Recently active
Can someone help me create a program for exporting parameters to an Excel table using CREO SON? After that, I would like to modify the parameters and import them back."If you need help with specific steps or code related to this task, feel free to provide more details!
Hello everybody I just installed Creo 9.0 on my computer. The installation didn't end well since I have a message saying the installation of virtual c++ redistribuables failed.I could not find the reason why.So I installed directly the visual ++ package, from Microsoft site, and it wen't well.But as I try to launch Creo 9 parametrics 9.0.0.0, with the shortcut that appeared on my desktop, the hourglass briefly changes and return to its normal aspect, and nothing happens : Creo won't start.Could anyone tell me if you see any solution, or even a log file to look into to understand what happens ?Many thanks in advance for your help.
My company is starting to use the wiring side of Creo and to stream line things in the future is it possible to make a template for the harness drawings? I'd like to have the bottom right corner to look similar to how a solid part drawing would look and have tables ready to put the BOM. Is this something that is possible or worth it to save time?
1. Describe the ProblemExternal authentication in Model Manager works via LDAP.According to our cybersecurity specialist, LDAP is critical because the passwords are available in plain text. External authentication should be changed from LDAP to LDAPS. 2. Are you using a workaround?No3. What is the use case for your organization?Secure external authentication in Model Manager4. What impact does this problem currently have on your organization?Passwords are available in plain text and are a threat to cybersecurity.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CreoView ver.11.1 2. What is the problem? The size of the annotation inserted in CAD is displayed small.I would like to be able to change the size on CreoView.3. Are you using a workaround? If yes, please describe it.Yes. Change the size on CAD and then convert to viewer data. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. In the manufacturing department, viewer data may be referenced, and we want to be able to freely adjust the size of annotations that are difficult to see. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) I dont know.
The CAD data is saved on shared drive. When we open the drawings and click on Table Menu, it shows the spinning logo initially and creo goes in not responding mode for around 20-30 min. I am using the Creo 2 M120. I have tested this issue with M070 and it shows the same behavior. This happens on Dell and HP hardware. Any idea or suggestion will be helpful. Thanks in Advance.
I am using CREO 10.0.7.0 and on the drawing sheet. I have to edit a bom table .tbl file to modify the template to my needs.I want to move a column or copy and paste the contents to a new column created at the desired position. I also want to edit the column width to match text size automatically.How can I do this task?
Dear Community,I am currently working with Import Data Doctor (IDD) in Creo Parametric to repair STEP, IGES, and other imported files. However, I am facing issues where the surfaces get stretched, deformed, or the topology changes after the repair process.Could anyone guide me on best practices or techniques to avoid these issues and ensure a clean repair? Any suggestions, workflows, or settings that have worked for you would be greatly appreciated.Looking forward to your insights.
Dear all Does anyone have experience about customize Creo Elements/Direct license server interface ?Customers want to Creo Elements/Direct license server interface show name of user account (same as user Windows log-in name) in Clients tab when client PC using Creo Elements/Direct Modeling (Default show Computer name and ID )You can see as attached file.Kindly guide me how to do . Thank you James
Currently on Creo 10, but I think the question applies to many versions. I want to Creo to execute a script file near the beginning of the mapkey. I can make it work at the end. (The case below is just an example,) I can make it work at the end.mapkey w1 @MAPKEY_NAMEChange display to creo Colors;\mapkey(continued) @MAPKEY_LABELChange to Creo Colors;~ Select `main_dlg_cur` `appl_casc`;\mapkey(continued) ~ Close `main_dlg_cur` `appl_casc`;~ Command `ProCmdRibbonOptionsDlg` ;\mapkey(continued) ~ Select `ribbon_options_dialog` `PageSwitcherPageList` 1 `colors_layouts`;\mapkey(continued) ~ Open `ribbon_options_dialog` `colors_layouts.Color_scheme_optMenu`;\mapkey(continued) ~ Close `ribbon_options_dialog` `colors_layouts.Color_scheme_optMenu`;\mapkey(continued) ~ Select `ribbon_options_dialog` `colors_layouts.Color_scheme_optMenu` 1 `1`;\mapkey(continued) ~ Activate `ribbon_options_dialog` `OkPshBtn`;\mapkey(continued) @SYSTEMC:\\TEMP\\test.bat; But I would like t
How can you propagate layer status of a subassembly into a parent assembly. In other words, when a certain display selection for layers is made in the subassembly, I want the layer display to appear the same way when this subassembly is assembled in its parent assembly. Even with the "propagate status" checked in the layer tool menu, this is not working as expected. It used to work fine in Creo 4, I'm currently using Creo 8.
