latest and greatest processes/mapkeys as things inevitably change.Several good ideas were shared in Re: Corporate Mapkeys - Superseding User Mapkeys about how to accomplish this but currently require a
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Cro 9.0.7.02. What is the problem?Unable to export ecad context data from drawing when exporting a pdf file3. Are you using a workaround? If yes, please describe it. No using old school dxf data from Siemens Xpdedtion4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. We would use this to better/faster and more arcuate PCB assembly drawings.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)We would not be taking advantage of the new capabilities within Creo 9 for ecad context data thus maintaining the current slow process. We could save 10 - 20 per drawing in time spent the current way.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. General engineering. Senior design engineer.2. What version of Creo Parametric are you currently running?9.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Currently there is no way to show units in dual dimensions. Suffix can partially solve this problem but only on main dimension. Workaround is adding attaching note to dimension with units or just provide general note in drawing. Also different precision for primary and secondary units in options. 4. What is the use case for your organization? Making drawings with dual dimensioning.5. What business value would your suggestion represent for your organization? Shortens work time.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo Parametric 102. What is the problem? Counterintuitive Flat Patterns in DrawingsI have used Creo for years, learned 3D modeling on it 20 years ago, and was an active user for the next 10 years. Then switched jobs and have been away an equal number of years. In my newest job we are switching from Inventor to Creo, and I couldn't be happier about it. That said we have many new members who have never used Creo or only sporadically used it in the past. A colleague and I just spent the last 20 minutes trying to figure out the correct way to add a flat pattern to a drawing. We finally stumbled upon a helpful youtube video that went over the create flat pattern command, and then the create flat rep command. The flat rep command only does half the job, though. What is missing is that to actually differentiate the new flat pattern rep with the master rep is
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0.5.0 with Windchill 12.02. What is the problem?There are some situations where Checkout on the Fly pops up more than once. It can happen during large assembly regenerations, but notably happens when saving a backup to disk while modelcheck has things to do on save. In these cases, especially when combined with Modelcheck, you can get Checkout on the Fly, one by one, for every object in the assembly (because it's becoming "modified in session"). One - at - a - time. When this happens you can't even interrupt the process. You're stuck in it for the long haul, or you exit with the task manager. It needs to wait, see what all is affected by the entire operation, THEN present you with the checkout options. (function() { var wrapper = document.getElementById('lia-vid-6352472817112w996h540r373'); var videoEl = wrapper ? wrapper
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.4.02. What is the problem?Drawing/Model detail option setting - 'datum_target_area_multiply_sign' set to "capital_x" (default) - not in conformance with ASME Y14.5. ASME Y14.5 states that, in the Use of "X" to Indicate "By", a space is to come before and after the X. The Creo solution for the "capital_x" option value does not provide such spaces for the target area types of Rectangle and None. This misalignment also exists pre-Creo 9 - a detail option to change the display doesn't exist, but the standard display for Rectangle and None target area types does not include spaces before and after the "X" symbol.3. Are you using a workaround? If yes, please describe it.Workaround could be to manually generate local note to supplement symbol display in order to get full specification to align with ASME.4. What is the use case for your or
I just want to be able to undo anything I just did in any area of Creo (like every other program I have ever used). Details: Currently it works really well (as it is supposed to) in Sketcher mode but other than that it is closer to a joke. First day I train a new person to ProE/Creo I tell them save often and don't expect the undo command to work (when it does work it is like winning the lotto). I go to move multiple draft entities but because it may be a short line I selected Creo assumes that I wanted the endpoint and it ends up extending the line in an impossible way to undo (even when I still have it selected I cannot unselect it...it is too late)...I cannot undo! I think we could all add our own examples of not being able to undo in various areas of Creo, so feel free to add some more in the comments area. Please make undo work in all areas of Creo.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. Marine 2. What version of Creo Parametric are you currently running?Creo 5 moving to 8 soon 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Ease of use in cabling UI It is frustrating when launching a new session of creo, i go to route cables and they get routed outside existing bundles. I have to cancel out and go to the SETUP and throw that switch every time i start a session. Can you move it to the ROUTE CABLES dialog? 4. What is the use case for your organization?removing wasted time5. What business value would your suggestion represent for your organization?remove wasted time
Cabling Location points are hard to see (See Location Points.png). The Edit Definition look of location points were updated with Creo 7 and that looks really good (See Creo 7 Location Points.png). This request is to extend the location point visibility function to make the default points more visible as well and make this the same for all location points. Possibly make edit vs the default points highlight in a different manner for distinction.
1. What product and version are you running?Creo Parametric 9.0.7.02. What is the problem?It can be tedious and repetitive to select surfaces to add to an annotation's semantic references to support Model Based design. It would be helpful if there were tools to create an manage "Surface Selection Sets" which could exist as a Custom Group to be able to be selected while defining an annotation or applying model color, etc...There is a related selection tool improvement request which will help, but a "Surface Selection Set" capability would also be a good complimentary capability.3. Are you using a workaround? If yes, please describe it.No, just many many clicks.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.For a relatively small design I needed to select 267 surfaces to include a surface treatment note. Then I will have to click that again to apply a special profile tole
From time time to time, especially when working with large assemblies, there is a need for a tool in order to quickly investigate the assembly - in term of performance. those will include the possibility to some of the main point of interest such as: Open Performance Open Summary Details of the Open Document File Previous Version References Modified on OpenDisplay Performance Graphics Triangles Shaded Image Quality Display Speed Appearance Components Far from OriginRegen Performance Regen Data Unavailable Regen Report Mates Assembly Regen Report this tool will enable the user to identify issues quickly and improve software usage and satisfaction.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.