Recently active
PTC Developers, When can we have full control through the model tree? This includes renaming items whether they have been checked in before or not, mass properties management, etc. Changes and management on-the-fly using the graphics window and model tree desperately needed for end users. Thank you. Bill
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0.82. What is the problem? Presence of relation information missing in real time : in feature, note , sketch ....3. Are you using a workaround? If yes, please describe it.Apply spécific character (manual) or specific suffix name 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.When you open a 3d model with many features it is very productive and effective to read directly relation presence5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)200 users, 30 minutes to find all the informations per user and approximately 18000 hoursWith 18000 hours, each user could learn more about CREO and other useful toolsSYMBOL PROPOSAL:
Currently when exporting DXFs you need to edit the export environment for dxf with every launch. Otherwise it defaults to Current sheet as model space. I realize a mapkey could work, but I would rather have it as a config option.When All sheets as paper space is selected the dxf exports all sheets to a single file. This is my preferred default.
If you Copy a configuration in Modeling, the name of the configuration should be copied, too. It should be the same behavior than with copy parts.
Multiple selection should be possible when copying configurations in Creo Modeling. At the moment only individual selection is possible. Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- Mehrfachauswahl sollte beim Kopieren von Konfigurationen möglich sein in Creo Modeling. Zur Zeit ist nur Einzelauswahl möglich.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CREO Version 7.0.12.02. What is the problem?I have a lot of problems, but we'll concentrate on this one... Unlike Solidworks Camera View, Creo Manikin lacks including but not limited to field of view, camera type, positions, depth of field, target points, and camera rotations to perform visual analysis through its camera lens.These limitations have prevented our top-level design team from using CREO as the main CAD tool and constantly resort to using Solidworks to perform camera view analysis.https://help.solidworks.com/2023/english/SolidWorks/sldworks/HIDD_DVE_CAMERA_PROPS.htm?verRedirect=13. Are you using a workaround? If yes, please describe it.Solidworks Camera view in Solidworks. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Camera view analysis
I have a desire in Creo View Bill of Material to be able to sort by multiple columns. Reference Case C14967682 Image shows the area of the User Interface I'm wanting to have increased Sort functionality. It is currently limited to one column in Creo View 5 Image shows functionality I'm looking for in the table in Creo View.
Hi all, i want change the thickness of callout cricles. The Standard is to thick and the user must Change this manuel in Photoshop or other software Tools. Ist make sense, that we Can finished this directly in Creo Illustrate.
Allow Creo View to post Augmented Reality creations directly to an on-Premise Vuforia Experience Server.
We need two drawing options for the standard offset of manually created snap lines (see Article - CS48469 or Community Thread) The Creo standard offset is 12,7 and increment 9,5250 -> in every case we need to change them.
Breaking a wire (using the cross sheet graphics to identify the other end) is frequently done to declutter lines within a sheet. IE: it does not cross between sheets. A more descriptive name would help.
Hello everyone, I think it should be good if it will be possible to change the configuration standard file (.zip) of an existing illustration. For example to add new elements in this illustrations if a new Config standard file is defined with symbols, annotations, insets, ... Regards
We use Simplified Reps often to create the views with the components needed. So far using Creo Illustrate 5 I have not been able to use any simplified reps and import the PVZ into Illustrate. This lack of functionality (or absence of how to get this) has caused us to bypass Illustrate and use Exported images from Creo Parametric Drawing and import these images into Adobe Illustrator.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.All our clients using Creo Parametric2. What version of Creo Parametric are you currently running?Creo Parametric 7.0.x.0 to 10.0.x.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.At the moment the primary way to assemble a component in an assembly is by using the Assemble button.What I wish to request is an alternative way that enables faster assembling of components (who are opened in session) into an assembly (that is also opened in session) by making use of the existing copy paste buttons: Of course after pasting the part into the assembly, you would then need to define the constraints (similar to when you're using the Assemble button after choosing a component in the File Open dialog window)Unfortunately, the method described above is not yet possible.4. What is the use case for you
Advanced Material Color - Ability to add colors using HEX codes. It would be good to have the ability to color components per the material color specified for the production product.
