Recently active
Need to be able to control servo motors in the same ways we can control forces. Specifically, need ability to drive a position servo via more than just the current "time domain".Example/Justification:A rocket engine is on a gimbal joint. The rocket is assembled "to a space assembly" via a 6DOF joint. 12 Measures are established that measure the rocket bodys' 6DOF translations and accelerations.When the engine forces are turned on... as are other perturbing forces, the rocket departs from the original 6DOF joint. I need the ability to alter the gimbal positions to compensate for any drift (as measured using those 12 measures) from the intended flight path.Note: This works just fine if I strip the engines off and use forces at the engine connection points. However, this creates a lot more manual work as I must create and manage another model (without engines), I must create 3 orthogonal force features (x,y,z) for each engine... and 3 drift lookup tables for each force direction. I must t
Need to be able to create different "mass measures" that then allow the user to select any number number of beam and shell elements. Each measure will report the total mass of whatever entities have been assigned to it. Importantly, for this usage it would often be important to be able to assign some elements to multiple mass measures.Example/Justification:I build an axisymmetric model of an entire rocket stage which, in practical terms represents a multitude of design elements (propellant tank assemblies, engine support structures, etc). I then run optimizations which provide "first-cut" sizing for shells and beams that provide "least mass" without failing.There are many common cases where we need to know what the optimized mass of particular "component sets" are. Not having these measures, I must create a spreadsheet, manually enter the optimized shell thickness and beam cross-section dimensions, and slog through providing this mass information to other teams.
Currently there is functionality that allows text to be added to the right of and below a feature control frame from within the FCF promt. The ability to add text to the left of and below the FCF would be valuable functionality.
Unequally disposed tolerance (letter u inside a cirlce) is not an option for profile of a line tolerance. This is an option for profile of a surface but not profile of a line. This is allowed in the 2009 standard.
I would like to be able to pass some standard Part property attributes from Modeling to Model Manager i.e. Mass, Volume, Material & Density.
Where appropriate, on selection of a planar reference - datum plane or surface - create Sketch should always be available in the offered context sensitive Shortcut Menus (right click menu)Maybe just allow Shortcut Menus to be customized?
When previewing a mesh in AutoGEM we should be able to preview it as transparent so we can see internal nodes and edges of the mesh. Perhaps the created mesh could follow the display state of the model. I'm aware that we can turn off the viewing of solids in AutoGEM settings so the nodes can be previewed, but it is difficult to imagine where the element boundaries (edges) are and to verify intent with AutoGEM controls without running an entire analysis.
Two enhancements that would be useful in Creo model tree: 1. Possibility to change file name from model tree to a parameter value (for example description). Models are usually given a generated number as a file name, therefore it would be useful to be able to show other information in model tree. 2. Possibility to show the workspace status of the file (checked-out etc.) in model tree iconsYes it is possible to add tree columns and get this information on the side. This takes space and is not the same. This suggestion could improve model tree usability.
I would like a config option that will export sketched text entities as text at least for DXF, DWG & IGES exports.According to TPI 139572, https://www.ptc.com/appserver/cs/view/solution.jsp?n=139572&posno=3&q=Export sketch font&nav=The alternate technique is to create a Annotation feature or a note in the drawing. Many times it is easier to create the text in a sketch with other geometry.
Customers asked for a function were in a cylndrical part one could click on the top face, enter distance for PULL FACE and then in the same command change te radius of the newly created part of the cylinder. This would prevent quite a few mouse clicks . Kind regards, Simone ManuputtyXandorra BV
Would it be possible to measure the length of the vector between the two points on either end of the cylinder ? and display it when the user hoovers over the cylindrical face ? Preferably highlighting extreme points, or vector, Kind regards, Simone ManuputtyXandorra BV
I always promote with enthousiasm the use of 3D copilot in my trainings. There is one thing though, that I cannot "sell" to the customers: the fact that when selecting fixed of moved references, I can snap to centres of circular edges but not to centerpoint of linear edges. I cannot use ctr+shift either. If this was made possible, it would be a simple improvement in the use-concept that would have a strong & positive impact !
