Recently active
In assemblies or parts it is possible to do some windchill actions by right click on the model tree (check out / lock in workspace.....) In the drawing mode it is not possible. This is very inconsequential from ptc.Of course you can do this in the workspace (as ptc told). But i think ptc did never test anything with a workspace including more than 10 files. With the menu by clicking on the drawing tree, handling of drawings in workspaces with more than 5 000 files would be easier.
When creating a 3D pdf in Creo Elements Direct Modeling, you can measure on the 3D pdf in acrobat reader. Sometimes this is desired functionality, but sometimes, this is not desired, for example if you want to send this 3D pdf to a customer and you want to protect your intellectual property.In the 3D pdf file type, it is possible to set a flag so you cannot measure on it. But currently, Modeling cannot set this flag to prevent measurement.In the options of the “save – 3D pdf”, there should be added a setting “Allow measuring”
It would be very beneficial to many of us if we could color a finished casting so that finished surfaces are 'grey' and rough surfaces are 'orange' (or any other combination) - in an intelligent way. 'Intelligent' means that the solid surfaces know that they are finished, hence all the other surfaces are rough.This concept can be extended to other properties of solid surfaces, so that colors can be used dynamically to visualise specific aspects of a solid.
Until Ver. 17, user could select Geometry or Construct in menu of Project/Contour.Since Ver. 18, it would be divided menu to Project Geometry and Project Construct, but no option of General and Cross Section for Construct.About this also, there are questions from some users. We hope to add.
Until Ver. 17, user could select manual or calc in menu of Properties/Geometry.Since Ver. 18, function of Select is added. It may be replaced instead, but there is no option to select manual or calc in there.About this, there are questions from some users, so we hope to support it.
Currently - Help Center Searches can return an excessive amount of inappropriate references. For example… “pipe” is a feature in both parts and assemblies. However, entering “pipe” in the Help Center Search returns 862 results…This provides a lot of un-useful 'help'. If Sub-Applications or other filters could be selected or de-selected as necessary, everyone could find the appropriate helpful information they need... much more efficiently. In this example (there are many other similar situations), if a sub-application of "Piping" could be de-selected, then only results NOT including the piping application would be listed as relevant.This would save hours of wasted time examining inappropriate help center search results.It would also help to have the table of contents location (path) listed at the top of each result page rather than have to hit "Show in Table of Contents" each and every time to determine if the information is relevant.
Why does your model tree "hide" command works as it supposed to - i.e. hides entities instantly, while layer one does not? Is there any reason at all for when you select "hide" or "unhide" for a layer, it does not do that untill you click in a modeling window? Just pure commons sense and a click-saver, please fix, thank you.
Currenlty in drafting you can copy the text string of a feature control frame (FCF) and paste it into an "fix" of a dimension. We have predefined some of the sub fixes with generic entries that users just modify to their specific needs. One benefit of this is that when placing this dimention the dimension lines will adjust and not cross over the subfix FCF on a horizontally oriented dimension. In annotation it is not possbile to embed the FCF as the subfix, so users will try to place the FCF under the dimension and break the dimension line. This will work until you update the view/drawing and since the end point of the dimension line does not change when doing a break, the dimension line becomes whole again extending over the FCF unless you leave a small section of the dimension line above the FCF. Embedding the FCF into a "FIX" would be a great improvement to Annootaiton.
When using the measure 2D vector command you do nto get the same clear feedback for direction and langth that you do with measre direction and length. better visual feedback would make this command mush more useful.
Many older engineers and designers are having a hard time with the reibbon at the top of the screen with bifocals. Adding an option to move the ribbon to the bottom would reduce neck strain.
The udf placement window is too large. I has to be moved and resized every time. Need an option to change the defualt size to be smaller. Reference call number c11675230.
Additional selection possibility. (To change with the tab key)Strategy by setting user:Default behavior -> Geometry in the material --> RemoveAdvanced behavior -> Greater proportion of the geometry in the material -> Remove &nb
LS It would be an improvement when I would be able to choose which dxf version I want to use when I save, As in Drafting: Now I need to edit the dxfdwg.con to achieve this, Kind regards, Simone ManuputtyXandorra BV
When a section view is created in a part. Make that section view part of the model so that when that model in inherited the section view is available to be displayed in the part that inherits it. This would allow a user to not have replicate the same section views that were already created once in the inherited model.
Would like the ability to change the font of multiple text entities at one time. With this a smart filter of “Text” could also be useful.
It would be great to be able to copy a table from a different source (eg MS Excel) and paste it into a pattern table, ie in the pro/table box.
When using the Table pattern the Pro/Table box opens. If you enter something wrong you only get a message when done that something is wrong. It would be great to have an indication of where something is wrong and maybe a suggested correction.
To speed up the workflow, on entering the edit environment for a style curve, the curve end markers/vectors should immediately be visible rather than then having to select the end point to active the marker
Wenn man ein Schweisssymbol setzen will kann man die Position "links von" oder "rechts von" wählen. Erwarten würde ich, dass dann auch der Cursor am entsprechenden Ort hängt. Dem ist leider nicht so! Wäre schön, wenn es so wäre!If I want to put a welding symbol, I can use the "left of" position or "right of" choose. I would expect, that then the cursor to the appropriate location depends. Unfortunately this is not so! Would be nice if it were so!
When you've altered the coordinate system, say that you've got the z-coordinate facing downward, a mirrored part assembled with Default Constraint in an assembly is placed in regard to the top plane. Hence, the mirrored part is located in the air above the assembly and not in the assembly itself.The product idea is to let the user choose which plane to mirror the part in when using the command mirror part/mirror assembly.
Quando copio una sequenza di volume in manufacturing devo confermare tutti i riferimenti uno alla volta, bisogna inserire un comando per confermarli tutti.
A possibility to check the geo resolution of parts with the function "Check parts" --> which parts have have a geo resolution less then 1.0E-2
In your list of "How-to's" on the PTC Community Help page, you should have a How to submit a claim/file/bug report/whatever to tech support with steps walking you through how to do this so that those who need to, can follow these instruction and submit items to help improve the software.Thanks, Dale
If i change the centerpoint of a radial faceset pattern i would like to use the key "R" (relative measurand)Like the centerpoint of an Machining hole/thread.Beim Ändern des Mittelpunktes von einem radialen Formelemente-Musters würde ich gerne die Taste "R" benutzen können.Ähnlich dem Mittelpunkt einer Machiningbohrung
If you do a check_part for an assembly you get a list of parts with problems (corrupt, ...) in the display window.If you want to see only one of these parts to check or repair it is a bad work.Better would be a list like the result browser for the clash analysis.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.