Recently active
1. Describe the Problem Please add the ability to toggle between Line and Arc while creating geometry in a Sketch in a Model. This function already exists while sketching in a drawing by pressing the S key. This is a feature already available in other Modelers. 2. Are you using a workaround?I have not found a work around3. What is the use case for your organization?This would increase sketching efficiency by saving mouse movements and mouse clicks.4. What impact does this problem currently have on your organization?Slows down modeling time and efficiency.
1. Describe the ProblemCurrently, there is no warning mechanism in Creo to alert users when they are about to save a model in a newer version of the software. This can result in unintended compatibility issues, as files saved in a newer version of Creo cannot be opened in older versions. This often leads to accidental revision upgrades, which disrupt collaboration in teams where members may still be using earlier versions of the software. The lack of such a warning increases the risk of workflow interruptions, data loss, and time-consuming rework to recreate or convert models for backward compatibility. I propose an option to warn users they are about to save the current model file in a new version of Creo making it non backward compatible in prior versions. This would prevent accidental unintended upgrade of Creo revision. 2. Are you using a workaround?No3. What is the use case for your organization?Have multiple versions of creo and accidentally saved a file and now st
1. Describe the ProblemFor the post-processing purposes within Creo Flow Analysis, it would be very appreciate to enable calculation of averaged and mass averaged report for velocity (so, similar as for total pressure). This option should be available either through XYPlot either/and through interface output property. 2. Are you using a workaround?The workaround for averaged velocity is to manually calculate velocity via simple equation: v=Q/A (Q being the volumetric flow rate and A being the section area), No workaround for mass averaged velocity.3. What is the use case for your organization?Working in hydraulic company, CFD simulations refer to internal flow. During the post-processing of simulation results, it is essentially for us to know averaged and mass averaged velocity --> this data is crucial to calculate "efficiency" of our components.4. What impact does this problem currently have on your organization?Use workaround (explained above) or even using another CFD tool.
1. Describe the Problem Reference: Ticket - 17604467 Article - CS433589 We are trying to create a mapkey that changes the layer state of a specific view in the drawing. There is no way to select a view, using a mapkey. The code used for selecting the view in the trail file is:~ RButtonArm `main_dlg_cur` `proe_win` proe_win` 9 914 402 0 4 1317 774 1920 1080 29699656~ Move `main_dlg_cur` `proe_win` 9 914 402 0 4 1317 774 1920 1080 29699670~ Timer `` `` `popupMenuRMBTimerCB`~ RButtonDisarm `main_dlg_cur` `proe_win` 9 914 402 0 256 1317 774 1920 1080 29700143~ Exit `main_dlg_cur` `proe_win` 9 914 402 0 4 1317 774 1920 1080 29700144 This code is not repeatable in new sessions. 2. Are you using a workaround?No. Our mapkey does not have the needed functionality and automation that it requires. 3. What is the use case for your organization?We are automating a PCB drawing automation mapkey. Most of the sheets and the drawing views will have the keep-outs hid
1. Describe the ProblemWhen working with dimensions in Creo, if a dimension is weak and the user finds its value acceptable (e.g., “10”), clicking the dimension and pressing Enter or retyping the same value does not automatically convert it to a strong dimension. The only workaround is to manually right-click the dimension and explicitly make it strong, adding unnecessary steps to the workflow and increasing the risk of errors if this step is overlooked.2. Are you using a workaround?No3. What is the use case for your organization?This results in the dimension remaining weak and susceptible to unintended changes during model updates. The only workaround is to manually right-click the dimension and explicitly make it strong, adding unnecessary steps to the workflow and increasing the risk of errors if this step is overlooked.4. What impact does this problem currently have on your organization?Hard to demonstrate
1. Describe the ProblemHaving the wireframe display of the same color as the shading color of the bodies or quilt surfaces , allows me to quickly check for differences or interferences between the bodies. Thank !!2. Are you using a workaround?no3. What is the use case for your organization?quickly check for differences or interferences between the bodies4. What impact does this problem currently have on your organization?speed up the work
1. Describe the Problemthink about it. When we model we are always dealing with dimensions. I wish the display of dimensions be easier on the eyes and should be zoom aware and push the dimensions away from each other and be in my view of context at all times. often these dimensions have some arbitrary placement and sometimes are lost in space I have to zoom out so far. since 90 percent of actions involve dimensions, please modernize the look and feel and offer better view performance and clickable areas. By all means make sure when editing any feature that the dimensions appear on screen in middle where I can see them. Right now their position seems to not be so easy for the user. Font size, etc all should be revised. 2. Are you using a workaround?No3. What is the use case for your organization?Using dimensions is something we all do. Should be enhanced I find their color and clutter to be clumsy at best.4. What impact does this problem currently have on your organizatio
