Recently active
Hi Martin,I'm currently using Creo Parametric 3.0 M020. I created a model called 123 with the default template. I then set the absolute accuracy to 0.0075 and imported the model by Model > Get Data > Import.I couldn't get the model to import directly, you know, by File > Open > Import, so I tried the method above and it worked. It took some time to import, but it worked.
What are you showing for Mass Properties (as shown below)?
Jason,If you can provide a sketch of the thread profile with dimensions, I can make this for you in WF4 and provide the instructions with screenshots. WF4 is very similar to WF3, and I don't have WF3 installed.
We’ve just launched a new tool that will make it easier for you to review everything you can expect at this year’s event: the PTC Live Global Advance Program.Within its 22 pages, you’ll learn about new features for 2015, presenting customer companies, content tracks, keynote presentations, the Solutions Expo and much more.As a PDF document or in its interactive version, this tool is a great asset you can use not only to get a quick overview of the event, but as an additional tool to justify your attendance.So be sure to review the program, highlight what’s in there for you and get approval to register. And try to do that before April 2 if you want to benefit from early-bird savings.Questions? Let us know!
Martin,I was able to import the human head into Creo 3.0, as shown below.
Implementaci a technickou podporu systémů od firmy PTC v České republice provádí AV ENGINEERING, a.s. www.aveng.cz
Die Auswirkungen des sogenannten „Internet der Dinge“ auf die Fertigungsindustrie sind gewaltig. In dieser neuen, vernetzten Welt werden Sensoren und Steuerelemente Teil des Fertigungsprozesses und der intelligenten, vernetzten Produkte, die Sie produzieren.Dieses und auch andere Themen diskutieren wir gerne in einem persönlichen Gespräch mit Ihnen auf der Hannover Messe 2015. Reservieren Sie jetzt einen persönlichen Gesprächstermin. Weitere Informationen finden Sie hier: http://ptc.co/L1n2i
Good day everyone,March is drawing to a close which means it is time for our next quarterly meeting. I will send out options for dates soon, but would like to work the agenda first.In addition to Community updates and metrics, I would like to hear from you; what questions do you have or topics you would like discussed?Thank you for your help and contributions.Best,Toby
Yes.
Lucas,The Sketch Setup is greyed out (shown below) because the trajectory drives the sweep. If you change the direction of the curve (trajectory), it will change the direction of the sweep.
Lucas,I cannot read your file, as shown below. I'm using Creo 3.0 commercial version.
Are you using a student version of Creo?
No...the curve drives the direction...you will have to change the curve.
Patrick,You've made a valid point, and I couldn't have stated it any better. It appears that the "problem" with the Product Development Team is that they do not work on a daily basis with a product as we do, and they don't appear to see the benefits of having this type of capability, and I don't believe you can convince them otherwise. It sort of hits you in the "gut", especially after paying maintenance for many years.
Gunter,The functionality was removed intentionally without submitting a Product Idea, therefore, the functionality can be restored intentionally without submitting a Product Idea.Submitting a Product Idea will not restore this, in my opinion, as I have already submitted 33 Product Ideas since May 16, 2012, and none of them have been considered by the Product Development Team.
You could do a lot of different things, like inviting your best friend or partner to a great dinner, buying a few books or movies, or recouping your March Madness losses.But what else can you do with $100? Now you can get approval to attend PTC Live Global, June 7-10, and access valuable information and expert tips from peers and PTC product experts. Because if you register now, you’ll get a $100 discount off the regular rate.But this offer doesn’t last forever. Actually, it ends April 2. So register now, and let your manager decide what to do with that $100.
Steve,If you're on maintenance, you may submit a Product Idea, as shown below.
