Recently active
Good day Gentlemen,Here are some number for you. This graph is is questions and responses / answers for the month of July by product segment. I see question volume taking a dip, but that is historical and expected for this time of year.This chart shows types of membership and I am happy to see we are moving in the right direction; as discussed in our meeting, Contributing member are the gold. Since our meeting, I have been asking other community managers about answer rate and how do they get customers to indicate which answer(s) helped the most. As you can imagine, there is no perfect way and most managers / moderators are marking answers correct on behalf of customers. Work in process for PTC 🙂Thank you again gentlemen for your help; let me know if there are other stats you would like to see.Best,Toby
Hi,I've tried to start the 30/120 day trial instance but the status has remained as 'none' and nothing seems to have happened.Would be good if someone from the ThingWorx team can take a look at this.Thanks
Ketan,Try this. I created an IGES file from your test part simply by selecting the following geometry option in the export IGES dialog. This is the simplest and quickest way. You don't need to use Copy/Paste to achieve this.
Perhaps you could use control points to prevent that.
Even if Creo could flatten the oil pan, this would not give you the amount of material required for the deep drawing forming process. If you don't already know how it's made, I've attached a white paper on this very subject. After the oil pan has been formed, a laser trims off the excess material.
Are you trying to make leaders in model mode or drawing mode?
It appears to me that you could Boundary Blend the curves in your attached image.
That was the only drawback I saw, that is, the attached instructions are for Boundary Blends, not Swept Blends.
Tablet-based augmented reality helps predictive maintenance for pumps | Control EngineeringAugmented reality monitoring of machine assets and predictive maintenance became reality in a NIWeek 2016 stage demonstration (see video), a collaborative effort of Flowserve, PTC ThingWorx, Hewlett Packard Enterprise, and National instruments. A Control Engineering video clip from NIWeek 2016 showed how sensors on a mountain bike might be adapted for machine maintenance. This pump demo starts at a U.S. refinery in a few weeks and is on its way to commercialization, according to Eric van Gemeren, Flowserve Corp., vice president, research and development. Commercialization expected soon Flowserve hopes to offer the product commercially "in the very near future, as soon as humanly possible," he told Control Engineering, since customer profits are directly proportional to uptime. Eric Starkloff, National Instruments, executive vice president, global sales and marketing, noted that this Indust
Commands Added to the RibbonPreviewingPositioning ProfilesMoving Multiple ProfilesWorking with Joints is EasierPoint Pattern Command is Added to the Ribbon
John,Someone posted a real-world problem today concerning influencing curves.https://www.ptcusercommunity.com/message/461206#461206
Paul,I've attached some instructions on how to use influencing curves along with the two models used in the instructions. I haven't attempted this with your type of problem, and I hope this will give some insight.
The text adjustment is set to the center (5) at the same time.DEFINE Txt_chg_position_boite LOCAL Cloture LOCAL P0 LOCAL P1 LOCAL P2 LOCAL P3 LOCAL Pt LOOP READ PNT "Select the text to move" Pt READ PNT "Select the lower left corner of the box" RUBBER_LINE Pt P1 READ PNT "Select the upper right corner of the box" RUBBER_BOX P1 P2 INQ_ENV 1 LET Cloture ( INQ 2) INQ_SELECTED_ELEM TEXTS PICK_VP_PNT Cloture Pt LET P0 ( INQ 101 ) CHANGE_TEXT_ADJUST 5 PICK_VP_PNT Cloture P0 LET P3 ((P1+P2)/2) MODIFY MOVE P0 P3 PICK_VP_PNT Cloture P0 END_LOOPEND_DEFINE
In the real time rendering in Creo 4, how do you rotate the scene image to match the model orientation? In the attached picture, the "tank" is lying on its side. How do you rotate the scene to have it the right way up? Aside from redefining the component placement in the assembly, its not clearly evident.Thanks.
Automatic Recognition of Rounds and Chamfers Created in PTC Creo Elements/DirectRecognition of Additional 3D Model Attributes from PTC Creo Elements/DirectAssociative Drawing Import from PTC Creo Elements/Direct ModelingImport Validation ToolConsolidated Conversion FilesSupport for PTC Creo Unite Technology for PTC Elements/DirectHigh Definition RepresentationVisualization RepresentationExport an Assembly as Structure OnlyEnhanced Support for VisualizationProduct Manufacturing Information (PMI) Support
Internal Transformation for IoT Business Model Reshapes Connected Industrial Vehicles"We have created an awareness on internet of things in all the business units of the company this was the first step toward the changes necessary for the future of precision agriculture"Antonio Marzia,Vice President Precision Solutions and TelematicsUltimately the CNH Industrial vision is to ensure that its customers view the vehicles as an important part of an ecosystem, interacting with logistics, fleet management,field optimization systems and third party providers. "The goal of the data services is to provide the end customer the answer to the big question: how much is the cost of the vehicle, how much is the cost per acre, per hour, or per kilometer of my system,” Marzia said. And the customer wants to know what is the best decision to make to improve the costs per unit.” As the telematics strategy evolves, CNH Industrial will examine more transformative business models based on performance guaran
You have now uploaded three different models:1. testpart2. updateda3. updatedI provided solutions to testpart and updatea. I have no idea what you're trying to say concerning updateb. The problem I'm having with this thread is that you keep changing/uploading different models instead of trying to solve one model.
Doesn't the first surface contain the outline highlighted in green? See below image.
The first surface is the entire outline, so that's all you need.
I took your part, save it as another prt file, then deleted the bottom two surfaces before exporting.
This one should do it.
I've attached the IGES. All you have to do is delete the bottom two surfaces in the model tree and save it as a wireframe.
That's a different model from the first one you posted.
Here's what I'm getting from your testpart.prt.
I'm not getting those. Try importing the IGES file I uploaded.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.