Recently active
It is only possible to use uniform scaling (X,Y and Z together). I would like to be able to scale in just one direction (either in X, Y or Z). For example when I have a spring, I need to be able to compress or extend it in one direction (even though I am aware that the windings also scale and become oval). But I also need it sometimes in other situations, like extending a piston pin for example.
In order to support design reviews and detailing using Model Based Definition, Creo Parametric should be able to illustrate LMC (lease material condition) and MMC (max material condition) based on defined dimensional tolerances. A default tolerance parameter could optionally be supplied by the user. We have seen this specified as a contract deliverable requirement for defense contracts. There is currently no way to geometrically represent the LMC or MMC in Creo Parametric. The LMC and MMC states could be represented by transparent overlays or by separate representations. The nominal dimension must not be changed in order to illustrate the LMC or MMC state.Benefits of implementing this suggestion include:Substantial errors in tolerancing can be easily verified by visible review.Minor errors in tolerancing can be identified by a subsequent interference analysis.Model Based Definition requirements to illustrate LMC or MMC state can be supported.If used during
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We design and manufacture high-end electronics. I am the CAD Manager / PTC SME. Stakeholders for this idea include our Creo user community. 2. What version of Creo Parametric are you currently running?8.0.8.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Reference: Article: 387085Ticket: 16762640 SPR: 14468880 When collaborating with our ECAD team, we transfer EMN files back and forth. If we import an EMN file that suggests a slight movement for a component, it will be flagged as a placement change. Even if the user says to 'keep' the placement that was there before, Creo goes through an operation of removing the old component and placing it anew in the old location. By doing this, all references and children fail. This has drastic repercussions including connector cutou
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Industry: Tolerance AnalysisRole: DeveloperStakeholders: Anyone performing a tolerance analysis2. What version of Creo Parametric are you currently running?9.0.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Our application puts Creo into new temporary states (e.g. temporarily moves the position of parts, etc). We need to know when the user switches models, enters new states, etc so we can revert our changes. We are using Creo events to detect this. The one event that is missing that we really need is PRO_WINDOW_CHANGE_PRE (currently only PRO_WINDOW_CHANGE_POST exists).4. What is the use case for your organization?Step 1: User loads model 1Step 2: User loads model 2Step 3: User uses our software to move parts in model 2 into temporary positionStep 4: User switches windows back to model
a new function that can determine if Creo is busy in conjunction with the timer function ProUITimerCreate() is necessary to synchronize both processes (Creo and the callback function of the timer).
Enable the ability to scale an entire assembly like other modeling programs can.Currently users are forced to scale each component separately.Please fix this shortcoming.
When we use "Sel unshare" command to create a Selective instance the panel asks 3 field: 1) Source 2) Name 3) Context It would be useful an Icon to see the choosen context in the model tree to undestand in Which level the change was made. For example: we used "MRID..." for source and "Comodo" for context but we can't see it. I can see the "unshare" icon for source and parents of source that are childrens of context (then "MRID..." and "Albero") . Windchill saves the change on the first parent of the context ("Reggiatrice"). We have to know that the "context" is the first level parent of an "unshare icon" and that the change is active only on the parent of the "context". It's very confusing. ThanksNicola
In the sheet metal module, the part can be assigned to a new material using the "Change material" function. Not only is the part assigned a new material, but the thickness of the part automatically changes when a thicker or thinner material is selected. However, this change does not affect the bend radius of the part, even if the new minimum bend radius is larger than that of the old material. In the following example, the part was assigned a material with a thickness of 2 mm and a minimum bend radius of 0.8 mm when it was created. Now a material with a thickness of 3mm and a minimum bending radius of 1mm is to be assigned to this part. As already mentioned, the sheet thickness is automatically adjusted when the material is changed, but the bending radius is not. As a result, after the reassignment, the minimum bending radius of 1mm for the bend is undershot and must then be adjusted manually. From my point of view, it would make sense to expand the function so th
Several years ago, new ISO standards for symbols, the Geometrical Product Specifications (GPS), were introduced. For example:ISO 10135:2007 - GPS — Drawing indications for moulded parts in technical product documentation (TPD)ISO 8015:2011 - GPS — Fundamentals — Concepts, principles and rulesISO 14638:2015 - GPS - Matrix model However, these standards are currently not supported in Annotation Implementing these new standard should be an integral part of a CAD - It would be important to have these standards available in annotation
Direct Modeling/Annotation does not offer an option for adding an inspection rate including frame to the dimension. We were able to use such a function with AutoCAD LT. The workaround, adding a vertical line "|" and the rate in the Postfix might do the job, but the display is not according to standards. This is dimensioning option which is used by many companies and really should be there.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We're from product development unit of a construction equipment manufacturing company. I'm design manager. Our major stakeholders are manufacturing unit, sales and marketing unit and service department.2. What version of Creo Parametric are you currently running?Creo 9.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.To bring clarity in drawings which are crowded with reference balloons. 4. What is the use case for your organization?While providing reference balloons for fasteners which may include washers, bolts and nuts they need not be shown with separate arrows as it is understanding is clear if bolt is available nut and washers would be available in same place, hence in such cases individual arrows need not be shown for reference balloons. Providing merge option in reference balloons