I think it is possible. See if the below link will provide what you're looking for. shear&moment diagram - PTC Community
Hey everyone,I've been thinking about how people might use Case Status in Salesforce in different ways and that it would be nice to understand what the practical uses are for each status and develop some best practices for us as TSEs to follow. Below is what I have come up with so far. I'd love to get your feedback regarding it!New:Cases exist in this status for the short time between the creation of the case and the time cs_ptc sends the “Thank you for submitting your question to us” emailCases remain in this status when it has been created by the TSE using the New TS Case or Clone action in SalesforceA TSE would have no practical reason to set a case to this statusAs a best practice, TSEs should not be owning any case in “New” status for an extended period of timeAssigned:Cases are not given this status in any automated use caseOnly practical use of this status might be when someone QB’ing a queue assigns a case to a particular TSE who will own itCases should not be in “Assigned” sta
There's an ongoing discussion on the Mathcad forums: Re: Mathcad Prime 3.1 - PTC Community, but it does not show in the recent content on the main Mathcad page: PTC Mathcad - PTC Community. It appears then only material posted in the subforums shows in the recent content, but not material posted in the top level forum.
When you’re facing a heavy workload, or tough project deadlines, it’s easy to focus solely on those things that need your immediate attention. But it’s imperative to stop and look further to understand what the future brings. PTC Live Global, June 7-10, 2015, in Nashville, is your best opportunity to hear PTC’s overall technology vision and understand how it will impact your organization and will help you and your team plan better for the future.Don’t take our word for it. Here’s some 2014 attendee feedback:“PTC Live Global offers a venue that gathers key PTC personnel to discuss what's new, what's coming and the overall vision of the product,” Lee Hughes, Kohler Company.“Good chance to hear PTC's vision for their products,” 2014 attendee.“A unique opportunity to really understand how strategy and products are evolving,” Rob Dolci, System Logistics.“It aids in alignment of strategies between deployment and PTC's vision for the future,” 2014 attendee.“PTC Global provided a good overview
My PTC trainer is John Lee, the following images showcase the Creo work from my ITT and Degree projects, one is of a battery and control gear chamber for a Scuba Diving Propulsion Vehicle the other is for a loud speaker that houses a built in amplifier. Creo Parametric helped calculate tight tolerances for the battery and control gear chamber and for the speaker it aided CAM via the use of 3D printing the internal structure and allowing the feet and main body to be CNC milled. It also allowed for the end piece to be turned on a CNC lathe. The scuba project was inspired by a frustration with existing scuba propulsion vehicles and the loud speaker, designed for hotel chain Radison Blu was inspired by a range of structures including a Jet Engine and the London Eye. The images attached only represent a portion of the propulsion vehicle and loud speaker.
What to do when we have a major spam flood at the weekend. Like now. I sent you and Ryan emails alerting you to the problem, but I don't know if you pick up email at the weekend. I sent Ryan an email at another email address too, but I've had no response so I assume he didn't pick it up yet. I tried to find cell phone numbers for both of you, but your web privacy habits are evidently quite good . Would you prefer that Community Champions have a way to get hold of you in a situation like this, or would you prefer that it just waits until Monday morning?
I like to below link for modeling spur gears in PTChttp://www.beyondmech.com/pro-e/cad-topic-27.htmlAnother method is in the attached PDF, but more complex.
If two heads are better than one, think about the power of 2,000 to improve upon a concept. That’s the idea behind the User Experience (UX) Lab at PTC Live Global – one more reason to attend this year.Every year dozens of your peers make time to test out our new concepts and tell us how they’d apply them, and that’s how we get more ideas about how to make our products work even better.The UX Lab in Nashville is no exception. There, you’ll get a sneak peek at new ideas for PTC products, and the opportunity to share your feedback on them. Your insights will be used to improve future PTC Creo, PTC Windchill and other PTC solutions.If you want your voice to be heard, all you need to do is express an interest in participating in an evaluation when you register for the event. We’ll reach out to you to schedule a convenient time. Then, when you arrive, you’ll test drive these concepts with a PTC representative ready to hear your thoughts on each.“I personally like the UX Lab. Kim (Moroni of P
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.