Recently active
It would be nice to see Key Editor changes dynamically while they are being made - or edit a keyframe directly in the view window - rather than needing to close the Key Editor before you can see what you've changed. While using Creo Illustrate 5.1 the program had a glitch and crashed. When I reopened the illustrate file, I saw that the path for a pair of pliers was correct, but the orientation was now wrong. The only way I could change the orientation at a specific keyframe was by right clicking on it and opening the Key Editor. This gave me the ability to change the position and orientation at that specific keyframe -- however the preview window did not update until I closed the Key Editor dialog box. Please see attached screen-shot. Thanks, Wes
Presently the cross for the grid points is seven pixels. This can make text and symbols difficult to see, unless they are large or turned off. Most monitors (LCD) can show a single pixel clearly so that size cross is no longer needed for visibility. Allow a setting that sets the number of pixels for the cross. Example of the difference in readability for 7 pixel grid points and 1 pixel grid points. Some laptops have small enough pixels that they may be difficult to see with 1 pixel points. 3 pixels should be visible and still less obstructive of the design.
Creo View Mobile, the App for Iphone, should open .pvz files with Combined States and 3D Annotations. The current Creo View Mobile can´t open these .pvz files, so it has no use for the MBD enviroment. Best regards, Nekane
Marked up dimensions on 2d drawings of Creo view report the size according to the drawing scale. On a drawing there may be many views that do not correspond to the same scale and hence would not match the actual real value. We need the ability to override the dimensions so that we can properly markup a drawing. If I cannot change the value the tool becomes nearly useless because in drawing with multiple scales I cannot dimension any missing dimensions on the marked up print. More flexibility in the mark up tools would be helpful in using the tool.
several of our customers want Illustrate to automatically insert changed parts to the already existing position and not to add it at the bottom of the sbom where they subsequently have to be manually positioned
Current situation: After importing an FBX-file in Creo Illustrate 5.1, the complete hierarchy of the original file is lost / reduced to the first level. The same FBX-file was also imported to Autodesk Maya. Here the structure in the outliner is correct. Target situation: After importing an FBX-file in Creo Illustrate 5.1, the complete hierarchy of the original file is shown, too.
Would it be possible to make a "snap" functio so that callout leader lines an be straight vertical or horizontal? Some illustration guidelines demand horizontal callout lines, and this has to be eyeballed in Creo Illustrate at this time.
Currently in Creo Illustrate 5.1 you can apply a filter , f.e. *bolt*. But there is no possibility to select them all at once (ctrl+a) of a list selection (shift - select top/end). Because this selects all the "Siblings"/ other parts in sub-assemblies as well, they are just hidden by the "click to expand arrow". Please make it so that we can easily filter and select in a logical fully functional way.
In creo Illustrate 5.1 if you export a 3D-PDF from a figure , it exports the entire assembly. This is an issue when you have an entire machine, and a figure of for example a coupling. Exporting the coupling instruction on a figure results in a large size PDF with all the part hidden. These hidden parts can be set visible, and so IP of the design shown as well. Please add an option only to export the visible parts of a figure to 3D-PDF.
Cabling Parameter (REFERENCE DESIGNATION) feature is appearing as a annotation in Creo parametric, In Creo View, cabling Parameter value get uploaded but annotation is not appearing. Requirement is the cabling parameter needs to be displayed as a annotation in Creo View as like in Creo Parametric so that it’s very easy to do the document preparation with surrounding environment.
Modelcheck is able to identify objects that have non-standard primary units. It is NOT able to identify objects which have been assigned a custom System of Units. We perform a lot of analysis operations on our Creo models, and it complicates life for us if users assign a custom System of Units.
Please add the ability to check for Creo Update Controls settings on external references. A company may want to not allow some of these settings. Example - choosing not to allow Automatic Update but allow Manual Update and No Dependency.
Currently, Modelcheck can check what "date code" of Creo generated the file. The date code is specific to a single build. I just want to see what version of Creo was used (e.g. Creo 4 or Creo 5).
