Recently active
For example: 1.Select edge, can chamfer and copy by RMB 2.Select surface, can offset, thickness, trim, merge and copy by RMB
Allow the creation of a Datum Plane in the middle of two surfaces or two planes.(Midplane Parallel, midplane between faces, midangle - Solidworks has this nice functionality…)
Currently, all legacy Mate/Align interface constraints are always reversed in Creo Parametric.This causes the user to have to flip them every time they are used.To work around this, companies are forced to modify hundreds of thousands of files, changing the mate/align interfaces to the new coincident/offset ones, or users are required to make tens of thousands of extra operations flipping everything. Additionally, there is no differentiation between coincident constraints, so there is no way to tell which "coincident" applies to what feature.PTC, please fix the new coincident/offset constraints so that legacy mate/align interfaces still work.
It would be great to be able to use the model tree research with parameter displayed in column like we can do with the component name The research should ask in which column it must look
When modifying a component in an assembly context, I RMB, Activate the component. If I then click the Show Datum Planes icon, for example, all the datum planes throughout the whole assembly, that are not on a hidden layer, show up. It would be more convenient if only the datum features within the Activated part were shown.Ideally, this behaviour would be controlled using a config option, so that external datum references could be selected when using Top-Down Design, for example.This should apply to all kinds of datum features, including Points, Axes, CSYS and any others you can think of.If this is already the case in CP2, I promise I am working on the upgrade!Still on WF4, here, M220, where is not the case, as far as I know.Please vote up if you think it would help.Yes, I do know about controlling datum features using rule-based layers.This would just make things easier and therefore better.In summary, then, the idea is:Add a Config Option to switch the Datum Features that are shown in
INHERITANCE FEATURE FOR ASSEMBLY SAME AS INHERITANCE FEATURE FOR PARTS. POSSIBILITY TO SUPPRESS PARTS & TO CHANGE ASSEMBLIES DIMENSIONS.We need this functionnality to decline assemblies wich contains differents parts (because of different grooves) but should be dependent to a master. Today we a doing family tables. CREO BOM should list the component of the Inheritance feature (components of the source assembly that have not been suppress by the user). WTPart of the Inheritance assembly should be created and managed. Careful with the WTPart of the source assembly: should not be affect by internal modifications of the inheritance feature. (we use multi-owner links)
If I'm working in widget.prt (or thingy.asm) and I create a new drawing, the name of the drawing should default to widget.drw (or thingy.drw), instead of drw0001.drw.This would save a lot of people a little bit of time several times a day, for little programming effort.
Well, according to this document, the ability to control the visibility of annotations by layer was removed in Creo 1.0, Parametric. It is now recommend to use "Combined View States" instead.This is fine if you're doing model based definitions, but it's a cumbersome substitute if you just need to see a note on screen occasionally.We need a simple, on demand method of controlling the display of annotations in the 3D model. Layers worked well for this, that functionality should be restored.
selection filter does not expand to be able to select specific feature required. e.g. edge/surface etc. to attach note leader.
The symbol sketcher tools are not even up to 1980's CAD functionality. It's like PTC started to develop the tool then just quit.Please update the symbol sketcher to include:Crossed Centerlines - For holes, cutouts, etc. Currently users have to draw at least 6 elements, divide them, trim them, remove segments, then delete construction geometry for every hole centerline drawn.Dimensions - really?! Still no dimensions available? Spending hours drawing dimension leaders and arrows is not productive PTC.Sticky preferences - Why do we have to set the preferences every time we enter the symbol sketcher? I can't understand why horizontal and vertical snapping is not on by default.Robust grouping tools - Move details between groups, copy elements from one group to another or to all, maybe a graphical group tree.Add more in the comments.
Wireframe font named “font” is too segmented. We need a smooth font with a minimum of entities.A better Pro/E or Creo font should be created or the original Pro/E “font” modified.Non-linear entities should be defined as arcs, ellipses or splines as illustrated.An enhanced wireframe font would improve the quality and the time of CAM engraving tool paths.
An idea should be to modify and to uniform the User Interface specialy in Symbols Creation Windows.In Creo 2.0 We still have an old interface:It's really hard for beginner and for designer who come in these feature one time a year to understand or remember what they need to do in order to Create /Save a symbol:Some features are not available after 33 versions...Hatch / Fill with color in symbol are really bad and poor quality.No diagnostic for 2D entities like sketch tool.Variable text is \exemple\ not the easiest way again.Color gradient are not available.Image can't be insert inside the symbol.Table can't be insertGroup with level are really really hard to manage with levels ... inclusive or independant ? What dosen't that meens for beginners of oftently users.Why don't create an environnement like the sketch Tools ?Save feature windows have an old school interface and you can't easily change the path where symbol are save...I oftently need to create my new customer symbols in these
Tables would really solve a lot of formatting issues for notes.Problem: You cannot remove the outside border lines from a table.Solution: Allow the border to be blanked in the same ways that cell borders can be blanked.Incorporation of this idea extends to other desired table applications where the outline border is simply not appropriate. Particularly relevant is border format generation where relation driven data is desired and can only be incorporated with tables.
