Recently active
Currently when performing "Save a Backup" on assembly with suppressed components, the suppressed components are not backed-up unless the component is in session. I would like an option to backup ALL components regardless. I have large assemblies with many suppressed components it is very time consuming to bring into session all the components just to have a backup of the current Assembly state. The backed up versions will be used for other design variations that use components that were previously suppressed.Thanks for voting.
I would like to see if any other users have this need.We work in a work where we deal with a lot of Architects and they all use Architectural Sheet Sizes.When we go to create our Drawing Formats, we have to use variable formats and input the Sheet Dimensions (i.e. Arch_C - 24"x18"). In our title blocks we want to use the &format parameter to automatically show the sheet size. If you use the ansi sheet sizes it works great. However, if you use the variable formats it shows the dims and not C or Arch_C it shows 24" x 18".There is not current way to automate this since Creo does not have the Architectural sheet sizes in the default list nor do drawings have the ability to store relations on their own without a model.We would like to have the Architectural Sheet sizes added to Creo.Also, like the idea about the Architectural Scale options to be added. Architectural Scale
Now is possible to use any general scale of the drawing module in Creo Parametric and people have to write it manually. There is two bad moments:1. User have to remember all right scales;2. User can mistake - use wrong scale (1:3 for example). It will be great to have drop-down list (restricted vals) for fast and easy use right scale. Of course possibility to use any value of scale must to exist also.Let's make software conviniently and easy to use together.
Currently in Creo 2.0 you can define many sketches that can be used to create an extruded feature. The only way to change which sketch is used for the extrude is a manual redefine or reroute. I would like to be able to use a parameter to control which sketch is used for the extrude feature. This should work similar to parameter used for patterns by table. This would give me the ability to write relations to control the parameter for different situations and reduce user input. This will greatly reduce time and improve accuracy on designs. Do not limit this to just extruded features, apply to ALL features that can use a predefined sketch.Please vote for this if you think it is a good idea to improve Creo.Thanks
Greeting, This is an enhancement idea for Creo Lathe function. Currently, there is no indicative sign or forced action for “Clearance/ Home point setting” in the Creo NC lathe function. If users don’t set up “Home point” then collisions will be happened 100% while changing cutting tools in all sequences. There is why I made this video to warn this issue.
More often than not, "identical" is the best pattern option for features we create. If the feature does not have any variable options then it should default to "identical". This will eliminate people having to remember to change this setting.
Proposal: We need a functionality to set Creo Drawing Table editing source as MS Excel sheet.This is just similar like in Creo part/asm module, pattern feature editor can be set as excel sheet instead of Pro/table.Reason:In Creo drawing, we need to create table with at least 50rows X 10columns as shown in figure manually.Editing this table is really a cumbersome task since, ONLY one cell can be edited separately.No recurrence operation can be done here.Bringing .csv file via “Table from File” option also results in raw data result as shown in fig.Regards,Siva.A
Users often have to present their models in design reviews that often include managers and non-technical people. It would be great to have a "Presentation Mode" button that automatically optimizes the display for presenting. I can do much with a mapkey but not everything can be accomplished. Here is what a Presentation Mode would include, but not limited to: No In Graphics toolbar (this currently can't be turned off) No Quick Access toolbar No menu tabs No Help toolbar No text in lower left corner for Simplified Reps, Layer States, etc. (currently buried under Secondary Highlight; alternatively Temporary Shade) No Spin Center Pre-selection Highlighting turned off Navigator and Content Viewer collapsed Message Area collapsed Retain ability to display Combined Views in tabs at the bottom of the screen Essentially, it's the Graphics Area only, with the ability to manipulate the model (spin, pan, zoom, etc.). Then either a Function Key, icon, or RMB would allow the user to
Is it possible to create a function which allow to see full scale model on a screen?Usually you can zoom in or out but if I want to see how the real model looks like there is no such option.I understand that the full view is limited to a monitor size; therefore my request is relevant to small parts only.It would be helpful to have a button to change a view to real size (for instance a shaft of 1 inch diameter by 2 inches long is shown on the screen in real dimensions).
Currently there is no way to measure the distance between individual toolpaths.Also you can not measure the distance between the tool path and the geometry.Such functionality is very helpful to program the geometry, and also available in other software packages.I refeer to call 12861291
It should be possible to define parts as virtual parts in a Creo assembly, meaning that the definition of the parts is managed and stored within the assembly file (.ASM) itself instead of an external part file (.PRT)This is very usefull when working with large weldment assembles and there is no requirement to manage the individual parts in terms of Windchill, separate drawings, revision etc.This feature currently exist in Solidworks (together with other features such as multibody parts, weldment assy. etc.)
Would like the ability to add information from a PDF file onto a drawing sheet. Example a customer sends me a drawing in PDF format (they have no other file type). I do some design work that needs a drawing to represent the changes/design along with the customers provided information. If I could import the customers information into my drawing (as draft entities) then I only have one drawing file to manage.
