Recently active
1. Existing SetupEnvironment details : the environment where the testing of upgrade has been observed is below2. Pre-requisiteBackup your existing PSM Installation folder having version 3.0Make a document of any customization made into your profiles like custom incident rules or any custom threshold values, since the rules are not carry forward to the new system 4.0Download the PSM version 4.0 installer matching your OS Architecture3. Up-gradation ProcessManual process : Manually by taking the backup of PSM3.0 followed by uninstallation and then installation of the new version PSM 4.0 and restoring the settings back from 3.0Automatic Process : Automatic by PSM 4.0 Installer [ Backup of PSM 3.0 recommended ]4. Up-gradation StepsPlease ensure that PSM 3.0 installation folder has been backed up, since any customization will not propagate into the
Frank,Isn't the N-sided functionality for more than four boundaries? The corner blend has only three. BTW, the Product Development Team disabled this functionality, and you have to enable it to use it, as stated in the attached link.https://www.ptcusercommunity.com/ideas/5331
Hi Terry,If your assembly is not proprietary, and if you haven't resolved the problem, you can upload the assembly in this discussion for reviewing.
ryankelley, pmaraninchi, or any of the champions,Do any of you know who the product line manager is for Creo, specifically for printing?There are very serious issues with printing in Creo 3. I've done a ton of testing (both with released and unreleased development code) and I'd like share this information with someone on the management side. It's really hard to work through "big picture" issues with tech support.I'll be super nice. I promise. Thanks!
Terry,Import the iges as a solid, save it with a .prt extension, then add the .prt file to your assembly.
That's right. You have to select Import as solid as shown below.
We’re pleased to announce that the Attendee Resource Center is now available. In this portal, you’ll be able to:Browse complete details for 330+ sessions led by 150+ presenters from organizations of all sizes, including PTC and industry experts.Select sessions and add them to your personal agenda.Print, share and email your agenda, and download a calendar feed into your personal calendar.And very soon, you’ll be able to use the new Connect Portal, within the Attendee Resource Center, to search and message attendees and presenters.Your agenda will be automatically populated in the native mobile app and web mobile version when those resources are launched in May.Visit today the Attendee Resource Center to build your agenda and see important event updates. Questions? Ask us!
Předem děkuji, že podpoříte hlasováním tyto funkce:Výběr tažením, na díle (ne v sestavě)Výběr tažením ve všech případech (různé výběry ekvivalent s Creo Direct)Inverzní výběrHlasujte tak, že kliknete na šipku nahoruhttps://www.ptcusercommunity.com/ideas/5572https://www.ptcusercommunity.com/ideas/4556https://www.ptcusercommunity.com/ideas/1777
Dear Champions,Tech Support is currently working on an initiative aimed at improving customers’ experience with our Knowledge Base. One of the components of the initiative deals with how we can help customers finding the knowledge they need to do “the job they are trying to do”. As a consequence, we are planning to classify our knowledge base articles within the following categories (same categories across all product lines)Install (Installation/Upgrade/Rehosting/Licensing)Use (Usage and General Configuration)Customize (Customization and APIs)Improve Performance and StabilitySecure (Improve Security and Vulnerabilities)We’re looking for some customer feedback on the approach and this is why I’m reaching out to youIs this breakdown meaningful for you ? Any missing/overlapping category ?Is this something you think we should also adopt in PTC Community ?Thanks for your feedback/comments/questions/Pierre
Milos,They are using h-elements, and yes, they have problems using a plethora of tets. Creo Simulate uses the p-element, a more advanced smarter element. I've attached a memo from Dr. Ken Short to help explain this.
What does your convergence plot look like for the max von Mises?
It sounds like you've answered your own problem.
You might want to try posting this question under Academic > Schools Program (see below image). If you use Creo Simulate Lite, you don't need an additional license, but I don't know which version you're using.
Quick Check isn’t a convergence method since the model is run only for a single fixed (low) polynomial order (shown below p3-p3). The stress results should never be trusted. What a Quick Check is for is to quickly run the model through the solver in order to pick up any errors that have been made, for example in the constraints. A quick review of the results will also indicate whether any gross modeling errors have been made and possible to point out potential problem areas in the model.
In David and Goliath, New York Times best-selling author Malcolm Gladwell attempts to demonstrate how fundamentally we misunderstand the true meaning of advantages and disadvantages. He asks questions such as: When is a traumatic childhood a good thing? When does a disability leave someone better off?In his keynote at PTC Live Global, June 7-10, Gladwell will use his trademark story-telling style to inspire you to consider the unconventional and act with a sense of urgency to remain competitive today.Prior to and following Gladwell’s thought-provoking presentation, groundbreaking engineering professionals and executives from PTC customer organizations will take the main stage to share their real-world experiences and how they accelerate innovation and infuse passion into their products.A few of these presenters will include:• Brynn Watson, Vice President, Engineering Operations, Lockheed Martin Space Systems Company• David Knight, Global Director, Turf & Utility Platform Engineerin
Mixed mesh is not a problem, as long as it is set up properly. To expedite your studies, I would recomend running quick checks until you get the model to behave properly, then run a convergence analysis.
Short video tutorial of Sheetmetal Extrude feature >> sheetmetal from scratch:Regards,Vladimir
Ryan Kelley,This idea was just posted: Drawing Default Symbol Placement TypeFor some reason I'm not allowed to vote on it. I assure, our maintenance didn't lapse! Tom U.
Steven,I replicated an example (below) using your instructions, and I didn't have any problems with merging, but my model is very simple.
Gautam,You cannot open a Creo 3.0 file in Wildfire 3.0.
Steven,Can you post images in relation to your procedure or attach the model?
Mani,Is your print-out a pdf file?
What version of software are you using?
Martin,Nice to know that there is some consistency in the date codes.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.