Recently active
If you insist on having a 3D solid model, consider redesigning the joints where they all have smooth transitions with rounds. In reality, these joints will probably be welded. With a 3D model, you will also generate a lot of elements, especially for thin walled tubing. If you're wanting to analyze the stresses in the tubes, I would still consider using the Beam Tool. It's much easier and will run quickly in FEA.
Just to confirm your post, here is a screenshot of the available processors and prices for the Dell 7710 from the Dell web site (5 selections):
Yes...I saw where you mentioned that you haven't obtained one yet...that's why I was asking. The PCs that you have played with are built for games. I was wondering how well Creo 3.0 will perform on them. I almost pushed the button to order my Dell 7710, and I read this post. So that's why I was asking about the Sager. So I went to their web site for additional information, and I didn't see where you can configure a laptop workstation with Xeon processors, but maybe I need to got back and look again. So...can you get a Sager laptop workstation with Xeon processors? Thanks for the reply.
Also, have the option to change the color of the glass.
Or maybe there can be an option to control the number of glass planes. For example, as you create datum planes, let there be a check box to allow for glass or wireframe, etc.
Maybe there can be a config option to set just the default planes as glass and the other planes as wireframe, etc. Just brainstorming. I wrote the datum plane names on the plane for fun, as I didn't see any tool to create the text that I really wanted on the plane. Actually, these aren't planes in Creo, they are surfaces just to project the idea.
LiveWorx 2016 reimagines the world-class conference for product development and service professionals, PTC Live Global, as the world’s largest Internet of Things (IoT) event. Engineering IT professionals will gain real-world tips and product development best practices to drive efficiencies, save time and costs, and improve quality at LiveWorx 2016.For Ken Abbott, Global CAD Tools with a large oil equipment manufacturer, attending the 2015 PTC event allowed his team to make suggestions for future product releases. The LiveWorx 2016 Event Team interviewed Ken to hear more about his experience, and what you can expect this June. Registration is now open, so take a look at what Ken had to say and plan to join us June 6-9 in Boston.LW: What PTC solutions are you currently utilizing?Personally, I have been working with PTC Creo and Pro/ENGINEER CAD technology for over 20 years. I attended my first PTC/USER conference in 1995 and I have attended more than half of them since then.LW: What were
New takes on a few things: obsessive customer focus pushes innovation (cart now will be leading the horse) & collaboration to innovate (cautiously)...Darmstadt, Germany-based Software AG, www.softwareag.com, an enterprise software company, shared its predictions for the manufacturing and supply chain industry in 2016.Based on his expertise, market observations, and customer interactions, Sean Riley, global manufacturing and supply chain solutions director, Software AG, notes 2016 will be a year with opportunity and uncertainty, and there are six key initiatives manufacturers will need to adopt to be successful.First, digital transformations will drive growth and profit. Manufacturers will adopt technologies in the coming year that will allow them to transform their operating models and digitally connect processes, events, actions, internal associates, and external partners. Additionally, information about product usage, production capabilities, customer requirements, and market req
A great idea...need more votes.
Something like this...
Hi Bernie,Have you actually used the NP9755 or NP9775 on a daily basis?
I used one license in my post, and I don't have that problem.
Andrew,Sometimes I get the same problem, even after the software was installed properly and running for several weeks. When I restart the PC, it corrects the problem.
Teofil,Have you considered building your frame with the Beam Tool in Simulate? Since the chassis is made up of tubes, this can be done easily. The problem I see with your model is that it's not modeled for FEA, and I can see why you can't get it to mesh. If I was going to analyze this, I would make points and curves and use the Beam Tool.
Vložení pole děr pomocí uživatelem definovaného prvku a makra.Implementaci a technickou podporu systémů od firmy PTC v České republice provádí AV ENGINEERING, a.s.ww.aveng.cz
Hi PSAB,we would like to refresh this topicSeveral new ideas already exist or will be created to improve current behavior. - Suppress history in the email - 2 different emails : one internal and one external - improve the way how pictures and attachment are managed in the systemAs representative of the community, we would like to get your point of view and the one from your colleagues regarding the utilization of -.In addition to the 3 topics listed above, there could be others to submit to Ops.Because it is a global topic, we would like you to get in contact with Core team as well (including Rabat).Here some TSEs name identified to work with you on this topic : Manar Elouataoui, Othmane Elanmati,Hicham Lafkir, Karim Akhssassi, Ali BoumrahMaybe Vincent could collect feedback from Aix office, Fred to contact Rabat's team. And for the German Offices, maybe Thomas could work with Unterschleißheim office and Linda with TS Stuttgart office ?Here the link to ideas we would like to promote :v
Leonardo,I tried to replicate the same type of problem, but I couldn't. Perhaps I'm not understanding your problem. I have two Creo Parametric windows, and when I activate one or the other, my model tree does not scroll to the top. I'm using Creo Parametric 3.0 M070. Can you upload a screenshot of your problem?
You modeled a chassis in Creo Parametric using the Framework extension and you attempted to mesh it in Autodesk Simulation (formerly ALGOR), and I assume you tried to mesh it with h-elements. If you have Creo Simulate integrated with Creo Parametric, I would attempt to mesh it first in Simulate. You also have Creo Simulate Lite, as it comes standard with every Creo Paramteric. The automesher in Creo is AutoGEM, which is geometric mapping of the elements using p-elements. Your error code states that you don't have a watertight solid, so it sounds like you have some surfaces in your model. Surfaces in Creo have a lavender color by default. If you can upload the model, I'll be more than happy to examine the geometry, providing it's not a Student Version of Creo. If it is, try uploading some screen shots.
Please see the below image on how to create an angled datum plane. This was created in Creo 3, and it is the same for Creo 2.
Implementer 11.2 Installation & Administration Guidehttps://support.ptc.com/view?im_dbkey=168018Pages 162-163 "ICTLSVR Command Parameters""The appropriate IBM Licensed Program for Java 5.0 must be installed to run the ImplementerServer on the host system."I'm hoping that is out of date documentation.The ICTLSVR command says that *DFT Uses the system’s default JVM.Is this how I determine the default JVM?http://www-01.ibm.com/support/knowledgecenter/ssw_ibm_i_72/rzaha/rzahainstalljdk.htm?lang=en4. Set the JAVA_HOME environment variable to the home directory of the Java Development Kit that you want to use. At a command line, enter one of the following commands: ADDENVVAR ENVVAR(JAVA_HOME) VALUE('/QOpenSys/QIBM/ProdData/JavaVM/jdk60/32bit') ADDENVVAR ENVVAR(JAVA_HOME) VALUE('/QOpenSys/QIBM/ProdData/JavaVM/jdk60/64bit') ADDENVVAR ENVVAR(JAVA_HOME) VALUE('/QOpenSys/QIBM/ProdData/JavaVM/jdk70/32bit') ADDENVVAR ENVVAR
This IoT Roadmap forecasts some of the emerging technologies that will transform brand and consumer interactions in the years ahead.
10 things you need to know about IoT and how it will affect the future of industries and consumers.
Flatten the model and use the Measure tool.
Hi,I wan to learn more about the Tolerance Manager.Can any one guide me about this with useful tutorial.Thanks
Pokud často řešíte nastavení šrafování v PTC Creo Parametric, může se vám hodit tento způsob práce.Implementaci a technickou podporu systémů od firmy PTC v České republice provádí AV ENGINEERING, a.s.ww.aveng.cz
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.