Recently active
Have a fully customizable Marking Menu available in all areas of the software. Frequently used commands like views should be accessable from a marking menu, not just from the Ribbon or Quick access toolbar. It is a far quicker way to access your frequently used commands. Watch a Maya or Alias user blaze though their tasks and you will see why. Even keyboard shortcuts cannot touch a marking menu for speed!
In many cases, the CAD operator will hide the layers containing Datum Axes, Datum Planes, etc. Whilst the layer is hidden, items on it are not available for use as references for other features, even though, by clicking on the item in the layer menu or the Model Tree, it will show up in red in the model window.Idea:Make it possible to use Hidden references for features, but only if they have been explicitly selected in either the model tree or the layer tree.This could save a lot of time.For example, I may want to place a hole on a datum plane and co-axial with a datum axis.If my planes and axes are hidden, I must first unhide both layers, before I am able to use these references. This means that a great many Axes and Planes appear on the screen, so I either have to hide all the individual Axes and Planes except those I want, or query-select through until I find my targets.If this idea were implemented, I could select the datums I wanted from Model Tree or Layer Tree, without having to
Idea in question about possibility to insert the NC SEQUENCE FEATURE ID to drawing table repeat region! For large NC programs in tap file we record comments with FEATURE ID for quick search according NC sequence in CREO. For customers would very comfortably to write NC SEQUENCE FEATURE ID to NC drawing too.
I've got a customer who requires drawings that have dual dimensions. The primary units are decimal inches, the secondary units are fractional inches. The functionality to do fractional inches with decimal millimeters is already there. The functionality to do fractional inches is already there. I think it would be a good idea to combine the two.
Currently, when a new layer is created, it is set to shown by default.If there are any layer states, the user must then go into each one and hide the new layer.Please add a setting to control the default behavior of new layers.
When running Creo linked to a Windchill Server with autonumber enabled users are able to replace the <Auto generated> text in the file name box whilst creating a new file. Can we have a configuration option to stop users doing this?
we can define screw and threaded hole by "Machining" command. If screw is larger than threaded hole (i.e.M8 screw and M6 hole ), “clash” command is detected as clash. It’s OK. But if screw is smaller than threaded hole (i.e.M6 screw and M8 hole ), “clash” command is not detected. I would like to check both situations.
Taking care of basicsHave File name, Number and Name labled consistently the same in Creo and Windchill. Every person is befuddled by this and us admins can only shrug our shoulders and say "PTC". Nobodies taking care of the basics.
Given the "flexibility" that the ribbon interface has given us. I think I've managed to get most of the tools I use in the Quick Access Toolbar to mimic WF5 somewhat. The only thing that I've found so far that is restricting this is you have to be on the "Annotate" tab for the detail tree to show up.It would be nice if it could be toggled on and off despite what context the user in in.Thank you.
Wird der Befehl "Bewegen" (modify) gewählt, kann dieser im Drafting mit der FluentUI Oberfläche nie ohne Optionen ausgeführt werden. Man muss manuell in der Befehlszeile modify eingeben. Diese "no option" soll wieder hinzugefügt werden.Danke und Gruss Urs Ammann
In Creo 2.0 it is possible to create different assembly situations by using multiple placement sets. These placements can be controlled by a new parameter (PTC_CONSTRAINT_SET). If there is an extra column showing this parameter in the model tree it can be changed very quickly there. The idea is to control these combinations of placement sets inside the view manager (like layers, styles, orientations ...). In this case it can be used inside the combination states. When switching through the combined states the prepared assembly situations can be switched pretty easy.
Often the system administrators are not happy with having a part (Modeling) of the installation in c:\program files and the other part (Drafting) in c:\program files (x68) on 64 bit Windows 7 systems. If you change the path during the installation process to c:\program files it is silently changed to c:\program files (x86). This is done by the installation program to obey to a a kind of Windows 7 "style guide" that likes 32 bit programs to be in c:\program files (x86).If it is necessary to follow this style guide the administrators will understand this, but silently changing the location is a no go. At least a message box should appear.
