Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.7.0 - Using DEX (Design Exploration Xtension)2. What is the problem?A limitation of DEX is that it applies to the session, not the parts / assembly. I see that as an advantage for most things (DEX is designed as an ad-hoc, trial-and-error environment to explore design options as you guys describe it - and having everthing save within the .tmu session is great at doing that). But a downside is that you may commit to a design option and then work away on your parts and assemblies for weeks after that, only to realize that one of your other concepts from DEX is now of interest. I can open an old .tmu no problem, but it is a snapshot of what the model looked like back then (hasn't accounted for the weeks of work I've done post-DEX. If there was a way to open a newer version of a model and an old DEX session and tell it to try and reapply those features to your new
Up until a couple years ago, modeled threads were a serious taboo in CAD. They were unnecessary, used processor power and bogged down large models.With the rise in 3D printing though, there is a definite need for modeled threads and Creo is awful at doing it. The helical sweep feature is so klunky, unintuitive and onerous to use, and result is an unfinished thread with no options for lead in or thread end.PTC please make an easy to use thread option for Creo that incorporates all of the nuances of threading operations.
Hello,I'm a CAD Admin (Creo 8.0.1.0) and facing a problem with ISO Welding symbols inside PTC's symbols library (located inside Creo Parametric installation directory). These ISO Welding symbols are way too long and cannot be changed / varied manually to shorten their horizontal line. In populated drawings - these symbols 'steal the show' due to their (too) large size. I opened a customer service call (CS16231214 - https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=16231214), and, in response, was advised to open an enhancement request. My pleading request... Please shorten the horizontal line of all ISO welding symbols (iso_fillet, combine, etc.) or at least give us the option to shorten it via Customization Options. Regards and Salutation
** Duplicate of (https://community.ptc.com/t5/Creo-Parametric-Ideas/Enable-Hatch-Editing-on-3D-Zone-Sections/idi-p/452695) as that thread was archived, despite being the only sensible ""solution"" (in the biggest air-quotes I can muster) on the following support article about the lack of functionality in which PTC believe including the most basic of features not part of their job (https://www.ptc.com/en/support/article/CS203613) Maybe this time they will actually consider fixing this ropey mess of a program. 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Sustainable Electricity and Power distribution2. What version of Creo Parametric are you currently running?8.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Read title. Changing cross hatching is a basic feature when working with a section view. When employing a zone sectio
1. Describe the ProblemHello,Since Creo8, it's no more possible for Publish Geometry features to be placed exactly at the "Insert Here" button in Creo Parametric.We are using a hidden option to allow to create Publish Geometry features in the model tree.create_publish_geom_in_footer yesThis Idea to ask to officialise this option for future releases of Creo Parametric. The option works with Creo 11.0.3All config.pro options Creo Parametric 9.0 – CreoSite Best regards,Nicolas2. Are you using a workaround?Using the hidden option: create_publish_geom_in_footer yes3. What is the use case for your organization?Need to insert public geometry not only at the end of the conception4. What impact does this problem currently have on your organization?Avoid extracting the feature from the footer
1. What product and version are you running? We are currently working with Creo Parametric 7.0.12.0. 2. What is the problem? According to the PTC article CS323813, the C++ standards C++17 and C++20 are currently not officially supported, only C++14. Here's a list of some C++ features that can't be used today: C++17 Features Structured Bindings: Allows the decomposition of objects into their components, simplifying variable declarations. std::optional: For representing optional values, similar to "Nullable" types in other languages. Inline Variables: Solve the issue of multiple definitions across different translation units. std::variant and std::any: Type-safe unions for storing values of different types. If and Switch with Initializers: Enables the declaration of a variable within the condition of if and switch statements. Fold Expressions: For more elegant handling of variadic templates. Filesystem Library: Introduction of a standardized API for working with file systems. C+
Hi, Would be nice and practical if you add the option "Show" and "Hide" to all bodies, quilts by right-clicking on the category (bodies and quilts categories as I marked with a yellow arrow)? At the moment this is only possible at the bodies/quilts level.
1. Describe the ProblemSetup the corner relief in model properties of Sheetmetal start parts for corner relief, the default setting of the Origin from Corner Reliefs from "Corner Point" to "Bend Lines Intersection" 2. Are you using a workaround?Generate a Mapkey,3. What is the use case for your organization?want to standardized, so all users will have the same the Croner relief, if users will need to change, they will change manually. What we have today is not good for us.4. What impact does this problem currently have on your organization?We want that all users will use the same type of corner relief. I succeeded to define the Bend relief as we want.
1. Describe the ProblemSketched features should always be dimensioned only to sketch reference even also when reference is singular as coordinate system or point on sketch plane not to other skethed items. When having sketch reference from 2 items like planes dimensions are correctly created. 2. Are you using a workaround?Only workaround is to add dimensioning manually. Note there can be tens of items to be manually dimensioned. This has to be all the times new item is added to sketch.3. What is the use case for your organization?We not get the design proposal from the simulation models and then it is fastest way to just project the points from the simulation model, but those are temporaray files so projection references are then deleted.4. What impact does this problem currently have on your organization?Extra work due to this lack of basic functionality can be 10% of worktime. There are multible simulation rounds during project where sketches need to be updated.