1. Describe the problem Currently, the split function can only specify 1 body and 1 face. So, for many split operations, I have to work multiple times. Please add a function that can split 1 body into multiple faces, or split multiple bodies into 1 face. For example, to split a cuboid into 4 parts using 2 faces, I have to go through 3 operations. 2. Are you using a workaround?No 3. What is the use case for your organization? I was creating a quilt to measure the internal volume of a water bottle, but if there are open parts, I can't measure it, so I felt the need for this function while splitting to check if there are open parts. 4. What impact does this problem currently have on your organization?Since I have to split one by one, the work speed is slowing down. Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- 1. 문제를 설명하세요 현재 분할 기능은 바디 1개와 면 1개만 지정이 가능합니
1. Describe the ProblemMore often than not, a decent looking generative design result cannot converge itself to brep geometry. Which requires patching and rework. Demos nice on certain parts, others fail. 2. Are you using a workaround?No. Make it more robust and fault tolerant. Use AI. The last feature of the generative hybrid has cuts in odd places and can be deleted. Rework and retry and giving up.3. What is the use case for your organization?Demonstrations of the power of using generative design models as real geometry. I wish there were a more robust rebuild of the hybrid model.4. What impact does this problem currently have on your organization?Being careful to never demonstrate this to a customer on models where it fails, as they want to use the hybrid model. I have to explain that the result is often just a suggestion and you should remodel the part using the hybrid as a guide. Which is impossible if it cannot converge a hybrid.
1. Describe the ProblemPlease do something about the little selection window popup for appearance color selection. Often times it’s so small I can’t find it and it’s hidden from me and always upper right corner of my large desktop. 2. Are you using a workaround?Enhance this workflow so selection widget is more helpful than just an ok or cancel. Probably could remove it completely.3. What is the use case for your organization?Mileage of moving my mouse around and being tricked my selection was made but it lost canceling pop up by accident.4. What impact does this problem currently have on your organization?Huge. Cumbersome UI, Looks like nobody put thought into its design. It’s never changed and is old and should be enhanced since we all like colorful models.
1. Describe the ProblemI stare at creo user interface all day long and I find the UI outdated and reminiscent of windows xp. The menu manager still is required for basic models to drawing functionality and people ask me if this is a dead product. It’s very hard to defend the software with the UI looking so old and cumbersome. I’ve read other posts and see this has gone unanswered. I want the ui to be attractive and modern and sleek and not in my way all the time. I’ve seen a preview of this at a usability test years ago. 2. Are you using a workaround?OnShape, Apologies, Making excuses it will get better. Mapkeys and UI tweaks.3. What is the use case for your organization?Customers want Creo UI stuff fixed and finished not new features. Too cumbersome and I have to explain and apologize for UI and hidden Easter eggs. Get rid of menu manager and pops.4. What impact does this problem currently have on your organization?Huge. Can’t sell creo when it looks outdated with ui th
1. Describe the ProblemIf Creo-Parametric allows you to set the BOLD / Italic on individual characters, then there should be an API to read them for each characters or at least by grouping the characters of Mixed style. 2. Are you using a workaround?No, there is no workaround to get the mixed style (Bold/ Italic ) from the text style.3. What is the use case for your organization?We are reading the style (Bold/Italic) of the Text and applying the same style (Bold/Italic) to the text in our application, so that user see the correct Text style in our application4. What impact does this problem currently have on your organization?Since there is no API to retrieve the Mixed style of individual characters, Mixed style text strings are rendered using single Font which creates inconsistency with Creo Parametric visualization
Oftentimes when importing a model from a vendor, it will come across as an assembly with numerous parts that do not match our standard naming conventions, and are not really needed to integrate their product with ours. I typically spend a lot of time "shrinkwrapping" such assemblies down to one part, without any interior detail, to avoid having to load all the original components into our PDM system individually. The shrinkwrapped part with less detail may also offer better performance. At times though, it may be desirable to retain all the original detail, but still not have to manage numerous additional part files for the subcomponents. Now that Creo 7 has introduced multi-body parts, I would like to be able to import an assembly as multiple bodies of one part, rather than multiple parts of an assembly.
