Recently active
Již včera bylo možno stáhnout první uvolněnou subverzi PTC Creo 3.0 (F000) ze strínek výrobce ptc.comPro spuštění potřebujete aktualizovat licenční soubory.V případě potřeby kontaktujte AV ENGINEERING, a.s. youtube
Jusr its my time pass..... to forget......still more to be changehttps://www.youtube.com/watch?v=hssIU8-AXyM
I ran the model, and I think the reason all of the fasteners are positive for axial force is that the plate is trying to lift off the block at every fastener location. You have a 200kg mass at the top which is offset from the center of the support beam, creating a moment to lift the base plate off the block due to a gravity load. I deformed the assembly at 30% to illustrate this, as shown in the three figures below:Figure 1: Deformed With OverlayFigure 2: Plate Lifting at Each FastenerFigure 3: Plate Lifting, Deformed and Overlay
Okay...and thanks for the info.I'm very curious to see if I can import a ".model" extension from CATIA V4.
I'm downloading it today, and I want to see if it will open CATIA files, as they claim.
Sean,You stated that you cannot share images or the .asm/.prt files, but you could share following files:Run Summary file, ends with .rpt, automatically generated.Study .pas file, automatically generated. You must review this if you're using contact.Diagnostic file, .txt. You have to save this yourself..stt fileThe iteration status for contact analysis is listed in the study .pas file, the .rpt and .stt file do not give this information. Sharing these files will give your audience some insight to your problems. If you're having this much trouble running in Creo Simulate, you will more than likely have problems with ANSYS.See the below images:
Example, to change by increment of 15 degrees (if degree is the current unit): Hach_chg_angle_inc 15DEFINE Hach_chg_angle_inc PARAMETER Increment LOCAL Cloture LOCAL Pt LOOP READ PNT "Select hatching for changing the angle" Pt INQ_ENV 1 LET Cloture (INQ 2) INQ_SELECTED_ELEM HATCHING PICK_VP_PNT Cloture Pt CHANGE_HATCH_ANGLE (( INQ 4 ) + Increment) PICK_VP_PNT Cloture Pt END_LOOPEND_DEFINE
PTC Creo Parametric 3.0 také nabízí nový a výrazně zlepšený systém nápovědy, využívající Google® indexaci. Help je nyní plně přístupný na webu a umožňuje kombinovat a vyhledávat adekvátní informace včetně informací v PTC Learning Connector, který byl integrován v PTC Creo Parametric 1.0Obsah je nyní dynamický a provázaný s databází PTC, servery Youtube a sadou videotutoriálů na Learningexchange.ptc.com Můžete si jej vyzkoušet nahttp://help.ptc.comDodávku a technickou podporu včetně školení PTC produktů v České republice zajišťuje firma AV ENGINEERING, a.s.www.aveng.cz
"I see Visualization driving everything..." says Lance Lie from Raytheon who I had the opportunity to meet with at the recent PTC Live event in Boston. Here's an interesting perspective from Lance about Visualization technology, benefits of using the technology as well the future of Visualization. Continue Reading....
PTC Creo Parametric 3.0 obsahuje rozsáhlou knihovnu spojovacích materiálů s jednoduchým a intuitivním roz hraním. Při vložení dojde k umístění příslušného šrou bového, či kolíkového spoje a zároveň se automaticky vytvoří příslušné otvory, včetně vůlí a závitů.Nový katalog 3D objektů, umožňuje snadno nalézt požadovaný model a přímo jej vložit do PTC Creo. Vyhledávat je možno pomocí:Textového řetězceVložením 3D STL tvaruNáčrtem tvaruVyzkoušejte jej na http://ptc.partcommunity.comDodávku a technickou podporu včetně školení PTC produktů v České republice zajišťuje firma AV ENGINEERING, a.s.www.aveng.cz
What part in this 20 piece assembly is of primary interest?Don't use any AutoGEM settings on quick check. Just use the default settings to reduce the number of elements.What does the diagnostic tool state after a crash?How many components are connected with fasteners? You're using a combination of solid fasteners and fasteners from the fastener tool.Are you using any contacts?It sounds like you have a plate that is bolted to a fixture. Seems like a simple problem.Are you looking at the stress in the plate due to a pressure load?This difficult to work without images.Creo should handle this without crashing.
