Recently active
Some users are quite experienced and the slow pace of some of the PTCU and learning exchange videos is basically wasting a lot of time. A suggestion from our field was that the videos could be allowed to be played faster and thus the users could get a level of awareness at double the speed in order to spend less time doing update training and so on.
Si potrebbe creare un backup di un assieme (asm) con tutto ciò che vi è collegato.Assieme => Sotto assiemi => Le parti di cui è composto => I drw delle parti che lo costituiscono.Questa operazione avrebbe tre benefici:Copiare lo stretto necessario evitando di copiare un'intera cartella di lavoroEvitare di avere nuove cartelle eccesivamente pesantiDover copiare un drw alla voltaCordialmente,Arrigoni LeroyTraduzione con Google traslate:You could create a backup of an assembly (asm) with all that is connected.This would have three benefits:1.Copy the bare essentials, not to replicate an entire workbook 2. Avoid having is excessively heavy new folders 3.Dover copy a drw at a time cordiallyArrigoni Leroy
I want to 3D Access for free.It only has functions as same as other free viewer.Modify 3D etc. are unnecessary.
When the config file includes layer creation/management and has def_layer LAYER_QUILT, it should not create a layer when an iges or step file is being imported that is being solidified. Creo should only create the layer if the model could not be solidified and a quilt is created instead.
We would like to use a combination of Mapkeys and Batch Files to review models that ModelCheck can not do. Some of these checks require the results of very specific and complicated searches using the FIND/SEARCH tool. We would love if we could export these results so that the Batch file can analyze it. Currently there is no functionality to export these results.Thank you!
PTC, Please add the ability to allow the Diagnostics Window to show you where the invalid fasteners are location in the assembly. With an assembly with around 100 fasteners this makes it very difficult to trouble shoot the error. Thanks, Don Anderson
Please add a feature number column to the Children Handling dialog box:
We would like the ability to filter components in an assembly that include specific items the search/find tool is already looking for. So the SEARCH/FIND Look For would be Components and then the Look by would include things like placement dimensions etc. This way, users can search and determine which components in their assembly have these traits. It would be a quick way to find whatever the user needs to know about the components. For instance, we would want to know which submodels are using an offset constraint with a dimension of 0 (instead of coincident). If we currently search for dimensions, we can get a list of those specific dimensions. However, we can't filter which models these are coming from in the model tree.Thanks!
We would like to see a right click menu for most common command for a selected element (like in Direct Modeling).Thank you,Scott O'BrienTensor Engineering
We would like to see the option to update all relations sets.Thank you,Scott O'BrienTensor Engineering
We've found that it can be quit difficult at times to debug parametric relation errors in Direct Drafting. We would like to see better debugging capabilities and error messages.Thank you.Scott O'BrienTensor Engineering
The default menu font size in Creo Elements/Direct Modeling and Draft is too small, but currently cannot change menu font size
Reference : PTC Case C13465057I had opened a support case with this ID & received the following reply, ---------------------------------------------------------------------------------------------------------In the model database, the feature is not recognized using default name. A feature can be initialized only by using the name explicitly assigned by the user. Only for Datums (planes, axis, CSYS), Creo explicitly assigns a permanent name, that can be initialized using its default name by using ProModelitemByNameInit(). So your issue is work-specification, need to change the feature name. --------------------------------------------------------------------------------------------------------- At present, this API returns PRO_TK_E_NOT_FOUND error for features created using default name.We cannot ask all our customers to edit each creo model & rename every such feature.Therefore, requesting you to consider this as an Enhancement Request.Thanks in advance.PS: Please keep 'nikhil
The only (is it?) way to create a partial bend in Sheetmetal is using a sequence "Bend" -> "Unbend" -> "Bend Back" by excluding contours in tab "Bend Control" There should already be an option in "Bend" feature to exclude contours, e.g. by allowing a divided bend line (see picture)or by inserting a tab "Bend Control" analogous to "Bend Back" feature.
Ovvero:Da un assieme principale,ci sono alcuni componenti, presenti in alcuni sottoassiemi, che hanno un determinato parametro, che vorrei filtrare.Esempio:Assieme principale: automobile.Sottoassieme: Sportello01Parte: Prt001Parametro della parte: Vetro150Il filtro può escludere le parti con il parametro Vetro150, presenti nel sotto asseme Sportello01.Traduzione Google A main assemblyThere are some components present in some sub-assemblies, which have a certain parameter, I'd like to filter. Example: Main with: car. Subassembly: Sportello01 Part: Prt001 Part parameter: Vetro150The filter can exclude parts with Vetro150 parameter, in the under Asseme Sportello01.
In case of a metric fine pitch thread, the information of the pitch is not forwarded into the dimension of the thread (e.g. M10 x 0.75). The Idea is, use the information out of the hole file into the dimension of the thread to reduce mistakes in the production area.
slotted holes are very commonly used when making connections, but Part Library is not able to make them or to place connections based on existing slotted holes.it works perfectly with cylindrical holes.
Please add a option to insert multiple leader lines for shown/created dimensions. In below picture R.12 applies at two places which was created using one round feature. To achieve this in Creo 2.0 I will have to create a empty note with leader line and align with the dimension. Thanks
If configuration option "msg_translation" is set to "no", it will become like many portions become an English notation. I want a setup from which only drawing view of note is set to English notation.
The day materialfile data has been loadad to Creo Parametric part, the valueset is merged to parts data. If there will be any changes in material definition, there is no handle to control if parts material should be updated.Solution would be to carry a last modification date, or/and a Windchill revision in material information. So this stamp could be compared with the corresponding materialfile. Now information could be displayed, if the material should be updated. By the way, to do this the materialfile-name should also be known by parts materialdata.
It would be possible very effective to have multiple criteria of selection with the function SELECT_FROM_LTAB, similarly with the function CATALOG.For example, it should be possible to write:SELECT_FROM_LTAB my_table COLUMN 1 = 'ABC*' COLUMN 2 = 'XYZ*' END
Mirror Part has this limitation:"The symmetry is executed about the XY plane exclusively" per CS30128. Let the user pick the plane during the operation.
Using the default colors: If the Print preview window is open, the text on the bottom of the screen which lists the scale / size... is a similar color as the background. This is hard to read and should be fixed.
Modify the Creo search tool to find functions by their “default name”.
FEM output for assemblies containing repeated parts with common thickness/material midsurface properties generates duplicate NASTRAN property cards. In large assembly models, the number of duplicate PIDs becomes large and merging them to facilitate thickness variation of a part via editing the bulk data becomes cumbersome. Request enhancement to merge these PSHELLs across common parts (e.g. all instances of PRT0001 should reference a common PID) or provide option to do so. Example mat/prop output for a pattern of two common parts of thickness .025" in an assembly is as follows:$ ----------------------------------------$ Mesh "ASM0002"$ Included Components :$ ASM0002$ PRT0001 (Assembly Path : [48])$ PRT0001 (Assembly Path : [50])$ Coordinate System for grid coordinatesCORD2R,2,1,0.,0.,0.,0.,0.,1.,,1.,0.,0.$ Coordinate System for default grid displacementCORD2R,3,2,0.,0.,0.,0.,0.,1.,,1.,0.,0.MAT1,1,3.82228E9,,0.3,0.098,1.3E-5,,,PSHELL,1,1,0.025,1,,1PSHELL,2,1,0.025,1,,1
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.