Mini toolbar : preselect multiple cylindrical faces does not result in change diameter function present in toolbar. Kind regards, Simone ManuputtyXandorra BV
Provide the option to have a break function for symmetry lines. At the moment it is a cumbersome job. And : after a view update if no precaution has been made (by adjusting view props, stating that sym lines should not be calculated) the gap is gone again Kind regards, Simone ManuputtyXandorra BV
These additions to the option mini toolbar would improve speed in pull operations checkbox for keep workplane or: K as toggle option checkbox for : create new part (were p1 will automatically by p1.1) or field to fill out new partname Kind regards Simone Manuputty
In some situations users encounter the following. user would like to place a tangential dimension, and place that vertically mathematically this is not correct. (because, yes there are tangential lines, but they are not parallel once you put the dimension vertically. You get the "click not valid" message in this case the user does not so much care about tangential conditions, the user just wants to show production the outer values of these kind of plates. so an enhancement could be to offer a new type of dimension. maybe even based on the outer lines that define the view rectangle ? so what would be an enhancement for these situations Kind regards, Simone ManuputtyXandorra BV
Add a menu item "Add Radius" (above Make Constant?) to the variable radius round right mouse button when clicking along the radius chain as shown below:
When selecting a view and using the "SHOW MODEL ANNOTATIONS" option, every dimension, g-tol, symbol etc that is able to be displayed in that view is shown. In some cases there could be hundreds of dimensions that could be in the list. They are not displayed in sequential order when there are inheritances in the part. It would be great new functionality to be able to be able to sort these by their name so they would be listed in order. It would be even better functionality to be able to search for specific names.
We have gone through a few iterations of our formats over the years. The latest forced us to change some table sizes. This has resulted in additional vertical lines in the title block area when old drawings are retrieved with the latest versions of formats. If we want to re-issue the drawing without changing the format we must retrieve the old version of the format. This can cause issues when working on new drawings in the same workspace. All of the information required on our title blocks lives in the models hence use the power of parametric's. Formats currently are NOT parametric. I propose PTC to create a option to allow formats to work 100% parametric or 100% embedded into the drawing, not somewhere in between. As shown in images below if we could define the drawing to update 100% to new formats we could save time from updating the formats when changes occur. Please vote this up.Original format in use:Latest Format In-Session:After Format Replaced with Latest:
Currently in Creo 2.0 M080, When changing a drawing view Sectioned Area from Full to Full(Aligned) some of the shown dimensions move. Some shown dimensions can not be moved back to the desired locations. Ex: angular dims or sketched radii. SPR 2140835 Closed as Works to Spec. PTC used to preach model with design intent (create dimensions in model as you want them displayed on drawing). Now it seems they want you to do the work twice, once to model the part and again to create a drawing. I don't know about everyone else but it will be a very long time from now when my customers don't require drawings. Please vote this up. PTC the request is not limited to section views. Give users the flexiblity to place dimensions where desired as long as it is applicable or at least how it was modeled.Dimensioned View as FullAfter Changing to Full(Aligned)ThanksWayne SchrockR&D/Leverage
Provide a drawing info report that summarizes the View Info for all views of a drawing in a single report. This could possibly be under the Review/Query tab of the Creo Parametric drawing ribbon. We would like this information for each view,View name, View Type, View Model, Model Rep, View ID, Sheet Number, Partent View NameTo improve drawing performance, we find it useful to refer to simplified reps of our assemblies rather than master reps. It can be very tedious to go through each view on each sheet one by one to determine which views are using which reps. We have many drawings in the 25-75 sheet range. A report such as this would simpify the task and help us combat large drawing performance issues.
Allow users to expand the Set Model & Del Model selection list within a drawing to display more models. Currently you are limited to seeing only 9 models at a time and are provided awkward scrolling arrows to traverse the list if you have more than 9 models. Provide a more modern interface that would enable the user to display a list of all models used within a drawing at one time.
We're now using the "Creo Elements Pro 5.0".In the portion of the CAM, to create a point "GOTO" the tool path,If you enable the configuration option "enable_classic_nc_steps", we use the features of the "Classic Turning".If you get lost in the following "Creo Parametric 3.0" config option "enable_classic_nc_steps" isSo troubled, I want you to leave the function.For automatic translation, it may be difficult to understand, but thank you.
BOMs on drawings are quickly becoming antiquated with the use of PLM tools. With the CAD assembly being used to generate BOMs, the ability to exclude from BOM, and NOT hide the CAD part, is functionality I'd very much like to see within an assembly and not via repeat regions in drawings as it is presently.Other CAD programs have this functionality.
In drawing mode I would like to have the ability to use both horizontal and vertical view alignment at the same time. Currently I can apply one alignment then the next, which ever is applied last will be the rule that applies. When the parent view is moved the last alignment applies and I have to go back into the view properties to realign the other direction. This wastes time. Please vote this up.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.