Recently active
Please add the ability for Creo Simulate Screw Fasteners to work with Tapped Hole Lead In Chamfers and Counter Bores. This would prevent the need to remove these chamfers from the model and allow the design to be saved to the PDM system as it was setup for the FEA run. This enhancement would remove in most ways the error message "No contacting surface pair could be automatical AutoGEM"
Please add the ability to open models while in simulate assemblies by selecting them in the main window and using right click to open. How many times have you worked on an assembly where you do not know the model name and it is hidden in the model tree. Give us the same ability that is available in the normal assembly mode. Thanks,Don Anderson
backups Copy the drawing
There are certain operations in Creo from which the only way for a user to escape is to exit the program:Importing a table or format that prompts for parameter creation.Conflicts on save which try to regenerate and verify massive family tables.I'm sure there are others; please add them in the comments.It would be really nice to have an escape command for these situations without having to close Creo and lose work and time having to reload models after restarting.PTC, please add an escape command.
With Creo Parametric we can now dynamically drag a handle and see the 2D section animate. I would like to be able to output the result to a video given a step size or at least a series of png images.
Actually, there is no possibility to use STL-Data to create NC-Sequences in Creo Manufacturing. This would be very nice in combination with simulation tools. Please add this functionality. I referee to case 12967129 Mathias Reiter
I need the ability to make 3D cross sections with any sort of sketch or curve whether it is a straight line or not. Currently you can only make an offset cross section with straight lines. I need to make them with arcs or splines. Currently you can only make zone cross sections with straight/flat surfaces. I need to make them with non-flat/straight surfaces. I can't believe I have to submit a request. Its a cut!
The title says it all.
3D Access is a very useful viewer not only for Creo Elements /Direct models. So it would be good, if the direct data interfaces, which are included in CED Modeling (SWX, Inventor...), would be also included in 3D Access. Some of my customers (with more then one CAD-system) would prefer to use 3D-Access as standard viewer instead of free viewers, if it was possible to open this external data.
Currently Creo 2.0 M170 the only option available to replace a flexible component is by copy or family table. I desire at least the options Interchange and Unrelated Component be made available to replace a flexible component. Reference CS132032.
I would like to see a set of features in Creo Parametric to allow someone to export the drawing views they setup in Creo as CAD blocks in DWG/DXF format. Case C12996357 describes two issues which were found to be working as designed. Currently, I arrange my drawing views and set an origin in the Creo drawing. Then I export as a DWG or DXF. I am required to open the DWG/DXF in AutoCAD and group each individual view as a block. I also have to name the blocks, which was done in Creo already. During the block creation I also have to identify an origin for each view, which was done in the Creo model using a coordinate system.
Currently, when assembling a component in a separate window, there is no way to control the layers or datum display in that window. This makes it very difficult to assemble small components in extremely large assemblies.PTC, please add display controls to the separate assembly window.
I want a shortcut key of "Rotate VP Axis +xx" "Rotate VP Axis -xx".Better to exist by default.
This type of functionality is not available in Sheetmetal MFG. If you want to have several contours / parts with bridges, you need to generate them already this way before adding them to the sheet. You could either use parts with the geometry of multiple sheetmetal parts merged or sketched geometry output to DXF (DXF shapes can be read into Sheetmetal MFG). I agree that this would be a nice new feature and hence encourage you to file it as a Product Idea. Of course the number of users of Sheetmetal MFG is small compared to the users of core functionality in Creo. Hence we will have to see, how many votes the idea will get in future, to be selected as an enhancement for a future version.
Need to be able to use smart BOM balloons on simplified reps.
