Recently active
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.design of construction of mould2. What version of Creo Parametric are you currently running?Creo 8.0.3.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Sorry for my English.During the restructuring phase of components imported from step, with sub-assemblies with the same name but in different assembly positions, the contained parts are restructured for a sub-assembly while for the other sub-assemblies the parts disappear (see attached video). The new idea is to have a flag (to be activated if need) that allows in the import phase to give a distinguished name for the repeated sub-assemblies.Fausto4. What is the use case for your organization?restructuring phase of components imported from step5. What business value would your suggestion represent for your organization?higher speed in the execut
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 7.12. What is the problem?I have a selection set with 20 bolts. I want one call out for all the bolts. The callout defaults to the part number that is first in the sBOM. I want to move the call out to a different bolt within the selection set.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I have a large assembly that needs to be viewed at a certain orientation. This large assembly has 1000+ bolts and they all have the same part number. I want the callout to be viewed from this specific orientation. When I create the callout, it defaults to a bolt that cannot be easily viewed by the orientation. I cannot move the callout. 5. What impact does this problem currently have on your organization? (Number o
Hello,It would be more useful that the default name given for Shrinkwrap Parts could be derived from the assembly name even if a simplified representation is active. “model name” + (”name of representation if model is displayed in Simplified Representation”) + ” sw000x” Currently, the default name for Shrinkwrap Parts is derivedfrom model name, if model is displayed in Master Representationfrom name of representation, if model is displayed in Simplified Representation This current naming convention using name of representation if model is displayed in Simplified Representation is an exception for all the Creo parametric Exports. Our assembly templates have defined Simplified Representation and we activate them for Shrinkwrap exports. We need to systematically change the suggested name. Default name for Shrinkwrap Parts should be derived from the assembly name
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 8.0.7.02. What is the problem?Creo 8 introduced the Inseparable Assemblies. PROTOOLKIT and Jlink don't have API to know if an assembly is inseparable or not. PROTOOLKIT has a workaround described in the article CS389461: Toolkit: Is it possible to determine whether inseparable objects are used in an assembly in Creo Parametric and Windchill? 3. Are you using a workaround? If yes, please describe it.No, is not available.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We have a customization that read the part or assembly members of the assembly. With inseparable I have now some nullpointerexception, I would like to ignore inseparable children.5. What impact does this problem currently have on your organization? (Number of users affected, hours of los
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?8.0.5.02. What is the problem?Broken Views3. Are you using a workaround? If yes, please describe it.I create an actual broken part "REP".4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I would help display multiple layers or laminates.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It would help to provide a better visualization of the component or components.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. - We are a contract manufacturing company, and as such need to work in whatever design package our customers utilize. Our designers have multiple versions of Creo installed. Our engineers would like to update the Creo icons to include the version number. Similar to how SolidWorks icons differentiate their version icons 2. What version of Creo Parametric are you currently running?4, 5, 6, 7, 83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. With multiple CAD files open in different versions of Creo it is hard to differentiate the files in the taskbar.4. What is the use case for your organization?We often work between different versions of Creo.5. What business value would your suggestion represent for your organization?Lost time and frustratio
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 8.0.7.0 and Creo Parametric 9.0.4.02. What is the problem?Then wanting to use the "Copy Position" feature in the Edit Position mode of the exploded views, the user must do extra clicks to get to the Copy Position feature. The user must select the "Options" tab, then select "Copy Position" button. Then the user can finally begin to use the Copy Position feature. This causes unneeded clicks and frustration. Alternately, instead of making a new tab, the "References" tab could have an extra box added to the bottom below "Movement References" for the "Copy Position From" box. Combine the two basic move and the copy position boxes into a simply interface.3. Are you using a workaround? If yes, please describe it.No work around, a mapkey could be made, but shouldn't be needed.4. What is the use case for
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo Parametric 7.0.10.2. What is the problem?Today, window size is scalable via several configuration options but the range is not enough. According to CS31876, the total window scale will remain at 50% when using all suggested setting in their max values. Especially on large ultra wide screen monitors, the width can exeed 50%.We would appreciate a wider range for setting window scale to gain smaller values via existing or new config options.CS31876:https://www.ptc.com/en/support/article/CS31876?source=search)3. Are you using a workaround? If yes, please describe it.No WA yet but change window size by pulling at each creo start4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We would appreciate a wider range to set window scale to gain smaller values via existing or new config op
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 7.0.10.02. What is the problem?Would like to auto populate the x, y, & z values of a selected row within the "offset coordinate system" feature, by selecting a point in the model space. 3. Are you using a workaround? If yes, please describe it.I have two work around options.Option 1:insert a new coordinate system in model space, where I want the new point to bein the model tree move the new coordinate system above the offset coordinate system featureopen the offset coordinate system.update reference coordinate system to the new coordinate systemchange x, y, & z values of selected row to 0revert reference back to original coordinate system. Delete the new coordinate system.Option 2:Open the measure tool and select a point in model space where I want the new point to besave measurement using "save analysis."open the offset coordinate system.ind
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?8.0.8.02. What is the problem?When you create a sketched assembly hole pattern you can't reference the hole geometry and create a reference pattern like you can for a sketched part hole pattern.The problem is covered in article CS3441623. Are you using a workaround? If yes, please describe it.You have to reference the axis of the hole instead of the cylinder geometry4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We have component placements for our screws that reference cylinder geometry and we have to break them when using assembly holes in order to use the reference pattern. It works with a normal part hole feature so it makes no sense it wouldn't work with the assembly version.5. What impact does this problem currently have on your organization? (Number of user