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Big Electricity. Creo user. Important stakeholders. It shouldn't matter. Are good ideas from less important people worth less to you?2. What version of Creo Parametric are you currently running?83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Double-clicking on text within the cell of a table does nothing. It used to (Creo 6) start editing and place the cursor where you clicked. This behavior still works under one condition: you activate the tab 'View' in the top ribbon. Why this preserves the ability to click into the middle of text to start editing I cannot answer. Will I ever use the View tab to do this? No, because it costs extra clicks. Editing anything but the last letter of a table cell also costs unnecessary clicks. Why must 2D drawing within Creo always the most miserable part of my d
I'm Cad Manager in a watchmaking company. At Richemont we are using the release 8.1 of Creo Illustrate.Several users asking me if it's possible to copy/paste parts directly in illustrate (Edit structure or other), to avoid to import a copy of a pvz.It will be very helpfull for the end-users. We are using Illustrate to create assembly instructions, customer service documents, etc ... The business value will be to win time to create illustrations.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am a manufacturing engineer at a high tech equipment manufacturer. My illustrations are used by technicians to guide assembly.2. What product and version are you currently running?Illustrate 7.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Currently to modify page setup (page size, orientation, border, caption) each figure has to be selected one at a time and updated to the correct format. It would be nice if multiple figures could be selected at once and modified. If this functionality could extend further to include "go to figure view", "do not publish", "rename", etc. that would be very handy.4. What is the use case for your organization?5. What business value would your suggestion represent for your organization?This could save us several minutes per large illustration and would enab
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Automotive industry 2. What version of Creo Parametric are you currently running?Creo 7.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In drawing, views are placed. After drawing creation, I have created the simp rep in part model. I need to change the views as per simp rep. I can't change the representation in the drawing views. Possible to change the representation when i create the new views. but it's not possible to change for existing views. Why?4. What is the use case for your organization?5. What business value would your suggestion represent for your organization?
When moving BOM Balloons on a drawing, constraints (perpendicular, tangent, etc.) highlight and Creo suggests a balloon placement location. While this can be helpful, at times it can be distracting and counterproductive. It would be great if there were both session settings and configuration options to enable and disable this behavior. As far as I'm concerned, it's fine for the default behavior to be turned on as long as the user can disable it at session start with a config option and turn it on/off as necessary during the session.
In Creo Illustrate you can change the line thickness of the leader, but not the size of the arrow heads of the annotation. Also the snapping seems does not seem to be at the top of the arrow, this causes the snap to miss it's target sometimes (see arrow pointing the pin of the piston).These are snapshots from the latest Creo 5.1 F000. So what would be good improvement: ability to change size of arrowheads Snapping of the arrow at the top of the arrow
Instead of having one sequence with 50+ steps, a user wishes to divide this sequence into several sequences e.g. From Sequence 1: Step 1, Step 2, Step 3, Step 4, Step 5, Step 6, Step 7, Step 8 To Sequence 1: Step 1, Step 2 Sequence 2: Step 3, Step 4, Step 5, Step 6 Sequence 3: Step 7, Step 8 This is particularly ideal when using PVI in Vuforia Studio. As of Creo Illustrate 5.1, model parts' location is reverted back to original state when creating new Figures. Therefore when creating Sequence 2 or 3 for upper scenario, a user must manually transform the parts to their last position (in previous Sequence). If there was a way to use the current model state (with manipulated position) when creating New Figures, it'll make it easier for Creo Illustrate / Vuforia Studio users.
To add to Creo View options this possibility: thank you very much
Issue: After editing the business process Standard(s) used for Creo Illustrate any existing Illustration will not adopt the newly modified Standard. To get the new Standard a new Illustration must be created. There's no means for updating/editing the existing Illustration to use the newly modified standard. Business case: Business processes are always changing and it's likely that any Illustration affected by a process change will require modifications. If the process change involves editing or adding content to the Illustration Standard then existing Illustrations need to be modified to adopt the current Standard. Having to create a completely new Illustration just to adopt the modified standard is unacceptable. Request: Change Creo Illustrate functionality to permit Illustrations to adopt/update any modified/current process Standard. Ref PTC article: CS266047
It's not possible to load two drawings at the same time in Annotation. The reason for this request is: Users want to copy texts from one drawing into another. This is only possible with this steps: * load the source drawing * copy the content of the text into clipboard * load the destination drawing * paste the text from the clipboard We already tried to load the destination drawing in Annotation and parallel the source drawing into 2D Access. But if we copy the text into the clipboard, in Annotation it is added as sketch, because it's not possible to copy only the content of the text. It would be nice if a drawing could be loaded as "subpart" in Annotation, like it's possible in Drafting.
Hello, I believe that it would be a game changer if Creo Illustrate could use explode states created in Creo. -Bill
Hello, I think it would be a great idea to be able import item lists created in Creo into Creo Illustrate, Thanks, Bill
Creo View allows you to create a "3D Note" (text at a location in 3D space) by using the interactive [Markup][Note] and [Markup][Note with Leader] functionalities. Using Creo View Java Toolkit, one can create "Point" or "Circle"or "Leader Line" annotations as illustrated in the AnnotationExample.java test application. We would like the annotation APIs to be expanded so that one can programmatically create the equivalent of [Markup][Note] and [Markup][Note with Leader].
Ability to customize BOM with options similar to find/search. At the moment, no option to filter the BOM
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.