Recently active
If you're going to make several holes with different diameters, they can all be made with one extrusion. No need to keep selecting the hole command.
I just LMB on the view and a dashed border appears, then RMB for further properties.
Dimensions out-of-view in sketcher mode has been a chronic problem with PTC. My "work-around" to this is that I just rotate the model in sketcher and drag the dimension inward. I shouldn't have to do that. I think I will bring this up with tech support and see what they say.I don't have this problem in sheet metal mode.
In this article, we will dive deeper into PTC Creo Parametric and take a look at enhancements and additions that are now present in version 2.0. Sheetmetal Flat Pattern Preview WindowWhen working with a Sheetmetal part, there is a new Flat Pattern Preview icon on the Graphics Toolbar that will open an additional window with the flattened model shown. The Flat Pattern of the model does not need to be present in the model. This is a “preview” of what the flattened model will look like.Figure 1There are additional icons in the preview window:Flatten FormsShow Overlapping GeometryBounding Box Sheetmetal Sketched FormIn PTC Creo Parametric 2.0 there is a new Sketched Form feature that allows you to develop formed geometry from a 2D sketch. The section is extruded to produce the basic forming geometry.Figure 2Options for this feature that can be used to further develop the geometry are:Exclude SurfacesAdd TaperAdd Rounds on Placement EdgesAdd Rounds on Non-Placement EdgesYou can also flip th
Hi Joey,Let's start with the first problem (ex1.prt.1). Here's what I'm seeing in your post:1. The shear-moment diagrams don't match your blue beam sketch because you ran an analysis with both ends of the beam fixed in xyz. The shear diagram shows -10 then +10, and that's what you get when you fix both ends. However, your example shows a fixed end and then a roller on the right side. To simulate a roller constraint, free the X translation and free the Z rotation.2. The greatest moment is in the center of beam, and this would not be zero.3. The shear-moment graphs show a beam length of 50mm, but the sketch show 5cm.4. Modeling hint: You don't have to sketch the curves to make the beams. I made the beams point-to-point. Make all your points first, then connect the points with beams in Creo Simulate. Look at the file I uploaded as an example.File uploaded.
Coping with the dynamic design processThe design process of our projects is very dynamic. It includes a lot of trial and error and goes through many iterations as it has many disciplines that all have their relevant input. The final outcome is generally a combination of multiple propositions.In the example of a plant layout for a bulk handling installation, the installation is built with bunkers, conveyors, hoppers and buildings housing process equipment. Usually such installations are connected with existing installations, surrounding our project. In some cases, our installation will be interacting with future projects and must already give an impression of that future installation.Designing a layout in 2DIn the past the design of such projects was completely executed in 2D. Plant layout was really easy in the initial stages. A bunker could be represented by a simple rectangle, the belts conveyor was copied from earlier projects and was then literally ‘stretched’ to give an early indi
Louis Gary Lamit has published some great books for PTC software. I bought my first book, Pro|Engineer 2000i2, and it was very detailed and helpful. Of course, these books are not free, but they are worth the money if you're learning. Creo Parametric 3.0 text book will be out in December 2014. Here's the link to all his works.http://www.cad-resources.com/Other_textbooks.html
Thanks for posting.
You can learn in this Short video tutorial: how to set limits for a Pin connection in Creo Parametric 3.0Regards,Vladimir
True, however, if someone wants to take a course in Creo Parametric online, you get access to that course material for one year, and then you're cut off, and you don't get to download the reading material, even though you paid for it.If you take a class on-site, you get hard copies of the material plus workshop manuals, and you get to keep it.
PTC does not offer manuals for sale unless you sign up for a course, a real on site class, not the online versions. I have addressed my concerns about this to PTC, even this past Friday, I was in a phone conference with PTC stating that they need to make their classroom manuals available for purchase without having to take the class. But I think you were looking for something for free. I don't ever think PTC will give any intro manuals for free. After all, they are in the business to make money.
Stale,Which version of software are you using? That's the first thing I would like to know. Welcome to the forum.
If you have access to YouTube, there are a lot of free videos that are very helpful and will show you the basics.You can view free videos from PTC at:http://learningexchange.ptc.com/BWIR has free webcasts at:http://www.barry-wehmillerinternational.com/user-resources/webcastsYou can sign up for these free webcasts, plus they're on YouTube.
Can you upload an image or the model?
This is the answer for Creo 2.0, but not Creo 3.0. It's enable by the option allow_flat_to_screen_note and select "yes".
PTC Community, I posted a similar question on this topic, but I didn’t address it in as much detail as I should have. Please look at the images below, as pictures will explain it all. The problem occurs when attempting to change the orientation of the note flat to the screen. But wait, that’s not really the problem. The problem is if a leader is attached to the note, the leader will disappear. I tried this in Creo 2.0 and Creo 3.0. The below images are from Creo 2.0. Has anyone been able to change the note flat to the screen and maintain the leader?
So you're just testing the AutoGEM controls and not tryring to recover any particular data of interest.
What is the purpose of making these volume regions in the base plate?
I did the same thing (just removed the material property), and it worked for me too.
I even tried to use just one component, the top component, in to Simulate, and that crashed it too. For an assembly that appears to be very simple, something is extremely wrong. I posted an image of your assembly for all to see.
I resumed all the suppressed features and it still crashed.
Jeff,I see what you mean. I opened up your assembly in Creo Parametric 3.0, tried to switch to Simulate, and it crashed.
Are all these zip files crashing when switching to Simulate?I opened the err file in notepad.
There are a lot of strings in the error file that state "could not find component".
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.