Currently, when you register a Windchill server in Creo, it asks you for a Name and Location. The name is then used by Toolkit applications as server_alias, where server_alias MUST fit as shown here: wtws://<server_alias>/<workspace_name>/<object_server_name>If that is what the server_alias MUST be, why does it need to manually entered? It should be automatically harvested from the server Location. The server Name, then, can be whatever the user wants it to be in their server manager. In face, Name is an outdated field, since it used to control the display in the Folder Navigator, but has since been replaced by "Windchill Cabinets". The only place it is visible is in the Server Manager, and it would be nice to allow it to be descriptive without breaking toolkit applications.Reasons why:Users think Name means "give it a name", so they do.Users don't think Name means "the root path to your server"If you have multiple servers sharing t
The Creo Manikin library has Manikin files for just about every country. We have learned that the US Manikin models do not adhere to MIL-STD-1472 dimensional requirements. That seems like a shortcoming knowing that many US Defense contracts require the documentation in Creo. The current US Manikin does not seem to be receptive to modifications that could bring it closer in alignment with the MIL-STD dimensions. PTC Creo, can we have a Manikin library that adheres to MIL-STD-1472?
I would like a RMB option from a selected view (or multiple selected views) to match the view display properties of a different view. Once the function has been selected , you would be prompted to select the view which has the desired view display properties. This will change all the available options on the View Display pane.Reason for request is to reduce time & mouse clicks to change view display properties. We have many drawings that people have created with view display properties set as "Follow Environment" & "Default". I believe this is bad practice , because a drawing will display different depending on how each user has their environment set-up.
Request is two-fold.1. Provide an option/config setting to evaluate Assembly Level Cut auto-intersected components via true intersection. The nominal method would be to continue using the bounding box to determine intersected components, but allow the option to change this behavior.2. Provide an option to automatically re-evaluate auto-intersected components on regenerate. Currently, the system will collect intersected components automatically (by bounding box intersection), and place those components in the list. However, it does not currently re-evaluate this list when a component is no longer being intersected, and the only option is to manually remove the intersected component (or remove all manually and let the system re-evaluate what is now intersected).While these options would likely result in longer regeneration times in Creo, both would dramatically decrease the number of unnecessary Assembly Level Feature derivative models created in the PDM system.
No spaces? - i can create a folder with a space in the name - i can store files in a folder with a space in the name - i cannot name a file with a space in the name - this has been a "thing" for a loooong time, plenty of other polls already going on this topic I can use a dash here but i can't here? - i can create a file with a dash in the name - i cannot create an analysis with a dash in the name I can use a number here but I can't here? - i can create a file with a number in the name - i cannot create an analysis with a number in the name Please remove all restrictions to naming files/folders/analyses.
When creating a collinear constraint that places a line on colinear with a linear reference, Creo allows any H or V constraints to remain. This is technically over constrained, because both are only valid as long as the reference remains horizontal or vertical. If the reference changes, due to draft being applied for example, the sketch fails because both constraints cannot be satisfied:When a colinear constraint is applied, Creo should require that any H or V constrained be removed.
The automatic bounding box dimensions displayed on a drawing of a sheetmetal flat (see below) are handy - unless the company drawing standards dictate ordinate dimensions on flat views.These dimensions cannot be converted to ordinate and there is no setting that will prevent them from displaying automatically.The dimensions must be erased and new ordinate dimensions must be created in their place.Recommendations1. Allow these dimensions to be converted from linear to ordinate, or2. Provide a config option or drawing option that can turn off these dimensions to eliminate the extra step of having to erase them.
I think it would be handy to be able to with one feature at the assembly level be able to create a series of holes in stacked parts. In solidworks there is a similar feature where you can select the parts in a stack and select the hole type wether it is a counter sink, clearance, or tapped. This makes it easy to create different holes in multiple parts at once and also propagate the features to the part level as well.
It would be a real time saver if there was a button or a way to open the corresponding drawing for an onscreen model or assembly ? The other way around is easy as in the drawing you have on the left bottom a component tree to open the component but not reversed. This operation, retype the number of the drawing, is done several times a day by many designers and would be a real time saver. They are dreaming for years to have this
It would be great if you could have more than one active sketch window open, so you could flip between two models while still in the sketch window on both models. Currently you have to cancel out of sketcher (or it forces you to) and switch to the other model and go back into the sketch to interigate. Then cancel again and switch windows and go back into the sketch again. I find myself on complicated features going back and forth numerous times to see what the references are, or write down all the dimensions that I need to copy. It has got better in Creo 3, as if you are lucky it highlights the missing references (edges in a round feature) so its clear what your original intention was. Solidworks allows you to switch between different windows with open sketches with ease, its makes life alot easier.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.