While showing or creating diameter dimension in drawing view, diameter dimension arrows should automatic flip outside of circle if the arrows does not fit inside the circle.
Text boxes have been painful since the inception. Why not make them work like modern text boxes of, oh lets say, the last two decades. The text box on this website is better. Formating is difficult in drawings. What You See in the input box, is Not What You Get on the face of the drawing. One has to click in the drawingn area to see if it came out right. Making bold or different font size requires ASCII programing, (sure easy enough) which turns into just another thing you have to learn to use proe/creo. AND TEXT WRAPPING! Set the size of the text area and have it text wrap. Make symbols easier to input to text box. This is one of those areas that has been left behind but is used all the time. People who are new (and old) to the software go "wow this is like form 1980's". No wonder it takes so long to learn proe (creo, whatever). It doesn't appear to have any improvement in Creo 2.0 which is amazing.
Datum display filters should be able to hide all types of planes -> "Set Datum" also.Turn OFF the display of ALL planes
It would be nice to double click on a table and for it to switch to an "Edit Mode". It should have all similar functionality of any basic spread sheet, but the icons and formating tools are shown surrounding the table. Column/Row size should be dragable or editable via character/number size. Character formatting by icon, tool or right click context. Control of repeat region and pagination could be additional drag functionality. Insertion and deletion of row or column could be a right click option (dependant on selection). This should interface should replace all table types: including family table, hole tables, pattern tables, actually everything. A common interface being the idea.
Why don't create a fantastic material library like other CAD software with more than 20 defaut material.Today each customer create or recreate there own material in mtl... but I'm sure that most of the standard materials could be create with an Hatch include and a realist color associate. SW do that perfectly by default so why not PTC...These material library could be install and activate or not like PTC have done with a Graphic library few years ago.I'm sure it could be possible to get some PTC direct customer's material library ....graphics library .... Hatch Library ...Mapkeys.. then merge it in a beautiful User Interface Windows.... That will be my dream and for a lot of customers.A way to have global edition of all material values ...Density... Young modulus .... like Excel should be perfect. We have devellop a spreedsheet who do the job perfectly in my company.Another idea is a way to sort by physical and structural caracteristics in the Material Attribution Windows. It cou
A new system color option for the highlight color of selected field needs to be added in Creo 2.0- In Creo 2.0, the highlight color (Medium grey/pink) of selected field is not clear enough to differentiate with lite grey/pink.- With Creo elements/pro 5.0, the highlight color (Yellow) clearly shows what needs to be selected.PTC Call resume: In Creo Parametric 2.0, in the Ribbon, In the tabs, when 2 or more selection entities fields are shown, the selected field has a dark grey color and the unselected field has a clear grey color.
When a feature inside of a group has failed the group itself does not indicate it contains a failed feature. You have to expand the group to see if the failed feature is inside. If the group that contains the failed feature would also show as a failed feature it would make navigating the model tree much easier when fixing failed features.
Newer monitors are much wider than they are tall and the new (horrible) ribbon scheme reduces the useable model space.Please allow the ribbon to be moved to the left or right side of the screen. Even better, abandon the ribbon scheme for something that actually increases productivity and improves usability while taking advantage of wider aspect monitors.
I would like to be able to mirror sketched entities by using a reference line.Today, I systematically need to sketch a centerline before mirror command.WildFire 5.0ReferenceSketch centerlineSketch entityMirror entityEvolution for faster sketchingReferenceSketch entityMirror entityIf necessary, the system could create a centerline when the user mirrors from a reference line.
When sketching in Creo4 Parametric, the default option "sketcher_snap_model_geometry yes" needs to be improved. The background geometry appears non-stop and conflicts with the visible geometry on which we would like to snap on. The environment doesn’t help to filter what is "snapable"or not. You snap on invisible geometry or references. Please improve “sketcher_snap_model_geometry” option !(view in My Videos)
The contrasts in Creo 2.0 dashboard between tabs available (or not) for selection is not very visible compared to Creo Elements/Pro 5.0.Please improve contrast !
Have a config.pro option to configure Creo for a default drawing size.In Europe, we would probably use an A4 or an A3 size but we never use C "Standard Size".Using the templates is one click more … plus it seems logical for Europeans to configure Creo with European standards.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.