When viewing ECAD data from Zuken or IPC-2581 format the silkscreen layer in CREO view does not allow us to differentiate between the REAL silkscreen that is being printed on the end product and silkscreen that COULD be printed on the end product but isn’t. What I think should be done is the silkscreen layers from Zuken should be layers symbol A and symbol B only and symbol A-1 and symbol B-1 should be on a separate layer named something else like assembly data which is really what it is. Right now you have no layers that show the assembly layers of the board and they get stuck in the miscellaneous layer section attached. All you have is a package boundary layer which isn’t very useful. The assembly layer and symbol A-1 and B-1 have the same assembly information except the symbol A-1 and B-1 layers have additional silkscreen information as well. Either 1 of these layers could be used to make a new assembly layer in the CREO view predefined list and then the silkscreen layer would only
Problem: Changes to assembly properties should be saved at the part level. Visibility, Color, Position Otherwise changes to properties of parent or child (assembly or part) may conflict - with odd results. Here's one way to see this error: Time (seconds) Item Action Visibility 1:00 - 2:00 Part B Fade Out True -> False 2:00 - 3:00 Assembly A (contains all) Fade Out True -> False 3:00 - 4:00 Part B Fade In False -> True 4:00 - 5:00 Assembly A Fade In False -> True Part B fades out, but immediately at time = 2:00 Part B suddenly reappears and then fades out again. Whatever causes this is the crux of the problem. It's not a big issue in this particular example, but in other situations it expresses itself in more frustrating ways that cause problems with our augmented reality training for technicians. Sometimes a multi-part tool will stay visible in the wrong steps because its visibility Boolean was messed up somewhere along th
Currently: When publishing annotations from Creo Parametric to Creo View, the fonts are changed to the Creo View font. This is not a monotype font, so the careful alignment and presentation of the annotations is lost. The only workaround is to use the tessellation option in the recipe file, which results in an accurate display of the font in Creo View, but it is tiny and difficult to read. Example: Creo Parametric: Creo View (Default): Creo View (Tessellation): Creo View (Text as Lines): Creo View is seen as a kind of "pdf" of Creo models, presenting them for review, presentation, and even manufacturing support in the absence of a drawing (MBD). As such we need to be able to use our company standard font, and to have it displayed correctly as set up in Creo Parametric.
Currently, the software for Creo Parametric 4 will NOT read in external model accuracy when Use Templates is Checked. The software assumes you want to use the model accuracy in the start parts if the box is checked an d basically ignores the model accuracy setting. This is a bad assumption as we want to match the model accuracy for best results from the import model while retaining all other start part features(datums, layers, relations, attributes, simplified reps, view orientations, materials...the list goes on). Reference PTC Case C14869029 With the settings as highlighted below, I want the model accuracy to match the external model.
Material data files of form .mtl currently do not support storing the experimental data points used to define the material hardeneing. Article CS253339 The idea is to update the .mtl file format to allow storage and retrieval of this information. Also, for any data even without the experimental data, add the ability to graph the stress strain curve like when the experimental data is present.Stress Strain Curve even when no experimental data
I've been trying to find a ModelCheck for when an object in an Creo assembly has its Windchill state at Canceled, Obsolete, etc. (or whatever a company might have for States) and prompt the user with an error or warning when they try to use them in an assembly. Please add a check that checks the parameters of sub components in an assembly so this would be possible.
Hello, Is it possible to add the capability to apply an acceleration load on a component in an assembly. It could be interresting to Apply diifferent acceleration values into an assembly. Thanks
It would be nice if you may have the elements coloured differently. For example taking the same colour of the CAD part and with a light differentiation of intensity to differentiate tetra, wedge and brick.
My suggestion is to permit to use the mapped mesh previously defined over the single component (or group).At the moment the program can use only one mapped mesh that must be defined locally, so it doesn't consider other mapped mesh already present within assembly's components.
I think it is time for RuleCheck to get upgraded. Here are some simple ideas that would be great! Allow for names longer than 19 characters Allow for more robust naming conventions (ie with spaces) Allow for custom groups Allow for soft and hard types to be expanded by default automatically Allow for additional custom attributes (like 'date added' instead of version) Allow for hard rules to be reset based on certain conditions (revised models, new versions of the that specific rule) Allow for rules to be based on WindChill life-cycle Create a GUI interface within Creo to easily create rules; especially if we want to have some fancy tables, links, embedded content, etc. Allow for a conditions file that can run certain rules based on conditions (like modelcheck) Allow for conditions to add rule files together (to avoid duplicating a lot of rules for the slight variations between scenarios). For instance, we may have 5 basic rules for sheetmetal. Then we may have 2 different rules
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.