Geometrický pattern v PTC Creo Parametric 3.0 obsahuje funkce, které umožní reagovat i na případné výrazné změny v geometrii. Povrchy se mohou například automaticky protáhnout k dosedací geometrii. Tím se výrazně zvyšuje použití násobení i na geometrii, u které to doposud nebylo možné. Uživatelé navíc mohou umístit referenční pattern na libovolný člen patternu, netřeba vybírat první výskyt. Dodávku a technickou podporu včetně školení PTC produktů v České republice zajišťuje firma AV ENGINEERING, a.s.www.aveng.cz
The word interrogation is a highly emotive topic and might remind you of "bad" guys, intense questioning,etc. etc. Relax.... I'm not referring to that "type" of interrogation or anything close to that.... In this post, I wanted to highlight some of the neat interrogation capabilities in PTC Creo View. Checkout my recent post on creo.ptc.com. In that post I have tried to cover a high level overview of "how" to dig deeper into your designs using PTC Creo View. Continue Reading For other tips and tricks for PTC Creo View and WVS, check out my blog here.
A ".model" file extension is from CATIA V4, so I don't know if the V5 import will work.
Creo 3.0 Unite Technology will only open assemblies, not at the part level, so I've been told. We have a CATIA translator, and that will open files in Creo, but I'm hoping Creo 3.0 will allow us to work around that.
I have had to split the main directory in two to fix this problem. Is there another way of solving this?
In diesem Workshop stellen wir Ihnen die aktuelle Version von PTC Mathcad – Prime 3.0 – vor und zeigen Ihnen die Neuigkeiten.Diese Veranstaltung ist interessant für Entwicklungsleiter, Entwickler mechanischer oder elektronischer Komponenten, Bauingenieure, Systemingenieure, Verfahrenstechniker sowie alle anderen Ingenieure und Techniker, die mit mathematischen Formeln und Berechnungen zu tun haben.Melden Sie sich zu diesem kostenlosen Workshop an - Sehen Sie Best Practices für komplexe technische Berechnungen präsentiert in PTCs Mathcad Prime 3.0 und tauschen Sie sich mit den PTC Experten und anderen Anwendern aus. Weitere Informationen und Anmeldung
Einladung zum 13. Benefiz-Beachvolleyball-Turnier in Duisburg-RheinhausenWarum nicht einmal spielend Gutes tun?Auch in diesem Jahr veranstalten wir wieder ein Benefiz-Beachvolleyball-Turnier zu Gunsten des Vereines Pro Niamilima Zaire Deutsch-italienischer Verein für die 3. Welt e.V., zu dem wir Sie recht herzlich einladen möchten.Eine Mannschaft besteht aus vier Spielern. Für die Sportbekleidung sorgt jedes Team selbst.Wir würden uns freuen, auch Ihr Team begrüßen zu dürfen.Bitte teilen Sie uns bis spätestens 1. August 2014 mit, ob Ihr Unternehmen teilnehmen wird.Spiel, Sport und Spaß und das für einen guten Zweck. Wir freuen uns auf ein spannendes Turnier und auf die Begegnung mit vielen netten Menschen bei Spiel, Sport und Geselligkeit.JETZT ANMELDEN
Do not to attempt to treat your ECAD users like MCAD users. They have much different needs and views of PLM in general says Mark Caradonna, Product Manager for PTC Creo View ECAD solutions who I had to opportunity to chat with and capture his observations of the PTC Live 2014 event held recently in Boston. PTC Live is PTC’s event for product development professionals using PTC solutions.Mark discusses trends in ECAD space and highlights of the recent PTC Creo View release. Continue Reading
Can you upload an image or the model?
I found this website when I was “googling” for “instances”. I have not tried to find my look-alikes but…Well, the reason I bring up this topic about look-alikes is because it has a lot to do with the case at hand, i.e. “instances” in PTC Creo View. This blog post discusses about identifying instances in PTC Creo View. Continue reading →
Creo 3.0 claims that it can open SolidWorks, CATIA, and NX files directly, without the need for additional software.Does this mean it will open the modeling history of these files too?Has anyone seen this demonstrated?
What does the groove cross-section look like?
I went back and watched the attached video presentation by Brian Thompson, and you're right, he only shows Unite Technology opening assemblies. Now I wonder if you can open a component from the assembly (RMB>Open) after the assembly has been opened, the same way it's done in Creo assemblies?http://www.ptc.com/product/creo/new/It will be interesting to see how this new technology really works when it becomes available. For now, it appears that you can open these native formats, but they will still be like neutral files without modeling history.
Yes, apparently. I recently found this interesting article about how Sound is one of the key elements of our travel experiences besides “Visualization”. Read on about visiting sonic wonders of the world and the 8 great places to hear…..OK… so, what has Sound and Sight got to do with your blog about Visualization of Mechanical assemblies? Well, something for sure…. Here’s my recent post about the interesting things that you can “see” and “do” with the Visualization technology and PTC Creo View in particular. Continue Reading.….
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.