Recently active
I think it would be useful to have a 'back' button when searching for an instance within a model with a family table when using the File>Open command.Currently if you 'browse' to the wrong level of a multi-level family table you can't go back up the levels to allow you to search a different area. You have to cancel the File>Open command and start again.
be able to create an accurate profile of the geometry using the silhouette mill window feature.
"In IsoDraw 7.0, Save As will default to the folder where a particular file was retrieved. In 7.1, ‘Save As’ defaults to the last navigated folder"Nous voulons avoir la possibilité de changer ce paramètre dans les prochaines version et ainsi pourvoir faire un "Save As", "Export" etc ... et tomber directement dans le dossier du document ouvert comme c'était le cas en version 7.0
Creo n'indique pas l’affichage des ’’ pour les cotes en pouces alors que ce symbole est universel pour reconnaître l'unité !!Cdlt
Standard parts will never cut into views. If you such parts exclude they still display as outline in views with full (unfold) cross section. That’s not like the ISO Standard.
Hi,Why file == > close window icon in Creo Parametric 2.0 is a "folder" icon, can you replace it back to a cross icon?Its not logic, because its a cross icon in Pro/E wf4 , and Creo parametric 3.0 also its a cross icon.This folder icon is very disturbing for the new users, as they click by inadvertence on the "folder" close icon when wanting to open a file.Many of them are asking for the return of the old one.Thanks in advance.
Hello, we need DWG/DXF Export JPG as embedded pictures from Drawings (act. export JPG Files per File)Based on CASE CS208576 & C12593543Michael Engelhardt (IT Manager CAD/CAE)Mitsubishi Hitachi Power Systems Europe GmbH (Germany)m_engelhardt@eu.mhps.com
ich möchte hier die Kundenwünsche deponieren:Ich bin Nutzer von Creo Elements Direct 3D Access. Ich arbeite im Managementbereich und nutze diese hervorragende Software vor allem als Viewer, für Präsentationen und zur Erstellung von Dokumentationen (Screenshots). Ich nutze sie NICHT zum Konstruieren. Ich komme gut damit zurecht, bis auf 3 Punkte welche mich ausnehmend stören: 1. Farben bearbeiten Ich möchte zur besseren Darstellung in Dokumentationen gerne die Farben von Teilen ändern. Dies ist leider nicht möglich. Mit dem Workaround über das Rendering-Modul ist dies zwar begrenzt möglich, aber sehr umständlich und sehr eingeschränkt. 2. Facettengenauigkeit Je nach dem wie der Ersteller des Modelles die Facettengenauigkeit eingestellt hat erscheinen runde Bauteile rund oder als Polygon. Bei niedrig eingestellter Facettengenauigkeit sind Screenshots für Dokumentationen hässlich. Ich möchte die Facettengenauigkeit einstellen können 3. Strukturliste bearbeiten Die Strukturliste kann nur s
Hi,I have an idea about Auto Backup at Working directoryIn my current organizations we work on very heavy Assemblies , on working upon them we might forgot to save & hence it Creo Crashes away.After above incident we think 'I would have save' , hence Once again we start doing it again.I think this case is common to all the Creo users .I request to PTC to create one settings such that what ever we are working on part or Assembly after a interval of 5 or 10 min , it takes Auto Backup.
We want to display the X direction of Principal axes.Now is indistinguishable of XYZ.
A few versions ago the little green triangle "play" button was added to the UI. The addition of the triangle adds many clicks to my day, as well as having to redo many operations because nothing was reminding me to switch an option. I don't believe the green triangle benefits me in any way, but often frustrates me.For instance creating a copy of a part, but wanting to use Mate Align to position. Preselect a part, right click, Copy, click on the green triangle, mate align...For instance align a face with offset. Preselect a face, click align in the mini-tool, click the Ref Face, click on the green triangle, enter an offset.For instance position a part using Mate Align. Preselect a part, click Position in the mini-tool, click on the green triangle, click Mate Align...For instance pull with draft. Preselect a face, select pull face from mini-tool, click on the green triangle, add Draft Angle...For instance creating a copy of a part, but not immediately realizing I'll want to change the ow
We would like to be able to 'Copy' a view within an Annotation drg.The reason is to show different iterations of an assy, using a copy of a detailed view. For example, we would like to show an assy with an ASME flange, ANSI, JIS etc... The parts in the assy can be established using Configurations (drawlist) - or even to a degree, Manage Views. Unfortunately at the moment, each iteration requires all the detail to be 're-added' (duplicated) in each view.This may also require some suggestions relating to the way that dimensions are recognised on views with configurations....!
