Recently active
Wir möchten an dieser Stelle gerne noch einmal auf unseren Workshop am kommenden Dienstag, 18.11. um 14:15 Uhr in Raum C7.2 hinweisen. Der Workshop richtet sich an alle, die sich zum Theme Cloud näher informieren möchten und wird in englischer (vorwiegend) und deutscher Sprache gehalten.Damit wir ausreichend Materialien vorrätig haben, bitten wir um vorherige Anmeldung, aber auch kurzfristig Entschlossene sind herzlich eingeladen!Hier geht's zu den Details: http://ptc.co/DU9ZUPTC Cloud Services WorkshopCloud Solutions Beyond the Hype: A Realistic Review of Business Benefits, Challenges, and OpportunitiesRon Pascuzzi, Vice President Cloud Services, PTC This interactive workshop will take a hard and practical look at the key questions facing business and IT leaders considering the move to cloud.Specifically, the workshop will address:Core definitions and options for cloud-based solutions Potential costs, risks, and business benefits Infrastructure and application management issues and c
It would be nice if there was a required field for posters to indicate the module, revision, and version of software as part of their posts. They could use tags, or just enter the information as part of their post, but this is unreliable.
Moody,Do you have to model the entire jet, including all systems and subsystems, or just a 3D image of the jet? For example, do you want to model a 3D surface of the entire jet?Welcome to the forum.
Frank,I've attached a couple of images on how to make a knife tip with boundary blends, and I attached the model too.
What does the train look like if you select Render Window?
Was the larger image of the train in the Render Window? Was the below circled function selected?
Společnost AV ENGINEERING, a.s. uvolnila AV ScriBatch Tools 1.3 s těmito novinkami:Implementaci a technickou podporu systémů od firmy PTC v České republice provádí AV ENGINEERING, a.s. www.aveng.cz
Roy,Are you refering to the below images? The second figure is using the render window on the same part and color.
Nice model.
As the design of your product evolves, it gets more and more difficult to understand what has changed from one iteration to the next—especially when other team members may have modified the data. With PTC Creo View, you can easily determine the differences between two versions of an MCAD or ECAD design. You can see what’s changed in 2D drawings, 3D parts, images, PCB schematics, and PCB layouts including attributes and graphic elements. Continue reading on the PTC Creo blog here.
What you're saying is that the mas properties don't update when you switch between views, as shown below:
Richard, Can you upload the model? If so, use advanced editor. Welcome to the forum.
You upload it under a new discussion, not Product Idea, as shown below:
Charlie,If you sweep just an ellipse, which has a defined cross-section, along a single curve in one plane, you will get something similar as shown below (ellipse surface). Try making a sweeping ellipse with just one trajectory. This is probably not exactly what you're looking for, but just try it as self-training for a single sweep. Sketcher has a built-in ellipse feature as shown below.
The spreadsheet will calculate it for you. All you have to do is enter the values. Very simple. It may have to be your reality if PTC doesn't accept your Product Idea.
In the design process, one should be able to calculate all masses in a spreadsheet before simulation, and then the simulation will verify if it was predetermined correctly.I've had to do this many times when simulating gravity loads.
You can certainly add extrusions to a STEP import after setting up the datum planes (if datum planes were not save in STEP output). So if you want to add a piece, just add it with any type of extrude tools you need.You can also modify a STEP import with the Flexible Modeling Extension (if you have it).
The purpose of having Idealizations in Creo Simulate is to reduce run times. By adding Idealizations in Creo Simulate, you have increased the amount of mass from 1.566 kg to 4.682 kg. What was the purpose in comparing the mass in Creo Parametric vs Creo Simulate as shown below?
Doug,Are the failed components in your working directory?
The call for presentations for PTC Live Global, June 7-10, 2015 closes on Monday, November 17. By now, I’m sure you’ve heard about the benefits, including a free conference registration. If not, view other reasons you should present.But perhaps you’re worried that you don’t have enough compelling material, or can’t devote the time required to create a presentation. Maybe you’re uncomfortable with public speaking. Allow me to put your mind at ease. First, you’ll have five months to prepare your presentation if you’re confirmed as a speaker. Along the way, if needed, you’ll receive professional coaching and support from PTC to assist you in building your slides and leading your session. Because you’re speaking about something that you do every day and are familiar with, it will likely be much easier than you think.It’s also important to remember that your peers appreciate ways to improve their product design and development that you’ve identified. New ways to streamline processes; tips,
Well...it's probably easier to draw than to fabricate.
How are you going to get an endmill tool to cut a sharp v?
Doug,RMB on the failed part and open it. What do you see in the model tree of the opened part?
In my previous post “Model Based Enterprise – Challenges and Considerations (Part I)” I talked about the cultural changes needed to realize a Model Based Enterprise (MBE). But culture isn’t the only thing that changes; processes and tools can look dramatically different by the time you transition your organization away from 2D drawings. Continue reading on the PTC Creo blog here.
Between my login and password for searching or using the PTC University Learning Exchange, my PC should be able to remember me.However, when I tell Windows to remember me, it only remembers me for that one video/tutorial! Not the for -all- the videos.This really limits my desire to use the Learning Exchange site.I don't mind having to sign into the Learning Exchange, but have it remember me globally so Windows' login works!This only works if you have once visited this specific tutorial, but if you go to another tutorial after you log out (or time out), you have to re-enter the information again. This appears to be a simple oversight in the hosting application or settings.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.