Recently active
After exporting a drawing file to pdf, I noticed that the edge lines vary in thickness. Is there a fix for this?
Which happens to be M120.
When I print the drawing on paper, all the lines are uniform.
Okay....then how can it be in the export data?
I used CTRL + 5 and that corrected it. So it must be the reader and not the export settings.
The image I attached is at 100%, and the lines are very obvious. At 400%, it almost disappears.
David,Acceleration connections (G3) only comes with Interactive Surface Design (ISDX), as shown below. The new Creo 4 Help Center under What's New, has a demo for G3.
Use the latest date code.
United States Air Force Aims High with an Optimized Supply Chain Strategy | PTC
I think you cannot mesh it because you don't have a 3D solid part. To test this, try to cut open the part with the extrude feature.
Hello Babu,After creating surfaces, I would recommend running a reflection analysis to check for continuity. You're using Creo 3, and I have attached a screenshot in Creo 3 to show you where to use it. Creo 3 only goes up to G2, but with Creo 4, you have G3 capability. You will notice a slight disruption in the reflection lines. With Creo 4, you should be able to smooth this out.
Just curious if anyone else has gotten any email notifications? Mine seemed to have stopped Friday evening. My stream seems to be working fine.Occasionally IT adds new rules to catch spam and I'm wondering if the community has been blocked or sent to the spam filter (I'll get the spam notification in a day or 2).
Did you see last week's press release? 2016 was PTC's most successful year yet in the IoT space. This new press release summarizes all the success PTC has had in the last fiscal year with our IOT platform. We crossed $100M in sales with 115% growth and at 1200 customers. This press release has several links to additional information including HBR articles, analyst reports, partner success, etc. that is worth exploring and sharing with others. http://www.ptc.com/news/2017/ptc-delivers-standout-year-in-iotIf you have any questions please feel free to reach out to your partner manager or you can contact your partner success team TWXPartnerSuccessTeam@ptc.com.
Thanks.
I will work on this next week.
Scroll up until you see my Dec 7, 2016 post. It's attached.
North America Tech Support Advisory Board (Community Site) Quarterly Update for Q1
Good day Gentlemen,This post is a thank you to all of you, but Stephen Williams was the catalyst.Please take a look at this idea: Here are some new Ideas I would like to introduceI am calling out Stephen's actions, but I have seen you all providing help and guidance to fellow members. Sometimes it's not simply providing the final answer, but helping junior users with best practices and showing them the best way to use the tools. By teaching others the right process(es) and setting the right expectations, we create smarter users and a stronger community.Thank you for all for your help.Best,Toby
Israr,I cannot retrieve your model, as shown below. I'm using Creo Parametric 3.0.
LiveWorx 2017 is the perfect opportunity to get your company into the spotlight and position your name as an industry thought leader. A sponsorship at a conference as large as LiveWorx offers many more benefits than just putting your name on a sign. Here are a few benefits to consider: Face to face with 6,000 members of your target marketGain new contacts and lead generationEngage prospects with hands on demos of your technologyXtroplis (LiveWorx Expo Hall) is open during the full hours of the event A marketing impact that spans from before, during and after the eventPresenter opportunities with digital and printed promotionsThe full sponsorship prospectus is attached for your review. For further information simply reply to this post or email Dave Burnell at dburnell@liveworxevents.com to discuss your best options.
If you have access to YouTube, there are a lot of free videos that are very helpful and will show you the basics.You can view free videos from PTC at:http://learningexchange.ptc.com/BWIR has free webcasts at:http://www.barry-wehmillerinternational.com/user-resources/webcastsYou can sign up for these free webcasts, plus they're on YouTube.
How long have I been on this forum again?Seriously, I logged in and I was trying to find the tab to go directly to the posted Ideas.If I was new to the forum and I had maintenance, how long should it take me to find the Ideas section?As a seasoned user, I cannot.tom
Common questions and answers for new members just getting started with the Group and with PTC Communities. Hyperlinks to step by step instructions for alert and email setup are included.
This is a frequently asked question in the community and usually the answer is to use a script or to use some kind of programming.This can be done just with mapkeys, with some limitations:The method I used was:1 - Create a mapkey to create a new drawing. The problem here is that the mapkey records the name of the drawing used this time and it will repeat it next time we run the mapkey.So I replaced the line where the drawing name was with a nested mapkey that I will create next.2 - Now I need a mapkey to get the name of the active part. How?This can be done several ways, I preferred to save a dummy file just to get it. I created a mapkey to save a ".pic" file since we never use files of this type and it can be generated from parts and assemblies.Then added some old "dos command line" to get the name of the pic file, delete it and generate a text file with a mapkey with the line I deleted from the previous mapkey plus the captured filename.This will be the nested mapkey.3 - I need a thi
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.