I would like to see Creo's "Perspective View" have similar functionality to that of Autodesk Inventor. In Inventor, the user is able to zoom through model geometry while being able to utilize other commands (ie. analysis). Here is an example of how this functionality is very useful:Imagine you have a large assembly like an automoblie and you would like to measure the distance between the piston and the cylinder wall within the engine. In Inventor, you would just select "Perspective View" and then zoom into the engine assembly until you have reached the cylinders. You would be looking at the geometry broken away and easily select the OD of the piston and the ID of the cylinder wall. Without the zoom through functionality, you have to do one of the following:search for and activate the specific assemblies/models in questionhide all of the components in the wayright-click and toggle through a long list of features (sometimes guessing its the right feature)In most cases, all of these optio
For the Machine Module: I need to create a "countersink thru hole", but I want to input the countersink by DIAMETER, ( not by chamfer depth ). The reason is that I always know the countersink screw head diameter, but the chamfer depth is irrelevant to me. Also, the countersink screw head diameter varies quite a bit from manufacturer to manufacturer, and tolerance of manufacturing. Often I know the exact head diameter only after I have decidced who I will be ordering the screw from - and not before then. Therefore, the MOST RELEVANT INFO is the head DIAMETER of the countersunk screw - NOT the chamfer depth. Please incorporate the option to specifiy the countersunk hole in the Machining Module by countersink hole DIAMETER. Sincerely, Stephan Davies
I want change position of hole No. after hole table was made. But I can't change position of Hole No. by table's refresh.It is hard to look at hole No. because a hole No. overlaps with a hole shape partially.Wildfire and Creo elements/Pro can change it,but Creo2.0 can't.I think that anotation's position is important for Drawing.So I want chenge it in Creo2.0. Video Link : 3672
Currently in Creo 2 you can make extrude that is not adjacent to base sketch like in pic1 by adding "-" infront of blind distance. Unfortunatly you can`t do same thing if you use "blind" for both sides it only works if one side is defined by "to selected". If you add "-" when "blind" is set to both sides of extrude they just switch places. Enhancment: Allow extrude not to be adjacent to base sketch when using "blind" on both sides of extrude by ading switch icons or keeping the "-" infront of number like in pic 2.Picture 1.Picture 2.
I want the DLL file which opens Creo2 by Wildfire 5.It was independently provided before Wildfire 5.If Creo was not installed, it became impossible to obtain a DLL file after Creo 1.0.If Creo is installed, it is not necessary to open Creo by Wildfire 5.I want only the DLL file of GCRI, without installing Creo.http://www.ptc.com/products/granite/gcri/free-download.htm
when multiple relation sets are attached to an assembly they are automatically grouped into a pseudo folder. the color of this pseudo folder is allways green even when all the relation sets in the folder are up to date.
in annotation it is possible to change the number of a sheet, but you can not add a name to it.when you have a drawing containing several sheets, each containing a different part of your assembly, it would be much easier to find a specific sheet if you could at the name of the part to it.
When working with very large assemblies and some subassys expanded, it is often hard to distinguish the different assemblies and to notice to which toplevel assy a subpart actually belongs. It would be helpfull if subassys could be given a background color in the drawlist (together with all its subparts).
There is nothing more annoying in any software that provide icons for features you do not have a license for.Creo/Pro is full of icons that have nothing to do with the features you have a license for. both in the default menu and the choices when modifying the ribbon.This idea is to either:1) Hide all the icons to features or functions which you do not have in your license file.2) Allow users to switch off all icons for unavailable licensed extensions in config.pro and/or the ribbon editor.I understand that this may be a means to advertize extensions but for me, it is simply annoying and space consuming in my ribbon.The fact that many icons are grayed out makes them useless even for advertizing since you can never pick them.Doesn't this increase PTC service requests to understand why a function is not available?I know it is too late for Creo 3 but I hope this gets some serious attention. It just makes this software that much more annoying.
When creating a drawing, Notes, etc. frequently must be related to views or objects, so that the note follows the view or object when it is moved around the screen.It would be extermely useful to have some kind of 'ghost line' between the note and the view or object to which it has been related. This would provide a quick and easy visual check to see that all the notes have been properly related.Obviously, these 'ghost lines' would only appear on screen, they would not print out on the drawing proper.This would be a time-saving enhancement, which would prevent much costly re-work.Please vote up if you think this would help you.Thanks,John
Actually to TRIM of QUILT we need copy of surfaces. Tree is already long. So to do the model tree shorter I propose this shortcut.
In creo sheet 2 is used for creating a flat stat view of sheet metal parts (dxf export).The pdf publish should only publish sheet 1 (sheet wityh the drawing) and not sheet 2 which only used for the dxf export of the flat state.
When saving a copy of part or assembly using Save-as, Creo would only copy the associated drawing if it has same name as the part or assembly.Creo should be able to save the associated drawing even if drawing file is different. Many companies follow naming conventions which results in different name for part and drawings, in these cases users can not use save as part with drawing to create a copy of both part and associated drawing(s).Some users may also have more than one drawing for a part/assembly and different drawings would have different names; Creo should copy all the associated drawings.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.