Add ability for the Repeat command to include assigning all placement and orientation constraints related to a component that has Mechanism Joint Definitions assigned to it. Currently for example a component that has a cylinder joint defined. When you place the component using the repeat command you are only given the option to select the insert surface for the cylinder. You are not allowed to select or defined the translation reference or rotation reference if it was previously defined in the component you are repeating. This issue exists in Creo 2 and Creo 3 Parameteric Only allows you to select axis alignment Notice translation and orientation are fully defined in component previously placed that the repeat command is being used on below.
When creating a solid hole in Creo (or Pro/ENGINEER) the system will generate a cilinder that consists of two separate halves. Why?The problem is, when exporting to STEP or IGES or whatever format, these holes are also exported as separate halves. When exporting is done in order to import it into a CAM solution other than Creo, this creates a problem.When creating a cilindrical extruded surface, the system generates only 1 surface instead of two. Why then creating 2 halves when extruding as a solid???It would make sense if holes are generated as 1 surface, instead of two.
What if we had the ability to create curves or sketched lines using extrudes as the basis, or convert a solid to just edges. So if you make a standard cube you wouldn't have a solid, or surfaces, but curves for all the edges. The biggest example I have is we make a lot of frames in AFX. To get all the sketches to build the outside of the frame you often have to make multiple planes, multiple sketches just for a simple box. Though if you could make it in extrudes to define the space claim first it would be easier to create. A box is the simplest example, but any extruded shape could be done this way. In theory even spheres could be cut into quads and given sketch lines. If sweeps are also able to do this, here's an example of a model I created as a mock up for a presentation that took way too long to create each edge and each sketch. It was done with 3 sketches and many curves based on points. It could have probably been done with 2 sweeps, not counting the star pattern in the middle. T
I think that PTC should consider adding a config option to fix an issue that bothers most current CREO users.Out of the box, when making components transparent, the edges wind up faded (grayed out). It is not a pleasant thing, especially when dealing with multiple components in an assembly, and many of those components are transparent....image is muddy, and generally unclear.I believe that PTC should either make the default mode to be black edges only (when that option is chosen from the view type icons) - or- At least have a config option that allows black edges to be the default mode, while making surfs transparent.https://www.ptc.com/appserver/cs/view/case.jsp?n=12600723The work-around that is shown below is just too cumbersome, and fairly silly. My neighbor, who uses U.G. gets a good laugh at how ugly Creo's approach to transparent edges are.Nice crisp black lines is what the engineering community wants.......It will be very much appreciated by all once this fix is introduced, (des
It would be a tremendous benefit for all Modeling users with the effort to grow towards PLM with Windchill, if the PTC Creo Elements/Direct Modeling integration to PTC Windchill via the Workgroup Manager would be capable to open "none native CAD files" from the workspace like e.g. the Creo users can do it today. Please see the below comparison of the 2 different File open dialogs. In the PTC Creo Elements/Direct Modeling dialog only Modeling related files can be displayed, where as in the Creo App's Parametric and Direct, the all file types toggle is available. Both screenshots view the same Workspace.View of an Workspace for a PCT Creo Elements/Direct Modeling user:Only the Modeling related files are available.The same Workspace for a Creo Parametric & Direct user, All Files are available:Thank's for voting!
This is currently a limitation because there is no option available which will change the orientation of an underlined reference line in Drafting and / or Annotation. The underline reference line is Always created from left to right. The new option can be useful to create the underline from right to left. LINE
When a partial view spline is needs to be moved a little, you are required to redraw the entire spline. I would like to see the ability to move the points defining the spline for making adjustment to the outline of the view.
It should be possible to assign a cylindrical surface (e.g. bore) with several different colors, using for example a sketch. There should not be created an additional surface and the color should also remain after exporting a step file.
Durch die Nutzung von Children Handling werden vom Anwender Referenzen gezielt zugewiesen, ersetzt oder gelöscht.Dies kann der Anwender mit der Option „Edit References“ für die meisten Feature machen. Wird zum Beispiel eine Datumplane gelöscht, auf die sich auch eine Xsection bezieht, steht die Funktion "Edit References" nicht als Menüpunkt unter dem der rechten Maustastenmenü zur Verfügung.zu diesem Problem ist auch schon ein Case C12607489 gemeldet worden.
Could be useful to show a circular axis for a direction pattern, like axis pattern.
The request is to allow the users to select radial pattern circle as a dimension reference.N.B : This Idea was created after the request of Mr. Alexander Kirillov
I would like to be able to have Text in a 'Box' Frame to be able sit on top of Geometry (as displayed in the images below): --> ThanksBarry
Please add the ability to pause analysis and design studies to allow them to be moved/copy to another faster workstation/computer when the hardware becomes available.This will allow one to take advantage of computational time that has already taken place and not have to start completely over.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.