The table functionality in 3D introduced with Creo 11 opens a lot of opportunities in regards to MBD. We are missing the feature to designate a certain cell value as control characteristics for a selected referenced object to publish the information to Windchill and use it further in Process Plans as it is possible with other Annotation Features in 3D.Other Annotations:No option for Tables or Table Cells:
1. Describe the ProblemCreo Material *.Mtl file name not accepting Special characteristic. Example :- STD 411-0001 PA66-GF15%-1.My request is Creo Should Accepted Mtl file name with Special Characteristic. 2. Are you using a workaround?Renamed like tike this "STD_411_0001_ABS_1"3. What is the use case for your organization?Name give more information to user4. What impact does this problem currently have on your organization?2000 users
1. Describe the ProblemWe would like to have a functionality in creo to find certain components in assemblies by given distances. The command should sound e.g. like, "Please creo, show me all "floating" objects in my assembly".While "floating" means a distance of e.g. 0 or 0.1 mm or greater than XY to any next component, Following picture with a primitive example should be comprehensive: The green component has a distance of greater than 0 to all other components in the assy. All other parts are tangent (coincident) or penetrating the housing. My idea should reactivate that one:https://community.ptc.com/t5/Creo-Parametric-Ideas/Improve-the-SEARCH-FIND-tool-to-find-components-with-additional/idi-p/458025Sadly, the original idea was archived.2. Are you using a workaround?As existing functionality does not deliver quick and complete results (Pairs clearance, global clearance, Search tool...), some of our users found a workaround in CCX-module (clearance and creepage
1. Describe the Problem 板金に変換して曲げたモデルの場合、自動的に面が分割されてしまうため、統一ができず、結果的に画像は1面にしか貼り付けられなくなってしまいます。 Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- If the model is converted to sheet metal and then bent, the faces are automatically divided, making it impossible to unify them, and as a result, the image can only be attached to one face. 2. Are you using a workaround?No3. What is the use case for your organization?When attaching an image to a part bent after sheet metal to attach a label4. What impact does this problem currently have on your organization?The 3D reproduction of the actual product is not perfect.