1. Describe the Problem Reference: Ticket: C17727367 Articles: CS439490 and CS36275 There is no method within Creo to simply select a custom symbol and have it 'update' to the latest standard. The issue is that once a symbol is loaded into a drawing, it stores that symbol internally, without a link to allow it to be updated. Once an update to a company standard symbol is deployed, there isn't an easy solution to updating the current ones, or any drawing created from a save-as. 2. Are you using a workaround?The two articles list a very convoluted workaround. The watered down version, is that the admin needs to make sure the .# extension of the updated symbol is higher than the old one. The user then needs to manually browse to the symbols folder and 'add' the symbol to the drawing. At that point, it will prompt the user to update the other symbols and then the user can select yes and delete the new symbol. This even includes custom bom balloon symbols. The go
1. Describe the ProblemWhen you export a BOM to a table in Creo, there's currently no way to ignore a "phantom" assembly. The only options are Flat/Recursive for the entire BOM, or manually select individual assemblies to make Flat/Recursive. There should be some way to ignore a "Phantom" assembly, but still include all the child parts as part of a Flat BOM.2. Are you using a workaround?There's no good workaround. Currently I am manually assigning "Flat/Recursive" for a dozen top level assemblies inside a BOM with several hundred parts. It's kind of a nightmare.3. What is the use case for your organization?We have very complex assemblies that are structured in multiple levels. (Level 1 = sheet metal frame, Level 2 = Level 1 + circuit breakers, Level 3 = Level 2 + wiring, etc.) There's currently no good way to export all purchased parts and assemblies in a Flat BOM structure from the top level.4. What impact does this problem currently have on your organization?Many, many hours of tweak
1. Describe the ProblemI would like the Measurement tool to be able to display multiple units at the same time. For me this almost exclusively applies to IN & mm, but some people like to work in IN & FT, or IN & CM, etc. As shown in the picture below, I suggest augmenting the current Units option with check marks to generate a list of measurements. In my case, that would be 2 measurements, but it could be more depending on the use case. Being able to specify precision (# of decimal places) is also useful for reducing visual clutter. Suggested Measure Tool Improvement2. Are you using a workaround?Currently I take a measurement, then click Options, then click Units, then scroll & click on mm, then click Okay. This isn't a workaround, but it is 4 extra clicks and some visual searching that has to be done multiple times in a given part. Depending on the number of metric parts in the assembly, sometimes I change the units of the assembly to metric, work on those parts,
Provide an API to connect the existing\already opened Creo View session so that I can do some operations. We do not have the option to connect to windchill from Creo view. But we can load files from windchill with "Open in Creo view" action. Once the file loaded into Creo view, let allow the program to connect that creo view session and do some operations. This is possible in Creo Parametric but a limitation in Creo view.
A website opened by clicking a URL hyperlink on a Creo Parametric embedded browser opens a small child window with no address bar. I'm using Creo with windows_browser_type chromium_browser. To meet modern security standards the Creo Parametric application should provide the child window with a location/address bar.
Please add Auto Round for sheetmetal parts and assembly as it is possible for solid parts.
Is there notification/listener function available for mouse events such as single click, double, right mouse click on Creo graphics window in TOOLKIT?
Would like the capability to disable the user from being able to select washers for certain types of screws in Intelligent Fastener Extension (IFX). For example we use Self-tapping round washer head family screws and the washer is built into the head, so we don't want the user adding a washer. Would like some kind of option that you can add to the .dat file for the screw to signify that a washer should not be allowed to be selected.
Ability to hide components in detail view
I want to know the type of variable text set in Symbol Definition Attributes of symbol instance through Toolkit. I could only find APIs related to set and get variable text of symbol instance using APIs ProDtlsyminstdataVartextsSet(), ProDtlsyminstdataVartextsCollect(), and ProDtlvartextDataGet(). However, I don’t see any API to query the type of variable text set. This is required in some cases if I want to compare the old symbol with any new symbol where i have changed the type from integer to text.
STEP files should gradually be improved to try to convey common mechanisms that most CAD packages could translate between themselves, so that when exporting a STEP file with mechanisms defined, the final recipients of the file could eventually be able to use the mechanisms simulations according to the degree of freedom available. Also, it would facilitate when importing neutral file formats of an assembly, if we could read automatically the constraints and limits available. It's a long term goal, since the format is not PTC proprietary, but this goal should be achieved the sooner the possible.
There should be a toolkit API, to get the Zoom and Pan state/matrix for Combined State without disturbing the Graphics/View.
Now, In Windchill, we can export only the list of folders and files available under a specific folder. But If PTC can provide option to export even the files under the subfolders, it will be easy to list down the folder structure of the whole Product design, for Audit purpose as well as for various usage.
Toolkit should support 2D drawing conversion from Creo Elements Direct with option: drawing associative with model. Currently, the Pro2dImportMdlnameCreate() imports 2D data only. There is no API to import 3D model with the drawing through option "drawing associative with model"
In drawing and MBD: Allow to change a created dimension to change into a reference dimension, so place the dimension between (), via a check box. Doing so you are able to switch between them.
For in the context of the assembly design wirkflows: In creo when you want to extrude up to a surface of another part there should be the possibility to do this via the blind option, picking the up to surface of the other part and that creo then fills in the rigth value for the blind depth. In this case unwanted external references can be avoided. Nowadays we have to measure this value and enter it for the blind depth. Implement above workflow for all items where values have to be entered for example also for offset datum planes
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.