Within style feature be able to mirror an already created curve or surface to capture and analyse the curvature within one feature as being developed.
Turn drawing dimensions unregenerated when the reference is no longer viewable in the drawing. Or at least create an option to make drawing dimensions behave this way.Example of current functionality. Part created with an extrude, create a drawing dimension showing the length of extrude.Next create a second extrude that cuts one of the ends off or add material . Notice how dimension stays YELLOW (Regenerated). Dimension in GREEN shown to show the change.This is a major issue. There's NO indicator for someone cleaning up the drawing to know the 30.000 dimension is wrong. Very easy for parts to be scrapped because of this.Please vote for this idea.
Backing into this request, Using Save As in Workspace there is the ability to Save AS and create a new number for all items in a structure and they all will be in the new structure. Also has the ability Update Parent assembly. And this is great because all of the assembly constraints remain, and annotation remain because it keeps the association of features. However, often times, users will create a copy of a lower level component but not use the above process to keep higher assemblies in line with configuration requirements. I'd like the ability to replace a component in an assy (was was a copy of the original) and have it maintain associations. Replace Un-Related component in Creo is essentially the same as deleting item and replacing, which requires all the work for assy constraints and drawings.
Provide a config option or change the standard to round the secondary unit tolerance rather than truncating.
Bonjour,Pourquoi l'export des nomenclature est limité à 80 caractères ?Serait il possible d'augmenter cette limitation afin de pouvoir exporter tous les paramètres utiles et les éditer dans un tableur.Pour le moment à part faire du copier/coller de plusieurs fichiers pour les assembler, il n'y a pas de solution !Il faudrait améliorer cette fonction !
This is about large assembly's "Save a Copy". In some case, we want to make a copy just only TOP assembly. Currnetly, "Save a Copy" fail when there is un-regenerate model as a component. (CS44975) And we need to make a copy for the model which have a external references.
There are various good reasons to use assembly cuts in your models; and there is often a necessity to use surface regions when setting up a Simulate analysis. Unfortunately, at present this is not possible as I believe surface (and volume) regions must exist at the part level. A method to enable creation of surface regions on a surface resulting from an assembly cut would avoid the need for clumsy work-arounds such as duplicating the assembly cut geometry in each part (thereby losing design intent), or exporting the assembly as a STEP file before re-importing it and analysing it as a 'dumb solid' (thereby losing parametric capabilities).
This window is the bane-of-my-life ... - why oh why cant it remember any options that I select ?Ive probably clicked Show Element Edges a million times, Deformed another million and scaling the same.And this is not just the Display Options tab - the others are just a bad.Also what is with the OK button functionality- if you select OK when editing a window it deletes the window !- if you select OK when copying it does nothing.- OK and Show are in BLUE which suggests you can center click to accept - but NOI don't know who PTC consulted when they reworked the RESULTS interface but it wasn't anyone that uses it - PTC needs to get something sensible going on here
For the Illustrate, trees of the sBOM and the eBOM are displayed parts and assemblies with randam order, if at all their name are named with numbering. Therefore, I am experiencing hardships to find the necessary parts or assembly. So, I want the method of arranging for those trees to displayed parts and assemblies. (ie. arranging in alphabetical order) I think more better that method has be able to arrange in the order of 'assembly' and 'parts' in these trees.
Please give us the option to make Legend values persistent. How many times have you worked on an assembly and wanted to Isolate a component so you can see the stresses, strain's, or displacement completely around the component only to have to re-enter the legend values again? Please make this enhancement available for all analysis types and design studies. Very annoying when you are trying to switch between different load cases for both a component or assembly. Currently if you edit the results window definition the legend values rest to their defaults. Need the option to make the values we type in persistent (non-changing). Verified not in Creo 2 & 3 Thanks, Don Anderson
Hello an all and Mrs of PTC Much of training of PTC Creo Parametric the students ask me about Symmetry Function When we forget to put some function inside symmetry function, you have that delete or cancel symmetry function, and begin of new. It would possible that inside the symmetry function display the functions chosen in model tree and you can add or remove this functions. Thanks for all, Gorka Garcia Consultant Engineer (PLM FEM CAD) Integral Innovations Experts (Partner PTC Spain)
Give users the option of putting the early features in a "header" that remains at the top of the tree when scrolling in a long feature list.Similar to using the "freeze panes" command in MS Excel
In Creo Parametric, to check for interference in an Assembly by considering the upper/lower dimension tolerances of components, it is now NOT possible to select multiple components to make all their dimensions upper /lower bound. It is only possible to select select multiple dimensions one by one which becomes a tedious task in a large assembly.The capability to select component (s) to make all their dimensions upper/lower bound will make the interference analysis of assemblies a much faster and easier task.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.