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?8.02. What is the problem?When selecting geometry/features belonging to a point pattern, the dimensions shown are the ones of the first member of the pattern. The dimension is just copied and pasted to the other members, but more often than not, these dimensions make no sense and have no value for the other pattern members. 3. Are you using a workaround? If yes, please describe it.Instead of selecting the geometry/feature from the point pattern you can go manually to the 'Section' where the points were drawn and adjust dimensions there. Another option is to select the pattern itself. Both of these solutions however require you to go to the model tree instead of keeping your focus on the model istelf.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In the case of a point p
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?8.0.8.0 2. What is the problem?Reference: Case: C16962197 Article: CS397024 There should be an option that controls angular dimension decimal places for ALL angular dimensions in Creo, even those created in the sketcher. Right now the sketcher dimensions all have the same number of decimal places, even the angular ones! In today's MBD world, this seems to be a gap. Please help fix! 3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We were trying to work with Creo Parametric files we received from another company. However, their default decimal places were different than ours. With our configs, we were seeing issues with incorrect tolerances for angular dimensions from sketches. 5. What impact does
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CREO VIEW EXPRESS 9.02. What is the problem?When I export a CREO PTC assembly as .edz file and open the .edz in CREO VIEW, the model tree groups dissapered3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It would create a way better overview of components in the assembly and where they are used in the assembly. Viewable for my collegues that dont use CREO PTC5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Hard to guess. I think productivity/effectiveness would rise by 300% (three times as fast checking designs)
Please include detailed documentation such as screenshots, images or video. 1. What product and version are you running?Creo Parametric 7.0.9.02. What is the problem?When creating a pattern along an axis there is a "Number of members" and a "Angle between members". In almost all cases you want to space the number of members equally along 360 degrees. But this angle between needs to be manually "calculated". So if you have 3 members you need to fill in 120 degrees for the angle between. The solution would be to set the full 360 degrees as default. There is a 360 degrees field but it is grayed out, it's not clear why it's there and what's the use of it.Also it is possible that holes are overlapping, when you use 6 members and 120 degrees as angle between.3. Are you using a workaround? If yes, please describe it.Do the math yourself.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Work smar
Please include detailed documentation such as screenshots, images or video. And WTF is 13.33 the default offset? 1. What product and version are you running?Creo 7.0.9.02. What is the problem?In a lot of cases holes are in a pattern. This pattern is in a lot of cases mirrored across the planes. Would be really helpful if you can mirror a pattern. Mirroring a hole is not helpful because then it's not a pattern, you have to mirror the mirror to get 4 holes, mirroring is not always stable and mirroring is not always editable.3. Are you using a workaround? If yes, please describe it.Using dimensions and calculate the double distance and if it changes edit at least two dimensions.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Work smarter not harder.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Work smarter
Our Customer uses Creo, Solidworks, Inventor and Revit and Autoplant 3D . They build complete facility layouts and therefore need to use Creo unite set as a positioning assembly to keep the creoview files updated easily. currently Creo Unite does not have the ability to add Revit Or Autoplant 3d files. without this functionality, Our customer has to convert Revit and Autoplant 3D files to Inventor so they can be added to a Creo unite Assembly
When using CreoView to markup a 2D drawing it would be nice if there was a way to copy and paste an existing view and also things like notes. It can be a common practice when doing a markup to take some existing part of the drawing, copy it to a new location, and add a note about what should be done. For example a view may be copied to indicate the view must be moved to a new location or a similar view created in the new location. Many 2D PDF editing/markup tools provide a way to take a snapshot and then paste that snapshot back onto the 2D PDF.
Hello, Right now it's not possible to select which side of the section we want to keep when we try to do a quarter section.All of the time Creo Illustrate keep the 3/4 of the model...So I would like to keep only 1/4 You can see my expectations in the attached file. Thanks
I would like to be able to select a feature from the tree or graphics window and select a command to add to a layer. Example: Select feature or features RMB and select "Add to Layer" Select desired layer from list This would make it a lot easier to add items not captured by rules to a layer.
It would be very useful the possibility of adding pdf documents, external videos or hyperlinks into animations and sequences of Creo Illustrate.
View and Illustrate need to support Creo Parametirc Appearance States and need to do so through the conduit of PDMLink Visualization. So that specific Creo Parametric Appearance States can be defined to be used for Illustrate GD EPMDocuments.
I finally found one feature in Creo View that would make it much more popular in our organization (it's not used much today). In Creo View 6, PTC refined the Compare Assembly feature significantly. When combined with the new "Open in Creo View" added to the Windchill History tab in Windchill 11.2 it looks like it's easy to compare CAD assemblies for the first time. However, as far as I can tell, PTC has only implemented the compare feature in Creo View MCAD. The Compare feature should be available for all Windchill/Creo View Lite users (we've already paid for Creo View Lite)! This feature would be used all the time and would help prove the value of Windchill/Creo/Creo View in an organization (and likely help sell more licenses of Creo/Windchill/Navigate).
Apparently, when sending an IDX baseline to the ECAD team, ECAD Validate doesn't allow notes. The note functionality is only for proposals. How can the MCAD team send notes to the ECAD team? We need a mechanism that will allow us to have the process. We want to specify notes like clipping leads, applying epoxy, bending some tall components, etc.
When adding or editing a Note in Creo View, there is no option to change the Font or Size of the text. Consider adding enhancing this functionality by adding the option to change Font and Size of the annotation text.
Add other languages to Creo Simulate and Creo Flow Analysis like French, Italian, Spanish, Russian etc. etc.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.