Hi,I have come with an issue that when I start the protoolkit.dat fie the following error has been shown. I am newbie to this toolkit process and I am learning that think right. Can any one help me with that issue. What mistake I have done?Thank you
I've created several mapkeys lately so I thought I'd share some general tips I learned to write it down for next time. Please share your own tips below to expand the collection. This was done on Creo 3 M060 but the ideas should hopefully be not specific to that.Mapkey Writing/Editing TipsGeneral Tips:Mapkeys often break when upgrading between Creo Versions (Creo 3 vs Creo 1) but they can save you a lot of time in the year or two between versions.Open the mapkey menu by searching for Mapkeys in the upper right. Also, if someone knows how find the Mapkey menu behind when its behind other Creo Windows, please share. Record commands from the RMB or the Quick Access Toolbar to eliminate extra Mapkey lines that just moves around Creo for no reason. Most commands can be launched without being on a specific interface tab.Mapkeys skip any commands they cannot execute. This lets users add in some logic to close menus that sometime popup or d
1. Describe the ProblemI would like the Measurement tool to be able to display multiple units at the same time. For me this almost exclusively applies to IN & mm, but some people like to work in IN & FT, or IN & CM, etc. As shown in the picture below, I suggest augmenting the current Units option with check marks to generate a list of measurements. In my case, that would be 2 measurements, but it could be more depending on the use case. Being able to specify precision (# of decimal places) is also useful for reducing visual clutter. Suggested Measure Tool Improvement2. Are you using a workaround?Currently I take a measurement, then click Options, then click Units, then scroll & click on mm, then click Okay. This isn't a workaround, but it is 4 extra clicks and some visual searching that has to be done multiple times in a given part. Depending on the number of metric parts in the assembly, sometimes I change the units of the assembly to metric, work on those parts,
Provide an API to connect the existing\already opened Creo View session so that I can do some operations. We do not have the option to connect to windchill from Creo view. But we can load files from windchill with "Open in Creo view" action. Once the file loaded into Creo view, let allow the program to connect that creo view session and do some operations. This is possible in Creo Parametric but a limitation in Creo view.
A website opened by clicking a URL hyperlink on a Creo Parametric embedded browser opens a small child window with no address bar. I'm using Creo with windows_browser_type chromium_browser. To meet modern security standards the Creo Parametric application should provide the child window with a location/address bar.
Please add Auto Round for sheetmetal parts and assembly as it is possible for solid parts.
Is there notification/listener function available for mouse events such as single click, double, right mouse click on Creo graphics window in TOOLKIT?
Would like the capability to disable the user from being able to select washers for certain types of screws in Intelligent Fastener Extension (IFX). For example we use Self-tapping round washer head family screws and the washer is built into the head, so we don't want the user adding a washer. Would like some kind of option that you can add to the .dat file for the screw to signify that a washer should not be allowed to be selected.
Ability to hide components in detail view
I want to know the type of variable text set in Symbol Definition Attributes of symbol instance through Toolkit. I could only find APIs related to set and get variable text of symbol instance using APIs ProDtlsyminstdataVartextsSet(), ProDtlsyminstdataVartextsCollect(), and ProDtlvartextDataGet(). However, I don’t see any API to query the type of variable text set. This is required in some cases if I want to compare the old symbol with any new symbol where i have changed the type from integer to text.
STEP files should gradually be improved to try to convey common mechanisms that most CAD packages could translate between themselves, so that when exporting a STEP file with mechanisms defined, the final recipients of the file could eventually be able to use the mechanisms simulations according to the degree of freedom available. Also, it would facilitate when importing neutral file formats of an assembly, if we could read automatically the constraints and limits available. It's a long term goal, since the format is not PTC proprietary, but this goal should be achieved the sooner the possible.
There should be a toolkit API, to get the Zoom and Pan state/matrix for Combined State without disturbing the Graphics/View.
Now, In Windchill, we can export only the list of folders and files available under a specific folder. But If PTC can provide option to export even the files under the subfolders, it will be easy to list down the folder structure of the whole Product design, for Audit purpose as well as for various usage.
Toolkit should support 2D drawing conversion from Creo Elements Direct with option: drawing associative with model. Currently, the Pro2dImportMdlnameCreate() imports 2D data only. There is no API to import 3D model with the drawing through option "drawing associative with model"
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.