1. Describe the ProblemIt's only possible to erase or modify the initial relations but it's not possible to modify/erase the post regeneration relations 2. Are you using a workaround?We create a Real Number parameter DATE_POST_REL_PRT_ACTUAL with the value 20240203.000000 (which is the date of the actual configuration) by ModelCHECK, if it is not available. In the .mcs file there are to lists which have the possible values inside ###LISTS STD_USER_LIST_FILE text/error_post_rel_prt.txt STD_USER_LIST_FILE text/error_post_rel_asm.txt These two text files are located in the text folder of the ModleCHECK configuration files. Inside the error_post_rel_prt.txt file there is only one line LIST_ERROR_POST_REL_PRT Use Mapkey uspr to update post relations The same at the error_post_rel_asm.txt LIST_ERROR_POST_REL_ASM Use Mapkey usar to update post relations In the .mcs file I have this for parts #Additional parameters for post relations check PRT_PARAMETER DATE_POST_REL_PRT_ACTUAL REAL EQ 20
1. Describe the ProblemI’ve created a model with over 1 million components while the performance is quite good as shading, It is extremely slow when painting and highlighting all the edges. Many of the bottlenecks in edge visualization—such as geometric calculations and hidden line removal—are inherently parallelizable and could benefit greatly from GPU-optimized SIMD operations. Here’s how this could work: How SIMD on GPUs Can Accelerate Edge Rendering 1. Parallel Processing of Edges• With SIMD, groups of edges (or even multiple vertices within edges) can be processed simultaneously in parallel on the GPU. Tasks like:• Edge visibility testing (z-buffer checks).• Crease angle calculations for highlighting sharp edges.• Silhouette determination for edge lines.• Instead of looping through edges serially on the CPU, thousands of edges can be processed at once using GPU SIMD pipelines.2. Hidden Line Removal• GPUs can leverage SIMD for ray-based visibility testing, where mult
References: Ticket - 15684231 SPR - 7847602 Article - https://www.ptc.com/en/support/article/CS296066 We have an instructions for users in an annotation which shows a parameter value, driven by a relation. When we modify the parametric information and regenerate, the annotation is not updating! Support says we need to manually repaint or move the geometry around for it to work. Please fix as this is for a top-down skeleton for dozens of engineers, and the process should be seamless. Users are going to keep on getting hung up with the wrong instructions shown in the annotation. Thanks!
1. Describe the ProblemDesign requires information on surroundings/interfaces to make sure form, fit and function of products. The legacy method to genereate massive point clouds and utilize them on product design is not really supported optimally at Creo Parametric. The Reverse Engineering Extension (REX) exist, but it is a dedicated tool for those, who want to crate surfaces based on scanned data. For general engineerig purpoces, where one just wants to use scanned points as rough surroundings to the design, the REX approach is a overkill. The ability to put stationary images to backround of Creo Parametric design has some value, but positioning those photos to 3D is sometimes a tideous task, that requires time and effort.2. Are you using a workaround?Sketchbook and ruler, stationary photos and maby videos, that are not connected to design. Currently there is some applications and mobile devices, that allow scanning 3D. The data from these applications are of intrest, parti
1. Describe the ProblemWant to be able to measure the distance something is exploded , when in 3d2. Are you using a workaround?Currently have to create a 2d drawing with the explode turned on, to get a measurement of the exploded view.3. What is the use case for your organization?When making a Mold Design, we use the explode function to quickly move the moving components around. These are always moved with accurate dimensions keyed in. Not just randomly slideing the arrows around. If we want to measure how far things were exploded there is no way to do this in 3d. We currently have to make a 2d drawing (with explode turned on) to measure the exploded4. What impact does this problem currently have on your organization?We have over 20 users that this effects. It wastes time as we now have to make 2d drawings just to get a simple measurement we want in 3d. With the push of MBD and no more 2d drawings this is becoming even more of an issue.
1. Describe the ProblemWe want to make a base enginnering model, along with a manufacturing part that is linked to the base engineering model. When doing a Merge Inheritance of the base engineering part, It would be nice to have all MBD dimensions, transfer over into the Merge Inheritance manufacturing part. Currently this does not work. With the push for more MBD enhancements, this seems like a big one. 2. Are you using a workaround?No work around that I am aware of3. What is the use case for your organization?With our company wide push to go paperless and use MBD this would be VERY useful.4. What impact does this problem currently have on your organization?We would have to dimension things twice. Also add notes Twice.
1. Describe the ProblemAllow the model tree display filter to not show offset line in the model tree of an assembly.2. Are you using a workaround?there is no work around.3. What is the use case for your organization?na4. What impact does this problem currently have on your organization?excessive scrolling in the model tree window
1. Describe the ProblemCase - 17544648Article - 430230Patterns for datum features only allow general option pattern type. There is no way for datums to change so they should be defaulting to identical not general.2. Are you using a workaround?Only able to use General patterns3. What is the use case for your organization?patterns of points/axis/coordinate systems often are needed4. What impact does this problem currently have on your organization?large patterns of datums take a very long time to regenerate.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.