When creating a CAD object in Creo Parametric there is no warning or error message when an unacceptable parameter value is entered for user defined parameters that have a predefined list in the start part. When an unacceptable value is entered input appears in the field but in reality the parameter remains undefined causing problems down the road. Users are misled because the value appears assigned. Currently there is no prevention or status feedback. Use Case The parameter is associated to a required constrained Windchill attribute that has more values on its list than the Creo Parametric assembly or part. It’s set that way because drawings utilize those extra values. So a user (who thought s/he assigned the value) ends up having to reassign the attribute in workspace prior to check-in. Here comes the kicker. The user assigns a value that should not be assigned to an assembly or part, a value that is only meant for drawings. The asse
Creo 4.0 now reads the unit of imported DXF files in 3D models (defined by value of $INSUNITS) So if the DXF unit is not the same as your part setup, the geometry is wrongly scaled. Unknown problem in previous releases... PTC workaround is to edit the DXF file to change the $INSUNITS value. Not acceptable for users in 2019. Please provide import conversion functionality for this case, as it exist in other softwares... Thanks.
allow for offset surfaces to be created at a selected reference instead of being controlled by a dimension only.
we have recently upgraded to Creo 4 and we have learned how to work with the annotation feature. It is convenient to place all datums, geometric tolerances and surface finishes on the model and just press "show annotation" on the drawing and drag them to the desired location. What is frustrating about that is that we did not manage for some surface symbols to be dragged out of the geometry. Most symbols can be dragged along the dimension witnessline to make them clearly visible. Some just remain on their sometimes tiny surface within the geometry which makes them hard to read. Why can't this be changed that the symbols are all able to drag a symbol witnessline along the dimension witnessline, same as it works for geometric tol symbols or datum symbols?
We are using imperial threads a lot, e.g. 3/8-16 UNC. When we create it with the hole manager and select it on the drawing with "show model annotation" we can only see the nominal metric dimension. We would like to see the actual thread name, like mentioned before. We know that it is possible to show the thread note on the drawing, but this is not the way we want to show the dimension of a thread on the drawing. According to VSM standards compendium it is allowed as simplified dimension but we usually create drawings not simplified. With a created (added dimension) on the drawing it is possible to replace @D with @o and then type the threads name. Why isn't this possible with a driven dimension from the model? In this case with the thread mean diameter?
Curves exported from the drawing (drw) are segmented when saved-as STEP format. Curves are "correctly" exported to STEP format when saved-as from part (prt). Thank you for finding a way to correctly export non-segmented curves from drawings to STEP format.
FEM calculations should provide more valid results in earlier development phases of a component than with sharp-edged models. For this purpose, it is necessary to completely round incompletely modelled packages. This should be done automatically with the AutoRound function, since there is no possibility for manual modeling of these roundings.The AutoRound function of the PTC in Creo Parametric (Ver. 4.0 Mxxx) does not meet expectations.
Currently skeletons cannot be moved from one assy to another using the restructure command. The skeleton can only be deleted from the first assy and then reassembled to the second. This is an issue if an internal copy geometry has been made to the skeleton within the assy from another model. Enable the restructure command to be applicable to skeleton models and retain all internal copy geometry between the skeleton and all other models within the assy hierarchy when the skeleton has been restructured.
I think title says all.Bye
I mean the opportunity to suppress/unsuppress components "only in simulate environment", as now happens with the Remove feature (see pic).
API ProsolidMasspropertyGet() properly returns the COG calculations with a selected coordinate system, but neither this nor any other API gives the option to change the mass property calculations/attributes (pro_mp_mass, etc) to a new coordinate system.The only way currently to change this is through File -> Prepare -> Model properties -> Mass Properties -> Select CSYS -> Calculate, which is cumbersome to get to.
Current Detail View notes create "DETAIL__X", "SCALE__XX". Users must manually remove the double spacing between detail and letter callout in the view note for every view. Please allow this to be globally set to remove the double spacing.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.